A Youjo Senki fangame for the CPC#26
25개 이상의 토픽을 선택하실 수 없습니다. Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

85 lines
2.8 KiB

#---
# fxSDK project configuration file for cpc26
#---
# Project name, should be at most 8 bytes long.
# (You can also specify NAME_G1A or NAME_G3A to override individually.)
NAME := cpc26
# Internal name, should be '@' followed by at most 7 uppercase letters.
# WARNING: If this convention is not followed, the add-in might not appear in
# the main menu of the calculator!
INTERNAL := @TWOSIX
# Output file name. The default is to take <NAME>, replace spaces with dashes,
# and add .g1a (or .g3a). You can specify a different folder if you want.
TARGET_FX :=
TARGET_CG :=
# fx-9860G icon location
ICON_FX = assets-fx/icon-fx.png
# fx-CG 50 icon locations
ICON_CG_UNS = assets-cg/icon-cg-uns.png
ICON_CG_SEL = assets-cg/icon-cg-sel.png
#---
# Toolchain selection
#---
# Toolchain for fx9860g. Please see also CFLAGS_FX below.
TOOLCHAIN_FX := sh-elf
# Toolchain for fxcg50. Please see also CFLAGS_CG below.
TOOLCHAIN_CG := sh-elf
#---
# Compiler flags
#---
# Base compiler flags for the fxSDK, you usually want to keep these.
CFLAGS := -mb -ffreestanding -nostdlib -fstrict-volatile-bitfields
# Platform-specific compiler flags.
# <> If you are using sh3eb-elf, use -m3. (You can do this on both FX and CG.)
# <> If you are using sh4eb-elf, use -m4-nofpu. (Not ideal on FX but works.)
# <> If you are using sh4eb-nofpu-elf, then your compiler will likely use the
# FPU and cause problems on the calculator. Consider another configuration.
# <> If you are using an sh-elf with several targets, specify whichever you
# support. I recommend -m3 on FX and -m4-nofpu on CG.
# Please see also TOOLCHAIN_FX and TOOLCHAIN_CG above.
CFLAGS_FX := -D FX9860G -m3
CFLAGS_CG := -D FXCG50 -m4-nofpu
# Additional compiler flags, change to your own taste!
CFLAGS += -Wall -Wextra -Os
# Include paths. Add one -I option for each folder from which you want to
# be able to include files with #include<>.
INCLUDE := -I include
# Libraries. Add one -l option for each library you are using, and also
# suitable -L options if you have library files in custom folders. To use
# fxlib, add libfx.a to the project directory and use "-L . -lfx".
LIBS_FX :=
LIBS_CG :=
# Base linker flags for the fxSDK, you usually want to keep these.
LDFLAGS_FX := -T fx9860g.ld -lgint-fx $(LIBS_FX) -lgint-fx -lgcc
LDFLAGS_CG := -T fxcg50.ld -lgint-cg $(LIBS_CG) -lgint-cg -lgcc
# Additional linker flags, if you need any.
LDFLAGS :=
# Additional platform-specific linker flags.
LDFLAGS_FX += -Wl,-Map=build-fx/map
LDFLAGS_CG += -Wl,-Map=build-cg/map
#---
# File conversion parameters
#---
# Here you can add fxconv options for each converted file, individually.
# The syntax is "<type>.<file>". For example, to specify the parameters for a
# font named "hexa.png", you might write:
#
# FONT.hexa.png = charset:print grid.size:3x5 grid.padding:1