PythonExtra/ports/esp32/boards/manifest.py

freeze("$(PORT_DIR)/modules")
include("$(MPY_DIR)/extmod/asyncio")

# Useful networking-related packages.
require("bundle-networking")

# Require some micropython-lib modules.
# require("aioespnow")
require("dht")
require("ds18x20")
require("neopixel")
require("onewire")
require("umqtt.robust")
require("umqtt.simple")
require("upysh")
tools/makemanifest.py: Eval relative paths w.r.t. current manifest file. When loading a manifest file, e.g. by include(), it will chdir first to the directory of that manifest. This means that all file operations within a manifest are relative to that manifest's location. As a consequence of this, additional environment variables are needed to find absolute paths, so the following are added: $(MPY_LIB_DIR), $(PORT_DIR), $(BOARD_DIR). And rename $(MPY) to $(MPY_DIR) to be consistent. Existing manifests are updated to match. 2019-10-16 06:12:39 +02:00			`freeze("$(PORT_DIR)/modules")`
extmod/asyncio: Rename uasyncio to asyncio. The asyncio module now has much better CPython compatibility and deserves to be just called "asyncio". This will avoid people having to write `from uasyncio import asyncio`. Renames all files, and updates port manifests to use the new path. Also renames the built-in _uasyncio to _asyncio. This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2023-06-08 07:51:50 +02:00			`include("$(MPY_DIR)/extmod/asyncio")`
esp32/boards: Merge manifest_release modules into standard manifest. Having two separate manifests is confusing. It's simpler to have the daily builds use the same configuration as the stable, release builds. Signed-off-by: Damien George <damien@micropython.org> 2022-08-30 03:14:32 +02:00
ports: Make all network-capable boards use bundle-networking. This will ensure that any board with networking support gets: - webrepl - mip - urequests - ntptime This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> 2023-01-27 04:17:19 +01:00			`# Useful networking-related packages.`
			`require("bundle-networking")`

all: Update all manifest.py files to use new features. Changes in this commit: - Manifest include's now use the directory path where possible (no longer necessary to include the manifest.py file explicitly). - Add manifest.py for all drivers and components that are referenced by port/board manifests. - Replace all uses of freeze() with package()/module(), except for port and board modules. - Use opt=3 everywhere, for consistency and to reduce code size. - Use require() instead of include() for all micropython-lib references. - Remove support for optional board-level manifest.py in mimxrt port, to make it behave the same as other ports (the board must set FROZEN_MANIFEST to a custom manifest.py, which can optionally include the default, port-level manifest). - Also reinstates modules that were accidentally removed from the esp8266 512k build in fbe9417b90474dd1a08749b3a79311a8007a98fb. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> Signed-off-by: Damien George <damien@micropython.org> 2022-07-15 15:46:28 +02:00			`# Require some micropython-lib modules.`
esp32,esp8266: Add support for the Espressif ESP-NOW protocol. ESP-NOW is a proprietary wireless communication protocol which supports connectionless communication between ESP32 and ESP8266 devices, using vendor specific WiFi frames. This commit adds support for this protocol through a new `espnow` module. This commit builds on original work done by @nickzoic, @shawwwn and with contributions from @zoland. Features include: - Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO. - Signal strength (RSSI) monitoring. - Core support in `_espnow` C module, extended by `espnow.py` module. - Asyncio support via `aioespnow.py` module (separate to this commit). - Docs provided at `docs/library/espnow.rst`. Methods available in espnow.ESPNow class are: - active(True/False) - config(): set rx buffer size, read timeout and tx rate - recv()/irecv()/recvinto() to read incoming messages from peers - send() to send messages to peer devices - any() to test if a message is ready to read - irq() to set callback for received messages - stats() returns transfer stats: (tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts) - add_peer(mac, ...) registers a peer before sending messages - get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt) - mod_peer(mac, ...) changes peer info parameters - get_peers() returns all peer info tuples - peers_table supports RSSI signal monitoring for received messages: {peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...} ESP8266 is a pared down version of the ESP32 ESPNow support due to code size restrictions and differences in the low-level API. See docs for details. Also included is a test suite in tests/multi_espnow. This tests basic espnow data transfer, multiple transfers, various message sizes, encrypted messages (pmk and lmk), and asyncio support. Initial work is from https://github.com/micropython/micropython/pull/4115. Initial import of code is from: https://github.com/nickzoic/micropython/tree/espnow-4115. 2020-09-24 07:37:04 +02:00			`# require("aioespnow")`
ports: Use micropython-lib version of drivers in manifests. 2022-09-06 05:49:41 +02:00			`require("dht")`
			`require("ds18x20")`
			`require("neopixel")`
			`require("onewire")`
all: Update all manifest.py files to use new features. Changes in this commit: - Manifest include's now use the directory path where possible (no longer necessary to include the manifest.py file explicitly). - Add manifest.py for all drivers and components that are referenced by port/board manifests. - Replace all uses of freeze() with package()/module(), except for port and board modules. - Use opt=3 everywhere, for consistency and to reduce code size. - Use require() instead of include() for all micropython-lib references. - Remove support for optional board-level manifest.py in mimxrt port, to make it behave the same as other ports (the board must set FROZEN_MANIFEST to a custom manifest.py, which can optionally include the default, port-level manifest). - Also reinstates modules that were accidentally removed from the esp8266 512k build in fbe9417b90474dd1a08749b3a79311a8007a98fb. Signed-off-by: Jim Mussared <jim.mussared@gmail.com> Signed-off-by: Damien George <damien@micropython.org> 2022-07-15 15:46:28 +02:00			`require("umqtt.robust")`
ports: Use micropython-lib version of drivers in manifests. 2022-09-06 05:49:41 +02:00			`require("umqtt.simple")`
			`require("upysh")`