stm32/octospi: Add support for dual-line SPI interface.

And fix the case of 32-bit addresses in single-line mode.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2023-09-13 16:05:00 +10:00
parent ee5e594472
commit 60e0ef6ef6
1 changed files with 21 additions and 1 deletions

View File

@ -272,16 +272,36 @@ STATIC int octospi_read_cmd(void *self_in, uint8_t cmd, size_t len, uint32_t *de
STATIC int octospi_read_cmd_qaddr_qdata(void *self_in, uint8_t cmd, uint32_t addr, size_t len, uint8_t *dest) {
(void)self_in;
#if defined(MICROPY_HW_OSPIFLASH_IO1) && !defined(MICROPY_HW_OSPIFLASH_IO2) && !defined(MICROPY_HW_OSPIFLASH_IO4)
// Use 2-line address, 2-line data.
uint32_t adsize = MICROPY_HW_SPI_ADDR_IS_32BIT(addr) ? 3 : 2;
uint32_t dmode = 2; // data on 2-lines
uint32_t admode = 2; // address on 2-lines
uint32_t dcyc = 4; // 4 dummy cycles
if (cmd == 0xeb || cmd == 0xec) {
// Convert to 2-line command.
cmd = MICROPY_HW_SPI_ADDR_IS_32BIT(addr) ? 0xbc : 0xbb;
}
#else
// Fallback to use 1-line address, 1-line data.
uint32_t adsize = MICROPY_HW_SPI_ADDR_IS_32BIT(addr) ? 3 : 2;
uint32_t dmode = 1; // data on 1-line
uint32_t admode = 1; // address on 1-line
uint32_t dcyc = 0; // 0 dummy cycles
if (cmd == 0xeb) {
if (cmd == 0xeb || cmd == 0xec) {
// Convert to 1-line command.
cmd = MICROPY_HW_SPI_ADDR_IS_32BIT(addr) ? 0x13 : 0x03;
}
#endif
OCTOSPI1->FCR = OCTOSPI_FCR_CTCF; // clear TC flag
OCTOSPI1->DLR = len - 1; // number of bytes to read