docs/esp32: Update esp32 docs based on IDF v5 changes.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2023-06-21 11:55:22 +10:00
parent 717060447f
commit 68e0e889b4
3 changed files with 2 additions and 26 deletions

View File

@ -57,7 +57,6 @@ The :mod:`esp32` module::
import esp32
esp32.hall_sensor() # read the internal hall sensor
esp32.raw_temperature() # read the internal temperature of the MCU, in Fahrenheit
esp32.ULP() # access to the Ultra-Low-Power Co-processor
@ -137,19 +136,11 @@ The keyword arguments for the constructor defining the PHY type and interface ar
or output. Suitable values are Pin.IN and Pin.OUT.
- ref_clk=pin-object # defines the Pin used for ref_clk.
The options ref_clk_mode and ref_clk require at least esp-idf version 4.4. For
earlier esp-idf versions, these parameters must be defined by kconfig board options.
These are working configurations for LAN interfaces of popular boards::
# Olimex ESP32-GATEWAY: power controlled by Pin(5)
# Olimex ESP32 PoE and ESP32-PoE ISO: power controlled by Pin(12)
lan = network.LAN(mdc=machine.Pin(23), mdio=machine.Pin(18), power=machine.Pin(5),
phy_type=network.PHY_LAN8720, phy_addr=0)
# or with dynamic ref_clk pin configuration
lan = network.LAN(mdc=machine.Pin(23), mdio=machine.Pin(18), power=machine.Pin(5),
phy_type=network.PHY_LAN8720, phy_addr=0,
ref_clk=machine.Pin(17), ref_clk_mode=machine.Pin.OUT)
@ -164,16 +155,6 @@ These are working configurations for LAN interfaces of popular boards::
lan = network.LAN(id=0, mdc=Pin(23), mdio=Pin(18), power=Pin(5),
phy_type=network.PHY_IP101, phy_addr=1)
A suitable definition of the PHY interface in a sdkconfig.board file is::
CONFIG_ETH_PHY_INTERFACE_RMII=y
CONFIG_ETH_RMII_CLK_OUTPUT=y
CONFIG_ETH_RMII_CLK_OUT_GPIO=17
CONFIG_LWIP_LOCAL_HOSTNAME="ESP32_POE"
The value assigned to CONFIG_ETH_RMII_CLK_OUT_GPIO may vary depending on the
board's wiring.
Delay and timing
----------------

View File

@ -44,10 +44,6 @@ Functions
Read the raw value of the internal temperature sensor, returning an integer.
.. function:: hall_sensor()
Read the raw value of the internal Hall sensor, returning an integer.
.. function:: idf_heap_info(capabilities)
Returns information about the ESP-IDF heap memory regions. One of them contains

View File

@ -25,9 +25,8 @@ Constructors
Create a WDT object and start it. The timeout must be given in milliseconds.
Once it is running the timeout cannot be changed and the WDT cannot be stopped either.
Notes: On the esp32 the minimum timeout is 1 second. On the esp8266 a timeout
cannot be specified, it is determined by the underlying system. On rp2040 devices,
the maximum timeout is 8388 ms.
Notes: On the esp8266 a timeout cannot be specified, it is determined by the underlying system.
On rp2040 devices, the maximum timeout is 8388 ms.
Methods
-------