stm32/main: Use consistent indenting of macro #if's.

This commit is contained in:
Damien George 2018-05-22 13:17:03 +10:00
parent f68e722005
commit e773a2cdba
1 changed files with 29 additions and 31 deletions

View File

@ -343,12 +343,12 @@ STATIC bool init_sdcard_fs(void) {
#if !MICROPY_HW_USES_BOOTLOADER
STATIC uint update_reset_mode(uint reset_mode) {
#if MICROPY_HW_HAS_SWITCH
#if MICROPY_HW_HAS_SWITCH
if (switch_get()) {
// The original method used on the pyboard is appropriate if you have 2
// or more LEDs.
#if defined(MICROPY_HW_LED2)
#if defined(MICROPY_HW_LED2)
for (uint i = 0; i < 3000; i++) {
if (!switch_get()) {
break;
@ -376,7 +376,7 @@ STATIC uint update_reset_mode(uint reset_mode) {
}
mp_hal_delay_ms(400);
#elif defined(MICROPY_HW_LED1)
#elif defined(MICROPY_HW_LED1)
// For boards with only a single LED, we'll flash that LED the
// appropriate number of times, with a pause between each one
@ -409,11 +409,11 @@ STATIC uint update_reset_mode(uint reset_mode) {
}
mp_hal_delay_ms(400);
}
#else
#error Need a reset mode update method
#endif
#else
#error Need a reset mode update method
#endif
}
#endif
#endif
return reset_mode;
}
#endif
@ -522,13 +522,13 @@ void stm32_main(uint32_t reset_mode) {
soft_reset:
#if defined(MICROPY_HW_LED2)
#if defined(MICROPY_HW_LED2)
led_state(1, 0);
led_state(2, 1);
#else
#else
led_state(1, 1);
led_state(2, 0);
#endif
#endif
led_state(3, 0);
led_state(4, 0);
@ -576,7 +576,7 @@ soft_reset:
// Define MICROPY_HW_UART_REPL to be PYB_UART_6 and define
// MICROPY_HW_UART_REPL_BAUD in your mpconfigboard.h file if you want a
// REPL on a hardware UART as well as on USB VCP
#if defined(MICROPY_HW_UART_REPL)
#if defined(MICROPY_HW_UART_REPL)
{
mp_obj_t args[2] = {
MP_OBJ_NEW_SMALL_INT(MICROPY_HW_UART_REPL),
@ -585,13 +585,13 @@ soft_reset:
MP_STATE_PORT(pyb_stdio_uart) = pyb_uart_type.make_new((mp_obj_t)&pyb_uart_type, MP_ARRAY_SIZE(args), 0, args);
uart_attach_to_repl(MP_STATE_PORT(pyb_stdio_uart), true);
}
#else
#else
MP_STATE_PORT(pyb_stdio_uart) = NULL;
#endif
#endif
#if MICROPY_HW_ENABLE_CAN
#if MICROPY_HW_ENABLE_CAN
can_init0();
#endif
#endif
#if MICROPY_HW_ENABLE_USB
pyb_usb_init0();
@ -602,7 +602,7 @@ soft_reset:
bool mounted_flash = init_flash_fs(reset_mode);
bool mounted_sdcard = false;
#if MICROPY_HW_HAS_SDCARD
#if MICROPY_HW_HAS_SDCARD
// if an SD card is present then mount it on /sd/
if (sdcard_is_present()) {
// if there is a file in the flash called "SKIPSD", then we don't mount the SD card
@ -610,7 +610,7 @@ soft_reset:
mounted_sdcard = init_sdcard_fs();
}
}
#endif
#endif
#if MICROPY_HW_ENABLE_USB
// if the SD card isn't used as the USB MSC medium then use the internal flash
@ -649,12 +649,12 @@ soft_reset:
}
// turn boot-up LEDs off
#if !defined(MICROPY_HW_LED2)
#if !defined(MICROPY_HW_LED2)
// If there is only one LED on the board then it's used to signal boot-up
// and so we turn it off here. Otherwise LED(1) is used to indicate dirty
// flash cache and so we shouldn't change its state.
led_state(1, 0);
#endif
#endif
led_state(2, 0);
led_state(3, 0);
led_state(4, 0);
@ -670,24 +670,22 @@ soft_reset:
}
#endif
#if MICROPY_HW_HAS_MMA7660
#if MICROPY_HW_HAS_MMA7660
// MMA accel: init and reset
accel_init();
#endif
#endif
#if MICROPY_HW_ENABLE_SERVO
// servo
#if MICROPY_HW_ENABLE_SERVO
servo_init();
#endif
#endif
#if MICROPY_HW_ENABLE_DAC
// DAC
#if MICROPY_HW_ENABLE_DAC
dac_init();
#endif
#endif
#if MICROPY_PY_NETWORK
#if MICROPY_PY_NETWORK
mod_network_init();
#endif
#endif
// At this point everything is fully configured and initialised.
@ -738,9 +736,9 @@ soft_reset_exit:
#endif
timer_deinit();
uart_deinit();
#if MICROPY_HW_ENABLE_CAN
#if MICROPY_HW_ENABLE_CAN
can_deinit();
#endif
#endif
machine_deinit();
#if MICROPY_PY_THREAD