drivers,ports: Fix a few typos in comments.

Fixes:
- Should read `definitions` rather than `defintions`.
- Should read `resolution` rather than `resoultion`.
- Should read `inefficient` rather than `inefficent`.
- Should read `closed` rather than `closded`.

Signed-off-by: Tim Gates <tim.gates@iress.com>
This commit is contained in:
Tim Gates 2022-07-17 08:43:33 +10:00 committed by Damien George
parent 924e55aca1
commit f736afb577
4 changed files with 7 additions and 7 deletions

View File

@ -604,7 +604,7 @@ INT32 hci_unsol_event_handler(CHAR *event_hdr)
{
//data[0] represents the socket id, for which FIN was received by remote.
//Upon receiving this event, the user can close the socket, or else the
//socket will be closded after inacvitity timeout (by default 60 seconds)
//socket will be closed after inacvitity timeout (by default 60 seconds)
tSLInformation.sWlanCB(event_type, data, 1);
}
}

View File

@ -18,7 +18,7 @@
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
/* FLEXSPI memory config block related definitions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
@ -26,7 +26,7 @@
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
/* Lookup table related definitions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2

View File

@ -50,7 +50,7 @@
/// val = adc.read_core_vbat() # read MCU VBAT
/// val = adc.read_core_vref() # read MCU VREF
/* ADC defintions */
/* ADC definitions */
#define ADCx (ADC1)
#define PIN_ADC_MASK PIN_ADC1
#define pin_adc_table pin_adc1
@ -171,8 +171,8 @@
#define EOC_TIMEOUT (10)
/* Core temperature sensor definitions */
#define CORE_TEMP_V25 (943) /* (0.76v/3.3v)*(2^ADC resoultion) */
#define CORE_TEMP_AVG_SLOPE (3) /* (2.5mv/3.3v)*(2^ADC resoultion) */
#define CORE_TEMP_V25 (943) /* (0.76v/3.3v)*(2^ADC resolution) */
#define CORE_TEMP_AVG_SLOPE (3) /* (2.5mv/3.3v)*(2^ADC resolution) */
// scale and calibration values for VBAT and VREF
#define ADC_SCALE (ADC_SCALE_V / ((1 << ADC_CAL_BITS) - 1))

View File

@ -181,7 +181,7 @@ void portb_isr(void)
void portc_isr(void)
{
// TODO: these are inefficent. Use CLZ somehow....
// TODO: these are inefficient. Use CLZ somehow....
uint32_t isfr = PORTC_ISFR;
PORTC_ISFR = isfr;
if ((isfr & CORE_PIN9_BITMASK) && intFunc[9]) intFunc[9]();