Commit Graph

14 Commits

Author SHA1 Message Date
Damien George 48b5a7b060 extmod/modmachine: Provide common Python bindings for bootloader().
Signed-off-by: Damien George <damien@micropython.org>
2023-11-30 16:11:11 +11:00
Damien George 90023b4dcf extmod/modmachine: Clean up decls of machine types to use common ones.
The machine_i2c_type, machine_spi_type and machine_timer_type symbols are
already declared in extmod/modmachine.h and should not be declared anywhere
else.

Also move declarations of machine_pin_type and machine_rtc_type to the
common header in extmod.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 16:20:53 +11:00
Damien George 5b4a2baff6 extmod/machine_uart: Factor ports' UART Python bindings to common code.
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings.  For all ports except the two listed
below there is no functional change.

The nrf port has UART.sendbreak() removed, but this method previously did
nothing.

The zephyr port has the following methods added:
- UART.init(): supports setting timeout and timeout_char.
- UART.deinit(): does nothing, just returns None.
- UART.flush(): raises OSError(EINVAL) because it's not implemented.
- UART.any() and UART.txdone(): raise NotImplementedError.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-26 10:46:42 +11:00
Damien George 95d8b5fd55 extmod/machine_adc: Factor ports' ADC Python bindings to common code.
No functional change, just code factoring to have the Python bindings in
one location, and all the ports use those same bindings.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-23 17:16:45 +11:00
Damien George f2f3ef162d extmod/machine_i2s: Factor ports' I2S Python bindings to common code.
This factors the basic top-level I2S class code from the ports into
extmod/machine_i2s.c:
- I2S class definition and method table.
- The init and deinit method wrappers.
- The make_new code.

Further factoring will follow.

Signed-off-by: Damien George <damien@micropython.org>
2023-10-20 17:39:57 +11:00
Damien George 60929ec7e2 extmod/machine_wdt: Factor ports' WDT Python bindings to common code.
There are currently 7 ports that implement machine.WDT and a lot of code is
duplicated across these implementations.  This commit factors the common
parts of all these implementations to a single location in
extmod/machine_wdt.c.  This common code provides the top-level Python
bindings (class and method wrappers), and then each port implements the
back end specific to that port.

With this refactor the ports remain functionally the same except for:

- The esp8266 WDT constructor now takes keyword arguments, and accepts the
  "timeout" argument but raises an exception if it's not the default value
  (this port doesn't support changing the timeout).

- The mimxrt and samd ports now interpret the argument to WDT.timeout_ms()
  as signed and if it's negative truncate it to the minimum timeout (rather
  than it being unsigned and a negative value truncating to the maximum
  timeout).

Signed-off-by: Damien George <damien@micropython.org>
2023-10-20 15:36:09 +11:00
robert-hh 84302b2854 rp2/machine_pwm: Enable keyword args in constructor and add init method.
This adds support for freq/duty_u16/duty_ns keyword arguments in the PWM
constructor, and adds the PWM.init() method.  Using init() without
arguments enables a previously deinit-ed PWM again.

Further changes in this commit:
- Do not start PWM output if only duty was set.
- Stop all PWM slices on soft-reset.
- Fix a bug when changing the freq on a channel pair with duty_ns set.
2023-05-04 13:13:05 +10:00
iabdalkader 22ad45fda6 rp2: Rename machine I2C type consistently across ports.
This renames:
- machine_hw_i2c_type -> machine_i2c_type
2022-10-22 12:56:58 +11:00
iabdalkader f522aabab2 rp2/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:38:21 +10:00
Andrew Leech bca816f5ac rp2: Add support for using Wiznet hardware as an Ethernet NIC.
Uses the extmod/network_wiznet5k driver to provide network connectivity.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Mike Teachman b6dbbbe82f rp2/machine_i2s: Add I2S protocol support.
This commit adds I2S protocol support for the rp2 port:
- I2S API is consistent with STM32 and ESP32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- DMA IRQs are managed on an I2S object basis, allowing other
  RP2 entities to use DMA IRQs when I2S is not being used
- MicroPython documentation
- tested on Raspberry Pi Pico development board
- build metric changes for this commit: text(+4552), data(0), bss(+8)

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:27:42 +11:00
Damien George af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Krzysztof Adamski 37d01d4be3 rp2/machine_rtc: Add initial support for RTC.
Initial support for machine.RTC on rp2 port. It only supports datetime()
method and nothing else. The method gets/returns a tuple of 8 items, just
like esp32 port, for example, but the usec parameter is ignored as the RP2
RTC only works up to seconds precision.

The Pico RTC isn't very useful as the time is lost during reset and there
seems to be no way to easily power up just the RTC clock with a low current
voltage, but still there seems to be use-cases for that, see issues #6831,
and a Thonny issue #1592. It was also requested for inclusion on v1.15
roadmap on #6832.

Signed-off-by: Krzysztof Adamski <k@japko.eu>
2021-06-12 23:02:54 +10:00
Damien George 469345e728 rp2: Add new port to Raspberry Pi RP2 microcontroller.
This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040
microcontroller.

The build system uses pure cmake (with a small Makefile wrapper for
convenience).  The USB driver is TinyUSB, and there is a machine module
with most of the standard classes implemented.  Some examples are provided
in the examples/rp2/ directory.

Work done in collaboration with Graham Sanderson.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-30 00:42:29 +11:00