/***************************************************************************** * * nvmem.c - CC3000 Host Driver Implementation. * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ //***************************************************************************** // //! \addtogroup nvmem_api //! @{ // //***************************************************************************** #include #include "nvmem.h" #include "hci.h" #include "socket.h" #include "evnt_handler.h" //***************************************************************************** // // Prototypes for the structures for APIs. // //***************************************************************************** #define NVMEM_READ_PARAMS_LEN (12) #define NVMEM_CREATE_PARAMS_LEN (8) #define NVMEM_WRITE_PARAMS_LEN (16) //***************************************************************************** // //! nvmem_read //! //! @param ulFileId nvmem file id:\n //! NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID, //! NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID, //! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, //! NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID, //! NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID, //! NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID, //! and user files 12-15. //! @param ulLength number of bytes to read //! @param ulOffset ulOffset in file from where to read //! @param buff output buffer pointer //! //! @return on success 0, error otherwise. //! //! @brief Reads data from the file referred by the ulFileId parameter. //! Reads data from file ulOffset till length. Err if the file can't //! be used, is invalid, or if the read is out of bounds. //! //***************************************************************************** INT32 nvmem_read(UINT32 ulFileId, UINT32 ulLength, UINT32 ulOffset, UINT8 *buff) { UINT8 ucStatus = 0xFF; UINT8 *ptr; UINT8 *args; ptr = tSLInformation.pucTxCommandBuffer; args = (ptr + HEADERS_SIZE_CMD); // Fill in HCI packet structure args = UINT32_TO_STREAM(args, ulFileId); args = UINT32_TO_STREAM(args, ulLength); args = UINT32_TO_STREAM(args, ulOffset); // Initiate a HCI command hci_command_send(HCI_CMND_NVMEM_READ, ptr, NVMEM_READ_PARAMS_LEN); SimpleLinkWaitEvent(HCI_CMND_NVMEM_READ, &ucStatus); // In case there is data - read it - even if an error code is returned // Note: It is the user responsibility to ignore the data in case of an error code // Wait for the data in a synchronous way. Here we assume that the buffer is // big enough to store also parameters of nvmem SimpleLinkWaitData(buff, 0, 0); return(ucStatus); } //***************************************************************************** // //! nvmem_write //! //! @param ulFileId nvmem file id:\n //! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, //! NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID, //! and user files 12-15. //! @param ulLength number of bytes to write //! @param ulEntryOffset offset in file to start write operation from //! @param buff data to write //! //! @return on success 0, error otherwise. //! //! @brief Write data to nvmem. //! writes data to file referred by the ulFileId parameter. //! Writes data to file ulOffset till ulLength.The file id will be //! marked invalid till the write is done. The file entry doesn't //! need to be valid - only allocated. //! //***************************************************************************** INT32 nvmem_write(UINT32 ulFileId, UINT32 ulLength, UINT32 ulEntryOffset, UINT8 *buff) { INT32 iRes; UINT8 *ptr; UINT8 *args; iRes = EFAIL; ptr = tSLInformation.pucTxCommandBuffer; args = (ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE); // Fill in HCI packet structure args = UINT32_TO_STREAM(args, ulFileId); args = UINT32_TO_STREAM(args, 12); args = UINT32_TO_STREAM(args, ulLength); args = UINT32_TO_STREAM(args, ulEntryOffset); memcpy((ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE + NVMEM_WRITE_PARAMS_LEN),buff,ulLength); // Initiate a HCI command but it will come on data channel hci_data_command_send(HCI_CMND_NVMEM_WRITE, ptr, NVMEM_WRITE_PARAMS_LEN, ulLength); SimpleLinkWaitEvent(HCI_EVNT_NVMEM_WRITE, &iRes); return(iRes); } //***************************************************************************** // //! nvmem_set_mac_address //! //! @param mac mac address to be set //! //! @return on success 0, error otherwise. //! //! @brief Write MAC address to EEPROM. //! mac address as appears over the air (OUI first) //! //***************************************************************************** UINT8 nvmem_set_mac_address(UINT8 *mac) { return nvmem_write(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac); } //***************************************************************************** // //! nvmem_get_mac_address //! //! @param[out] mac mac address //! //! @return on success 0, error otherwise. //! //! @brief Read MAC address from EEPROM. //! mac address as appears over the air (OUI first) //! //***************************************************************************** UINT8 nvmem_get_mac_address(UINT8 *mac) { return nvmem_read(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac); } //***************************************************************************** // //! nvmem_write_patch //! //! @param ulFileId nvmem file id:\n //! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, //! @param spLength number of bytes to write //! @param spData SP data to write //! //! @return on success 0, error otherwise. //! //! @brief program a patch to a specific file ID. //! The SP data is assumed to be organized in 2-dimensional. //! Each line is SP_PORTION_SIZE bytes long. Actual programming is //! applied in SP_PORTION_SIZE bytes portions. //! //***************************************************************************** UINT8 nvmem_write_patch(UINT32 ulFileId, UINT32 spLength, const UINT8 *spData) { UINT8 status = 0; UINT16 offset = 0; UINT8* spDataPtr = (UINT8*)spData; while ((status == 0) && (spLength >= SP_PORTION_SIZE)) { status = nvmem_write(ulFileId, SP_PORTION_SIZE, offset, spDataPtr); offset += SP_PORTION_SIZE; spLength -= SP_PORTION_SIZE; spDataPtr += SP_PORTION_SIZE; } if (status !=0) { // NVMEM error occurred return status; } if (spLength != 0) { // if reached here, a reminder is left status = nvmem_write(ulFileId, spLength, offset, spDataPtr); } return status; } //***************************************************************************** // //! nvmem_read_sp_version //! //! @param[out] patchVer first number indicates package ID and the second //! number indicates package build number //! //! @return on success 0, error otherwise. //! //! @brief Read patch version. read package version (WiFi FW patch, //! driver-supplicant-NS patch, bootloader patch) //! //***************************************************************************** #ifndef CC3000_TINY_DRIVER UINT8 nvmem_read_sp_version(UINT8* patchVer) { UINT8 *ptr; // 1st byte is the status and the rest is the SP version UINT8 retBuf[5]; ptr = tSLInformation.pucTxCommandBuffer; // Initiate a HCI command, no args are required hci_command_send(HCI_CMND_READ_SP_VERSION, ptr, 0); SimpleLinkWaitEvent(HCI_CMND_READ_SP_VERSION, retBuf); // package ID *patchVer = retBuf[3]; // package build number *(patchVer+1) = retBuf[4]; return(retBuf[0]); } #endif //***************************************************************************** // //! nvmem_create_entry //! //! @param ulFileId nvmem file Id:\n //! * NVMEM_AES128_KEY_FILEID: 12 //! * NVMEM_SHARED_MEM_FILEID: 13 //! * and fileIDs 14 and 15 //! @param ulNewLen entry ulLength //! //! @return on success 0, error otherwise. //! //! @brief Create new file entry and allocate space on the NVMEM. //! Applies only to user files. //! Modify the size of file. //! If the entry is unallocated - allocate it to size //! ulNewLen (marked invalid). //! If it is allocated then deallocate it first. //! To just mark the file as invalid without resizing - //! set ulNewLen=0. //! //***************************************************************************** INT32 nvmem_create_entry(UINT32 ulFileId, UINT32 ulNewLen) { UINT8 *ptr; UINT8 *args; UINT8 retval; ptr = tSLInformation.pucTxCommandBuffer; args = (ptr + HEADERS_SIZE_CMD); // Fill in HCI packet structure args = UINT32_TO_STREAM(args, ulFileId); args = UINT32_TO_STREAM(args, ulNewLen); // Initiate a HCI command hci_command_send(HCI_CMND_NVMEM_CREATE_ENTRY,ptr, NVMEM_CREATE_PARAMS_LEN); SimpleLinkWaitEvent(HCI_CMND_NVMEM_CREATE_ENTRY, &retval); return(retval); } //***************************************************************************** // // Close the Doxygen group. //! @} // //*****************************************************************************