diff --git a/asm/fx@3.10/kbd-config.txt b/asm/fx@3.10/kbd-config.txt new file mode 100644 index 0000000..7bf896a --- /dev/null +++ b/asm/fx@3.10/kbd-config.txt @@ -0,0 +1,256 @@ +<80053a98 Keyboard_DisableInterrupt> + Disable and mask the keyboard interrupt. + + # Block IMR5 & 0x80 + # Set IPRF & 0xf000 to 0 + 80053a98: a008 bra <80053aac> + 80053a9a: 0009 nop + ... + 80053aac: d478 mov.l 0xa4080094 INTC.IMR5, r4 + 80053aae: e180 mov #-128, r1 + 80053ab0: 955b mov.w 0x00000fff, r5 + 80053ab2: 2410 mov.b r1, @r4 + 80053ab4: 7480 add #-128, r4 + 80053ab6: 6241 mov.w @r4, r2 + 80053ab8: 2259 and r5, r2 + 80053aba: 000b rts + 80053abc: 2421 mov.w r2, @r4 + +<80053aa0 Keyboard_EnableInterrupt> + Enable and unmask the keyboard interrupt. + + # Set IPRF & 0xf000 to 13 + # Clear IMR5 & 0x80 + 80053aa0: a00d bra <80053abe> + 80053aa2: 0009 nop + ... + 80053abe: d475 mov.l 0xa4080014 INTC.IPRF, r4 + 80053ac0: 9753 mov.w 0x00000fff, r7 + 80053ac2: 9253 mov.w 0xffffd000, r2 + 80053ac4: e580 mov #-128, r5 + 80053ac6: 6141 mov.w @r4, r1 + 80053ac8: 2179 and r7, r1 + 80053aca: 212b or r2, r1 + 80053acc: 2411 mov.w r1, @r4 + 80053ace: d472 mov.l 0xa40800d4 INTC.IMCR5, r4 + 80053ad0: 000b rts + 80053ad2: 2450 mov.b r5, @r4 + +--- + +<800540f6 CMT_InterruptiveSleep> + Performs a sleep using the CMT. If the CMT was previously running, it is + interrupted for the duration of the sleep then restored. + + r4: Waiting delay, in RCLK ticks (TODO: Frequency of RCLK) + r0: Always returns 1. + + Stack> || r10 r11 r12 r13 r14 macl (*MSTPCR0) (r4) + + # Store bit 0x4000 of MSTPCR0 (CMT power bit) to r6, then clear it. + # r1,r4,r11 will be a backup of the CMT state, initialize them to 0. + 800540f6: 2fa6 mov.l r10, @-r15 + 800540f8: 2fb6 mov.l r11, @-r15 + 800540fa: 2fc6 mov.l r12, @-r15 + 800540fc: 2fd6 mov.l r13, @-r15 + 800540fe: 2fe6 mov.l r14, @-r15 + 80054100: 4f12 sts.l macl, @-r15 + 80054102: 7ff8 add #-8, r15 + 80054104: da2e mov.l 0xa4150030 POWER.MSTPCR0, r10 + 80054106: e340 mov #64, r3 + 80054108: eb00 mov #0, r11 + 8005410a: 4318 shll8 r3 + 8005410c: 2f42 mov.l r4, @r15 + 8005410e: 64b3 mov r11, r4 + 80054110: 61b3 mov r11, r1 + 80054112: de32 mov.l 0xa44a0060 CMT.CMCSR, r14 + 80054114: 67a2 mov.l @r10, r7 + 80054116: 1f71 mov.l r7, @(4,r15) + 80054118: 2738 tst r3, r7 + 8005411a: 0029 movt r0 + 8005411c: dc30 mov.l 0xa44a0000 CMT.CMSTR, r12 + 8005411e: ca01 xor #1, r0 + 80054120: 62a2 mov.l @r10, r2 + 80054122: 954a mov.w 0xffffbfff, r5 + 80054124: 6603 mov r0, r6 + 80054126: 2259 and r5, r2 + 80054128: 2a22 mov.l r2, @r10 + + # If the CMT is running (bit #32 of CMSTR), stop it and save CMCSR, CMCOR and + # CMCNT to r11, r4 and r1. + 8005412a: 60c1 mov.w @r12, r0 + 8005412c: c820 tst #32, r0 + 8005412e: 8d06 bt.s <8005413e> + 80054130: 6db3 mov r11, r13 + 80054132: e700 mov #0, r7 + 80054134: 2c71 mov.w r7, @r12 + 80054136: 6be1 mov.w @r14, r11 + 80054138: ed01 mov #1, r13 + 8005413a: 54e2 mov.l @(8,r14), r4 + 8005413c: 51e1 mov.l @(4,r14), r1 + + # Stop the CMT. Wait for the CMCNT write flag to go down then set CMCSR=5. + # CMS=0 -> 32-bit counter + # CMM=0 -> One-shot mode + # CMR=0 -> No interrupt + # CKS=5 -> Counting at RCLK/32 + 8005413e: e720 mov #32, r7 + 80054140: e200 mov #0, r2 + 80054142: 2c21 mov.w r2, @r12 + 80054144: 4718 shll8 r7 + 80054146: 62e1 mov.w @r14, r2 + 80054148: 2278 tst r7, r2 + 8005414a: 8bfc bf <80054146> + 8005414c: e505 mov #5, r5 + 8005414e: 2e51 mov.w r5, @r14 + + # Set CMCNT=0 and CMCOR=(1475*r4)/32, then start the CMT. + 80054150: 65f2 mov.l @r15, r5 + 80054152: 9233 mov.w 0x000005c3, r2 + 80054154: e300 mov #0, r3 + 80054156: 1e31 mov.l r3, @(4,r14) + 80054158: 0257 mul.l r5, r2 + 8005415a: 021a sts macl, r2 + 8005415c: e3fb mov #-5, r3 + 8005415e: d521 mov.l 0x00008000, r5 + 80054160: 423d shld r3, r2 + 80054162: 1e22 mov.l r2, @(8,r14) + 80054164: 60c1 mov.w @r12, r0 + 80054166: cb20 or #32, r0 + 80054168: 2c01 mov.w r0, @r12 + + # Actively wait for the match flag to raise. + 8005416a: 62e1 mov.w @r14, r2 + 8005416c: 622d extu.w r2, r2 + 8005416e: 2258 tst r5, r2 + 80054170: 89fb bt <8005416a> + + # Stop the CMT. If it was running at the start of the function, wait again for + # the CMCNT write flag then restore CMCNT, CMCOR, CMCSR, and restart it. + 80054172: 2dd8 tst r13, r13 + 80054174: e200 mov #0, r2 + 80054176: 8d0b bt.s <80054190> + 80054178: 2c21 mov.w r2, @r12 + 8005417a: 62e1 mov.w @r14, r2 + 8005417c: 2278 tst r7, r2 + 8005417e: 8bfc bf <8005417a> + 80054180: 951d mov.w 0xffffdfff, r5 + 80054182: 1e11 mov.l r1, @(4,r14) + 80054184: 1e42 mov.l r4, @(8,r14) + 80054186: 2b59 and r5, r11 + 80054188: 2eb1 mov.w r11, @r14 + 8005418a: 60c1 mov.w @r12, r0 + 8005418c: cb20 or #32, r0 + 8005418e: 2c01 mov.w r0, @r12 + + # If the CMT was not powered in MSTPCR0 initially, turn it back off. + 80054190: 2668 tst r6, r6 + 80054192: 8904 bt <8005419e> + 80054194: 62a2 mov.l @r10, r2 + 80054196: e140 mov #64, r1 + 80054198: 4118 shll8 r1 + 8005419a: 221b or r1, r2 + 8005419c: 2a22 mov.l r2, @r10 + + # Restore the stack and return 1. + 8005419e: e001 mov #1, r0 + 800541a0: 7f08 add #8, r15 + 800541a2: 4f16 lds.l @r15+, macl + 800541a4: 6ef6 mov.l @r15+, r14 + 800541a6: 6df6 mov.l @r15+, r13 + 800541a8: 6cf6 mov.l @r15+, r12 + 800541aa: 6bf6 mov.l @r15+, r11 + 800541ac: 000b rts + 800541ae: 6af6 mov.l @r15+, r10 + +<800541b0 CMT_InterruptiveSleep> + 800541b0: afa1 bra <800540f6> + 800541b2: 0009 nop + +--- + +<80055d36 Keyboard_ConfigurePorts> + Configures keyboard for low-level (and probably KEYSC) access. This has not + been fully documented to the best of my knowledge. + + TODO: Investigate the low-level abstraction of the KEYSC + See also: http://www.casiopeia.net/forum/viewtopic.php?p=14193#p14193 + + # PFC.PMCR = 0x0000 + # PFC.PNCR = 0x0100 + # PFC.PPCR = 0x0000 (also called PZCR sometimes) + 80055d36: d244 mov.l 0xa4050116 PFC.PMCR, r2 + 80055d38: e600 mov #0, r6 + 80055d3a: e001 mov #1, r0 + 80055d3c: 4018 shll8 r0 + 80055d3e: 2261 mov.w r6, @r2 + 80055d40: 8121 mov.w r0, @(2,r2) + 80055d42: 7236 add #54, r2 + 80055d44: 000b rts + 80055d46: 2261 mov.w r6, @r2 + +<80055d48> + + # Stop the keyboard interrupt configuring and set the port parameters + 80055d48: 4f22 sts.l pr, @-r15 + 80055d4a: d138 mov.l 0x80053a98 Keyboard_DisableInterrupt, r1 + 80055d4c: 410b jsr @r1 + 80055d4e: 0009 nop + 80055d50: bff1 bsr <80055d36 Keyboard_ConfigurePorts> + 80055d52: e401 mov #1, r4 + + # Initialize the KEYSC configuration + # UCNTREG = 0x8000 + # UINTREG = 0x00ff + # UINTREG = 0x4800 + # AUTOFIXREG = 0x8042 + # UINTERVALREG = 0x0098 + # UWSETREG = 0x0000 + # PFC.PULCRP = 0xff + # OUTPINSET = 0x0fff + # INPINSET = 0x00ff + # UMODEREG = 0x0200 + # <800541b0>(1) + 80055d54: d53d mov.l 0xa44b000c KEYSC.UCNTREG, r5 + 80055d56: e2ff mov #-1, r2 + 80055d58: 622c extu.b r2, r2 + 80055d5a: 9433 mov.w 0xffff8000, r4 + 80055d5c: d738 mov.l 0xa40501c6 PFC.PULCRP, r7 + 80055d5e: e1ff mov #-1, r1 + 80055d60: 6023 mov r2, r0 + 80055d62: 2541 mov.w r4, @r5 + 80055d64: e401 mov #1, r4 + 80055d66: 8154 mov.w r0, @(8,r5) + 80055d68: e048 mov #72, r0 + 80055d6a: 4018 shll8 r0 + 80055d6c: 8154 mov.w r0, @(8,r5) + 80055d6e: 902a mov.w 0xffff8042, r0 + 80055d70: 8151 mov.w r0, @(2,r5) + 80055d72: e098 mov #-104, r0 + 80055d74: 600c extu.b r0, r0 + 80055d76: 8156 mov.w r0, @(12,r5) + 80055d78: e000 mov #0, r0 + 80055d7a: 8155 mov.w r0, @(10,r5) + 80055d7c: 2710 mov.b r1, @r7 + 80055d7e: 901f mov.w 0x00000fff, r0 + 80055d80: 8157 mov.w r0, @(14,r5) + 80055d82: 6023 mov r2, r0 + 80055d84: d132 mov.l 0x800541b0, r1 + 80055d86: 8158 mov.w r0, @(16,r5) + 80055d88: e002 mov #2, r0 + 80055d8a: 4018 shll8 r0 + 80055d8c: 410b jsr @r1 + 80055d8e: 8152 mov.w r0, @(4,r5) + + # Restore the keyboard interrupt (setting IPRF & 0xf000 to 13 is useless here + # because it's overwritten immediately) and return + 80055d90: d628 mov.l 0xa4080014 INTC.IPRF, r6 + 80055d92: 9115 mov.w 0x00000fff, r1 + 80055d94: 9515 mov.w 0xffffd000, r5 + 80055d96: d228 mov.l 0x80053aa0 Keyboard_EnableInterrupt, r2 + 80055d98: 6761 mov.w @r6, r7 + 80055d9a: 2719 and r1, r7 + 80055d9c: 275b or r5, r7 + 80055d9e: 2671 mov.w r7, @r6 + 80055da0: 422b jmp @r2 + 80055da2: 4f26 lds.l @r15+, pr diff --git a/symbols/fx@3.10/kbd-config.txt b/symbols/fx@3.10/kbd-config.txt new file mode 100644 index 0000000..d56d108 --- /dev/null +++ b/symbols/fx@3.10/kbd-config.txt @@ -0,0 +1,8 @@ +name: Keyboard_Config +type: symbols +target: fx@3.10 +--- + +80053a98 Keyboard_DisableInterrupt +80053aa0 Keyboard_EnableInterrupt +80055d36 Keyboard_ConfigurePorts