This new mechanism allows an add-in to be restarted after exiting by
just never exiting in the first place, calling gint_osmenu() instead.
This makes sure that we can relaunch the add-in immediately, which is
normally possible through an option in the OS though no OS-independent
method of setting it is currently known.
Because this is gint_osmenu(), known pitfalls apply. On all platforms,
it is necessary to prepare the first frame before leaving. On fx-CG 50,
the inevitable display border is also there.
Since both platforms now have their VBR and gint-specific data loaded
along the add-in's data, the .gint.data section is entirely unused.
The .gint.bss section is still used for uninitialized objects (it has
different semantics than .bss which is initially cleared) and the
.gint.data.sh3 and .gint.bss.sh3 sections that are dropped on the
SH4-only fx-CG 50 are also still used.
* Removed .pretext sections since the TLB is now entirely dynamic; left
only .text.entry for the start symbol.
* Reworked the main files of src/core to move the INTC to its own driver
and let the kernel handle only VBR space and CPU (now: VBR & CPUOPM).
* Moved src/core/gint.c to src/core/kernel.c and centralized all driver
loops that save or restore context for more robustness. This leaves
the callbacks of cpu_setVBR() (formerly gint_setvbr()) pretty short.
* Coalesced gint_switch_out() and gint_switch_in() into a single
function callback for cpu_setVBR().
* Added an abstraction of interrupt signals as an enumerated value so
that drivers no longer hardcode the IPR and IMR numbers and bits,
sometimes even with isSH3() due to differences in the SH7705.
* Changed the interrupt blocking method in cpu_setVBR() from SR.BL=1 to
SR.IMASK=15 so that TLB misses are still handled. This removes the
need for callback functions to be GMAPPED.
* Moved gint_osmenu() and its utilities to a new file src/core/osmenu.c.
This change ports the TLB management system to fx9860g through %003.
This raises the size limit for add-ins to about 500k.
Because SH3 fx9860g does not have ILRAM, the GMAPPED attribute has been
made to generate content to a .gint.mapped section which is sent to the
P1 RAM section historically dubbed "real ram" in which gint's data and
VBR are installed. (Now that I think about it, gint's data should try to
go to normal RAM instead to reduce pressure on this invasion.)
Return-to-menu was also fixed on both platforms by narrowing down the
need for code to remain mapped to the chance of running it with
interrupts disabled. The natural distribution of GMAPPED under this
criterion showed that _gint_setvbr had been left under TLB control;
moving it to the proper RAM area fixed gint switches.
Finally, an omission in the bound checks for mappable TEA addresses (TEA
>= 0x00300000) prevented the appearance of a non-interactible System
ERROR popup when some unmapped addresses are accessed.
This version still does not enable interrupts in timer callbacks,
exposing any application to a crash if a timer underflows while its
callback is not mapped. It is not suitable for any stable application!
This change adds a TLB miss handler that calls __TLB_LoadPTEH() and
removes the startu mapping of add-in pages in the explore() routine of
src/core/start.c.
Note that calling __TLB_LoadPTEH() manually might unexpectedly lead to a
TLB multihit problem as the requested page might be accidentally loaded
by a TLB miss in the code that loads it. A TLB multihit is a platform
reset, so this function should always be considered unsafe to call
(unless the calling code is in a combination of P1 space and ILRAM).
This change also moves a lot of functions out of the .pretext section,
notably topti, as this was designed to allow panic messages when the
add-in couldn't be mapped entirely. By contrast, a GMAPPED macro has
been defined to mark crucial kernel code and data that must remain
mapped at all times. This currently puts the data in ILRAM because
static RAM is not executable. An alternative will have to be found for
SH3-based fx9860g machines.
This version still does not allow TLB misses in timer callbacks and
breaks return-to-menu in a severe way! It is not suitable for any
stable application!
This change modifies the fx-CG 50 linker script to allow add-ins up to
2M and no longer complains about add-ins that don't fit in the TLB.
It also exposes the __TLB_LoadPTEH() syscall (%003 on fx9860g, %00c on
fxcg50) that answers TLB misses. This syscall can be called manually
from an add-in to load some pages and seems to work without problem.
However, this version does not provide any automatic TLB management,
some key areas of the kernel are still under TLB and some user code
(such as timer callbacks) is not! This version is suitable only for
add-ins smaller than 220k!
This commit improves the stability of gint_switch() in two ways:
1. Wait for hardware availability every time driver contexts are saved
or reloaded; this solves crashes due to DMA use when gint takes
control after a BFile call, since BFile_Create() (and possibly
BFile_Write()) leave the DMA running after returning.
2. Remap the add-in after a switch, as apparently calling BFile
functions causes some pages to be evicted. This is more noticeable on
fxcg50 when the size of add-ins nears 220k.
Additionally, dma_transfer_wait() has been updated to not sleep() unless
it is certain that the conditions for wakeup are fulfilled, as this
would sometimes freeze.
The unload() function is not very relevant for drivers because hardware
state is managed by ctx_save() and ctx_restore() and software state is
managed by underlying drivers when there are dependencies.
For now, it's been replaced with a wait() function that allows drivers
to not be interrupted at any point. It is currently used by the DMA to
wait for ongoing transfers to finish before disabling interrupts (which
would prevent the transfer end from being detected) and switching in and
out of gint.
* Add the gint_switch() function which executes user-provided code from
the system (CASIOWIN) context.
* Added interrupt masks to the core context (should have been there long
ago).
* Added the gint_osmenu() function that switches out of gint to invoke
GetKeyWait() and inject KEY_CTRL_MENU to trigger the main menu. This
uses many CASIOWIN syscalls, but we don't care because gint is unloaded.
Trickery is used to catch the key following the return in the add-in
and/or display a new application frame before GetKeyWait() even finishes
after coming back. This is only available on fx9860g for now.
* Removed any public syscall definition to clear up interfaces.
* Patched the DMA interruption problem in a weird way on fxcg50, a
driver function will be used to do that properly eventually.
* Changed the driver model to save driver contexts in preallocated
spaces instead of on the stack for overall less risk.
* Enabled return-to-menu with the MENU key on fx9860g in getkey().
* Changed the keyboard driver to emit releases before presses, as a
return-to-menu acts as a press+release of different keys in a single
driver frame, which confuses getkey().
* Fixed a really stupid bug in memcpy() that made the function really
not work.
Improvements in the timer driver:
* Expose ETMU modules as SH7705_TMU and SH7305_TMU in <gint/mpu/tmu.h>.
* Remove the timer_t structures, using SH*_ETMU and SH*_TMU instead.
Only interrupt gate entries are left hardcoded.
* Discovered that not only every write to the TCNT or TCR of an ETMU
takes about 1/32k of a second (hinting at registers being powered by
the same clock as the timer), but every write occuring while a previous
write is pending is *lost*. This led to terrible bugs when switching
ETMU contexts too fast in gint_switch().
* Removed an internal timer_address() function.
* Overall simplified the handling of timers and the initialization step.
t6k11: use the gint array for variant detection
r61524: use true triple buffering by default
display: define DWIDTH and DHEIGHT
display: add C_RGB(r,g,b) (0 ≤ r,g,b ≤ 31) [fxcg50]
This change adds support for three sections .ilram, .xram and .yram,
along with three macros GILRAM, GXRAM and GYRAM, that can be used to
statically load data to on-chip memory.
This change introduces two new mechanismes for executing user code when
an exception occurs.
* This first is the custom panic message, which usually displays "System
ERROR". The function that performs this task can now be user-defined.
It is also run in user mode because the exception handler rte's into
it, allowing it to execute any kind of interrupt-inducing task. The
behavior is undefined if this function raises an exception.
* The second is an exception-catching function, which (when set) is
called every time an exception occurs, and is granted the chance of
handling the exception to continue execution normally. It can be used
in various ways, the most primitive of which is recording the
exception and going back. It runs in interrupt mode and must not raise
any kind of exception.
This change introduces exception handlers that default to a fatal error
with an on-screen description of the exception and some debugging
information.
It also adds the dprint() function as a definitely-needed helper and
removes bootlog_unmapped() by using the exception handler for the fatal
error display. (Also printf() is now required in all gint add-ins; this
is sad, but space is not as much of a constraint as debugging.)
Finally, the exception handler is used to handle an interrupt which is
an exception in practice, the DMA address error. On fx-CG 50, additional
DMA-related information is displayed on the screen. This is left out on
fx-9860G as there is not enough space.
* Now uses topti instead of fxlib for text (including MMU failure)
* Fit .pretext into 4k for everything before MMU succeeds
* A short version of sprintf() for dynamic messages
* Support a driver function, status(), to allow early driver debug
* Expose more useful platform information in <gint/mpu.h>
* Expose the first of a few CASIOWIN syscalls
Lephe
lephe