PlaneteCasio
/
libc
1
0
Fork 0
Code Issues 6 Pull Requests Releases Wiki Activity

2005-12-14 Paolo Bonzini <bonzini@gnu.org> 

* configure.in: Flip the top-level bootstrap switch.
	* configure: Regenerate.

	Merge from gcc:

	2005-12-14  Daniel Jacobowitz  <dan@codesourcery.com>

        * Makefile.tpl: Throughout the file, use : $(MAKE) along with
        $(stage) and $(unstage).
        (EXTRA_TARGET_FLAGS): Correct double-quoting.
        (all): Remove stray semicolon.
        (local-distclean): Don't handle multilib.tmp and multilib.out.
        (install.all): Set $s for consistency.
        (configure-[+prefix+][+module+]): Instead of [+deps+], handle
        check_multilibs setting.  Always make the install directory.
        (configure-stage[+id+]-[+prefix+][+module+]): Likewise.
        Correct @if/@endif.
        (all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif.
        ($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove.
        (stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR).
        (multilib.out): Remove.
        * Makefile.in: Regenerated.
This commit is contained in:
Paolo Bonzini 2005-12-14 18:00:22 +00:00
parent ba31e832be
commit 15b527ca89
5 changed files with 2353 additions and 1980 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
ChangeLog
View File

@ -1,3 +1,38 @@
2005-12-14 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Flip the top-level bootstrap switch.
* configure: Regenerate.
Merge from gcc:
2005-12-14 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.tpl: Throughout the file, use : $(MAKE) along with
$(stage) and $(unstage).
(EXTRA_TARGET_FLAGS): Correct double-quoting.
(all): Remove stray semicolon.
(local-distclean): Don't handle multilib.tmp and multilib.out.
(install.all): Set $s for consistency.
(configure-[+prefix+][+module+]): Instead of [+deps+], handle
check_multilibs setting. Always make the install directory.
(configure-stage[+id+]-[+prefix+][+module+]): Likewise.
Correct @if/@endif.
(all-stage[+id+]-[+prefix+][+module+]): Correct @if/@endif.
($(TARGET_SUBDIR)/[+module+]/multilib.out): Remove.
(stage[+id+]-start, stage[+id+]-end): Stage $(TARGET_SUBDIR).
(multilib.out): Remove.
* Makefile.in: Regenerated.
2005-12-12 Nathan Sidwell <nathan@codesourcery.com>
* config.sub: Replace ms1 arch with mt. Allow ms1 as alias.
* configure.in: Replace ms1 arch with mt.
* configure: Rebuilt.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-12 Nathan Sidwell <nathan@codesourcery.com>
* config.sub: Replace ms1 arch with mt. Allow ms1 as alias.

3946
Makefile.in
View File

File diff suppressed because it is too large Load Diff

186
Makefile.tpl
View File

@ -425,21 +425,22 @@ X11_FLAGS_TO_PASS = \
'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
# The double $ decreases the length of the command line; those variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. The
# COMPILER_ prefixed variables are not passed down so we expand them here.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(COMPILER_AS_FOR_TARGET)' \
'AS=$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'LD=$$(COMPILER_LD_FOR_TARGET)' \
'LD=$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(COMPILER_NM_FOR_TARGET)' \
'NM=$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
@ -486,9 +487,9 @@ all:
[ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble
@endif gcc-bootstrap
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f stage_last ]; then \
@ -496,7 +497,7 @@ all:
else \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \
fi
@$(stage)
@: $(MAKE); $(stage)
.PHONY: all-build
all-build: [+
@ -521,12 +522,12 @@ all-target: [+
[+ FOR recursive_targets +]
.PHONY: do-[+make_target+]
do-[+make_target+]:
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) [+make_target+]-host \
[+make_target+]-target
@$(stage)
@: $(MAKE); $(stage)
.PHONY: [+make_target+]-host
@ -567,7 +568,7 @@ local-clean:
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
-rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp
-rm -f maybedep.tmp serdep.tmp
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
@ -616,11 +617,11 @@ check-target: [+
ENDFOR target_modules +]
do-check:
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
@$(stage)
@: $(MAKE); $(stage)
# Automated reporting of test results.
@ -647,11 +648,11 @@ mail-report-with-warnings.log: warning.log
.PHONY: install uninstall
install:
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
@$(stage)
@: $(MAKE); $(stage)
.PHONY: install-host-nogcc
install-host-nogcc: [+
@ -678,6 +679,7 @@ uninstall:
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD_COMMAND}` ; export r ; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
(cd ./gcc && \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
@ -730,10 +732,26 @@ TAGS: do-TAGS
maybe-configure-[+prefix+][+module+]:
@if [+prefix+][+module+]
maybe-configure-[+prefix+][+module+]: configure-[+prefix+][+module+]
configure-[+prefix+][+module+]: [+deps+]
configure-[+prefix+][+module+]:
@[+ IF bootstrap +]test -f stage_last && exit 0; \
[+ ELSE bootstrap +]$(unstage)
@[+ ENDIF bootstrap +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
[+ ELSE bootstrap +]: $(MAKE); $(unstage)
@[+ ENDIF bootstrap +][+ IF check_multilibs
+]r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
echo "Checking multilib configuration for [+module+]..."; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi
@[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
@ -757,16 +775,31 @@ configure-[+prefix+][+module+]: [+deps+]
[+ FOR bootstrap_stage +]
.PHONY: configure-stage[+id+]-[+prefix+][+module+] maybe-configure-stage[+id+]-[+prefix+][+module+]
maybe-configure-stage[+id+]-[+prefix+][+module+]:
@if [+module+]-bootstrap
@if [+prefix+][+module+]-bootstrap
maybe-configure-stage[+id+]-[+prefix+][+module+]: configure-stage[+id+]-[+prefix+][+module+]
configure-stage[+id+]-[+prefix+][+module+]: [+deps+]
configure-stage[+id+]-[+prefix+][+module+]:
@[ `cat stage_current` = stage[+id+] ] || $(MAKE) stage[+id+]-start
@[ -f [+subdir+]/[+module+]/Makefile ] && exit 0 || : ; \
r=`${PWD_COMMAND}`; export r; \
@$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+]
[+ IF check_multilibs
+]@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
echo "Checking multilib configuration for [+module+]..."; \
$(CC_FOR_TARGET) --print-multi-lib > [+subdir+]/[+module+]/multilib.tmp 2> /dev/null ; \
if test -r [+subdir+]/[+module+]/multilib.out; then \
if cmp -s [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; then \
rm -f [+subdir+]/[+module+]/multilib.tmp; \
else \
rm -f [+subdir+]/[+module+]/Makefile; \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi; \
else \
mv [+subdir+]/[+module+]/multilib.tmp [+subdir+]/[+module+]/multilib.out; \
fi
@[+ ENDIF check_multilibs +]test ! -f [+subdir+]/[+module+]/Makefile || exit 0; \
[+exports+][+ IF prev +] \
[+poststage1_exports+][+ ENDIF prev +] \
echo Configuring stage [+id+] in [+subdir+]/[+module+] ; \
$(SHELL) $(srcdir)/mkinstalldirs [+subdir+]/[+module+] ; \
cd [+subdir+]/[+module+] || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
@ -778,7 +811,7 @@ configure-stage[+id+]-[+prefix+][+module+]: [+deps+]
$(SHELL) $${libsrcdir}/configure \
[+args+] $${srcdiroption} \
[+stage_configure_flags+] [+extra_configure_flags+]
@endif [+module+]-bootstrap
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
[+ ENDDEF +]
@ -792,7 +825,7 @@ TARGET-[+prefix+][+module+]=[+
maybe-all-[+prefix+][+module+]: all-[+prefix+][+module+]
all-[+prefix+][+module+]: configure-[+prefix+][+module+]
@[+ IF bootstrap +]test -f stage_last && exit 0; \
[+ ELSE bootstrap +]$(unstage)
[+ ELSE bootstrap +]: $(MAKE); $(unstage)
@[+ ENDIF bootstrap +]r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
[+exports+] \
@ -806,7 +839,7 @@ all-[+prefix+][+module+]: configure-[+prefix+][+module+]
.PHONY: clean-stage[+id+]-[+prefix+][+module+] maybe-clean-stage[+id+]-[+prefix+][+module+]
maybe-all-stage[+id+]-[+prefix+][+module+]:
maybe-clean-stage[+id+]-[+prefix+][+module+]:
@if [+module+]-bootstrap
@if [+prefix+][+module+]-bootstrap
maybe-all-stage[+id+]-[+prefix+][+module+]: all-stage[+id+]-[+prefix+][+module+]
all-stage[+id+]: all-stage[+id+]-[+prefix+][+module+]
TARGET-stage[+id+]-[+prefix+][+module+] = $(TARGET-[+prefix+][+module+])
@ -832,7 +865,7 @@ clean-stage[+id+]-[+prefix+][+module+]:
$(MAKE) [+args+] [+ IF prev +] \
[+poststage1_args+] [+ ENDIF prev +] \
[+stage_make_flags+] [+extra_make_flags+] clean
@endif [+module+]-bootstrap
@endif [+prefix+][+module+]-bootstrap
[+ ENDFOR bootstrap_stage +]
[+ ENDIF bootstrap +]
@ -872,7 +905,7 @@ check-[+module+]:
[+ ELIF no_check_cross +]
# This module is only tested in a native toolchain.
check-[+module+]:
@$(unstage)
@: $(MAKE); $(unstage)
@if [ '$(host)' = '$(target)' ] ; then \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
@ -882,7 +915,7 @@ check-[+module+]:
fi
[+ ELSE check +]
check-[+module+]:
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
@ -899,7 +932,7 @@ maybe-install-[+module+]: install-[+module+]
install-[+module+]:
[+ ELSE install +]
install-[+module+]: installdirs
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(HOST_EXPORTS) \
@ -922,7 +955,7 @@ maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
FOR depend +]\
[+depend+]-[+module+] [+
ENDFOR depend +]
@[+ IF bootstrap +][+ ELSE +]$(unstage)
@[+ IF bootstrap +][+ ELSE +]: $(MAKE); $(unstage)
@[+ ENDIF bootstrap +][ -f ./[+module+]/Makefile ] || exit 0; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
@ -948,17 +981,9 @@ maybe-[+make_target+]-[+module+]: [+make_target+]-[+module+]
# ---------------------------------------
[+ FOR target_modules +]
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
@if target-[+module+]
$(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
$(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \
rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out
@endif target-[+module+]
[+ IF raw_cxx +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
deps=(string-append "$(TARGET_SUBDIR)/" (get "module") "/multilib.out")
check_multilibs=true
exports="$(RAW_CXX_TARGET_EXPORTS)"
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
@ -967,7 +992,7 @@ $(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
args="$(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)'" +]
[+ ELSE +]
[+ configure prefix="target-" subdir="$(TARGET_SUBDIR)"
deps=(string-append "$(TARGET_SUBDIR)/" (get "module") "/multilib.out")
check_multilibs=true
exports="$(NORMAL_TARGET_EXPORTS)"
args="$(TARGET_CONFIGARGS)" no-config-site=true +]
@ -985,7 +1010,7 @@ maybe-check-target-[+module+]: check-target-[+module+]
check-target-[+module+]:
[+ ELSE check +]
check-target-[+module+]:
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
@ -1011,7 +1036,7 @@ maybe-install-target-[+module+]: install-target-[+module+]
install-target-[+module+]:
[+ ELSE install +]
install-target-[+module+]: installdirs
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
IF raw_cxx +]
@ -1038,7 +1063,7 @@ maybe-[+make_target+]-target-[+module+]: [+make_target+]-target-[+module+]
FOR depend +]\
[+depend+]-target-[+module+] [+
ENDFOR depend +]
@$(unstage)
@: $(MAKE); $(unstage)
@[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \
r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \[+
@ -1181,8 +1206,10 @@ gcc-no-fixedincludes:
# are dummy when toplevel bootstrap is not active.
# While making host and target tools, symlinks to the final stage must be
# there, so $(MAKE) $(unstage) should be run at various points. To avoid
# excessive recursive invocations of make, we "inline" them using a variable.
# there, so $(unstage) should be run at various points. To avoid excessive
# recursive invocations of make, we "inline" them using a variable. These
# must be referenced as ": $(MAKE) ; $(unstage)" rather than "$(unstage)"
# to avoid warnings from the GNU Make job server.
unstage = :
stage = :
@ -1194,16 +1221,16 @@ stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
.PHONY: unstage stage
unstage:
@$(unstage)
@: $(MAKE); $(unstage)
stage:
@$(stage)
@: $(MAKE); $(stage)
# We name the build directories for the various stages "stage1-gcc",
# "stage2-gcc","stage3-gcc", etc.
# Since the 'compare' process will fail (on debugging information) if any
# directory names are different, we need to link the gcc directory for
# the previous stage to a constant name ('gcc-prev'), and to make the name of
# the previous stage to a constant name ('prev-gcc'), and to make the name of
# the build directories constant as well. For the latter, we use naked names
# like 'gcc', because the scripts in that directory assume it. We use
# mv on platforms where symlinks to directories do not work or are not
@ -1244,10 +1271,10 @@ POSTSTAGE1_FLAGS_TO_PASS = \
.PHONY: stage[+id+]-start stage[+id+]-end
stage[+id+]-start::
@$(stage); \
@: $(MAKE); $(stage); \
echo stage[+id+] > stage_current ; \
echo stage[+id+] > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)[+
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)[+
FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@cd $(HOST_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
@ -1256,36 +1283,34 @@ stage[+id+]-start::
@CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
set stage[+prev+]-[+module+] prev-[+module+] ; \
@CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +][+
FOR target_modules +][+ IF bootstrap +]
@if target-[+ module +]
@cd $(TARGET_SUBDIR); [ -d stage[+id+]-[+module+] ] || \
mkdir stage[+id+]-[+module+]; \
set stage[+id+]-[+module+] [+module+] ; \
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@[ -d stage[+id+]-$(TARGET_SUBDIR) ] || \
mkdir stage[+id+]-$(TARGET_SUBDIR); \
set stage[+id+]-$(TARGET_SUBDIR) $(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ [+ IF prev +] ; \
set stage[+prev+]-[+module+] prev-[+module+] ; \
set stage[+prev+]-$(TARGET_SUBDIR) prev-$(TARGET_SUBDIR) ; \
@CREATE_LINK_TO_DIR@ [+ ENDIF prev +]
@endif target-[+ module +][+ ENDIF bootstrap +][+ ENDFOR target_modules +]
stage[+id+]-end::
@rm -f stage_current[+ FOR host_modules +][+ IF bootstrap +]
@if [+ module +]
@cd $(HOST_SUBDIR); set [+module+] stage[+id+]-[+module+] ; \
@if test -d $(HOST_SUBDIR) ; then \
cd $(HOST_SUBDIR); set [+module+] stage[+id+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
set prev-[+module+] stage[+prev+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +][+
FOR target_modules +][+ IF bootstrap +]
@if target-[+ module +]
@cd $(HOST_SUBDIR); set [+module+] stage[+id+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
set prev-[+module+] stage[+prev+]-[+module+] ; \
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +]
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR target_modules +]
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \
fi
@endif [+ module +][+ ENDIF bootstrap +][+ ENDFOR host_modules +]
@if test -d $(TARGET_SUBDIR) ; then \
set $(TARGET_SUBDIR) stage[+id+]-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ [+ IF prev +] ; \
set prev-$(TARGET_SUBDIR) stage[+prev+]-$(TARGET_SUBDIR) ; \
@UNDO_LINK_TO_DIR@ [+ ENDIF prev +] ; \
fi
# Bubble a bugfix through all the stages up to stage [+id+]. They
# are remade, but not reconfigured. The next stage (if any) will not
# be reconfigured as well.
# Bubble a bugfix through all the stages up to stage [+id+]. They are
# remade, but not reconfigured. The next stage (if any) will not be
# reconfigured as well.
.PHONY: stage[+id+]-bubble
stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +][+IF lean +]
@bootstrap_lean@-rm -rf stage[+lean+]-* ; $(STAMP) stage[+lean+]-lean[+ ENDIF lean +]
@ -1314,7 +1339,7 @@ do-clean: clean-stage[+id+]
echo Cannot compare object files as stage [+prev+] was deleted. ; \
exit 0 ; \
fi; \
$(stage); \
: $(MAKE); $(stage); \
rm -f .bad_compare ; \
cd stage[+id+]-gcc; \
files=`find . -name "*$(objext)" -print` ; \
@ -1349,18 +1374,18 @@ do-clean: clean-stage[+id+]
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble
@$(unstage)
@: $(MAKE); $(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
@$(stage)
@: $(MAKE); $(stage)
[+ ENDIF bootstrap-target +]
# Rules to wipe a stage and all the following ones, also used for cleanstrap
[+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +]
.PHONY: distclean-stage[+id+]
distclean-stage[+id+]::
@$(stage)
@: $(MAKE); $(stage)
rm -rf stage[+id+]-* [+
IF compare-target +][+compare-target+] [+ ENDIF compare-target +]
@ -1529,17 +1554,6 @@ install-gdb: $(INSTALL_GDB_TK)
# Regenerating top level configury
# --------------------------------
# Multilib.out tells target dirs what multilibs they should build.
# There is really only one copy. We use the 'timestamp' method to
# work around various timestamp bugs on some systems.
# We use move-if-change so that it's only considered updated when it
# actually changes, because it has to depend on a phony target.
multilib.out: maybe-all-gcc
@r=`${PWD_COMMAND}`; export r; \
echo "Checking multilib configuration..."; \
$(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \
$(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \
# Rebuilding Makefile.in, using autogen.
AUTOGEN = autogen
$(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def

161
configure vendored
View File

@ -2952,11 +2952,10 @@ esac
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
# Default behavior. (We'll) enable bootstrap if we have a compiler
# Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
# This will become 'yes'
enable_bootstrap=no ;;
enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;
@ -3309,7 +3308,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3313: checking for $ac_word" >&5
echo "configure:3312: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3349,7 +3348,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3353: checking for $ac_word" >&5
echo "configure:3352: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3388,7 +3387,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3392: checking for $ac_word" >&5
echo "configure:3391: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3427,7 +3426,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3431: checking for $ac_word" >&5
echo "configure:3430: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3467,7 +3466,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3471: checking for $ac_word" >&5
echo "configure:3470: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3506,7 +3505,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3510: checking for $ac_word" >&5
echo "configure:3509: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3559,7 +3558,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3563: checking for $ac_word" >&5
echo "configure:3562: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3600,7 +3599,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3604: checking for $ac_word" >&5
echo "configure:3603: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3648,7 +3647,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3652: checking for $ac_word" >&5
echo "configure:3651: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3679,7 +3678,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3683: checking for $ac_word" >&5
echo "configure:3682: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3723,7 +3722,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3727: checking for $ac_word" >&5
echo "configure:3726: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3754,7 +3753,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3758: checking for $ac_word" >&5
echo "configure:3757: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3798,7 +3797,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3802: checking for $ac_word" >&5
echo "configure:3801: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3829,7 +3828,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3833: checking for $ac_word" >&5
echo "configure:3832: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3873,7 +3872,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3877: checking for $ac_word" >&5
echo "configure:3876: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3904,7 +3903,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3908: checking for $ac_word" >&5
echo "configure:3907: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3948,7 +3947,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3952: checking for $ac_word" >&5
echo "configure:3951: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -3979,7 +3978,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3983: checking for $ac_word" >&5
echo "configure:3982: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4023,7 +4022,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4027: checking for $ac_word" >&5
echo "configure:4026: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4054,7 +4053,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4058: checking for $ac_word" >&5
echo "configure:4057: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4098,7 +4097,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4102: checking for $ac_word" >&5
echo "configure:4101: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4129,7 +4128,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4133: checking for $ac_word" >&5
echo "configure:4132: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4168,7 +4167,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4172: checking for $ac_word" >&5
echo "configure:4171: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4199,7 +4198,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4203: checking for $ac_word" >&5
echo "configure:4202: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4238,7 +4237,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4242: checking for $ac_word" >&5
echo "configure:4241: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4269,7 +4268,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4273: checking for $ac_word" >&5
echo "configure:4272: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4313,7 +4312,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4317: checking for $ac_word" >&5
echo "configure:4316: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4344,7 +4343,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4348: checking for $ac_word" >&5
echo "configure:4347: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4388,7 +4387,7 @@ fi
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4392: checking for $ac_word" >&5
echo "configure:4391: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4419,7 +4418,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4423: checking for $ac_word" >&5
echo "configure:4422: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4470,7 +4469,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4474: checking for $ac_word" >&5
echo "configure:4473: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4501,7 +4500,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4505: checking for $ac_word" >&5
echo "configure:4504: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4545,7 +4544,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4549: checking for $ac_word" >&5
echo "configure:4548: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4576,7 +4575,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4580: checking for $ac_word" >&5
echo "configure:4579: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4620,7 +4619,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4624: checking for $ac_word" >&5
echo "configure:4623: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4651,7 +4650,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4655: checking for $ac_word" >&5
echo "configure:4654: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4695,7 +4694,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4699: checking for $ac_word" >&5
echo "configure:4698: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4726,7 +4725,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4730: checking for $ac_word" >&5
echo "configure:4729: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4770,7 +4769,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4774: checking for $ac_word" >&5
echo "configure:4773: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4801,7 +4800,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4805: checking for $ac_word" >&5
echo "configure:4804: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4845,7 +4844,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4849: checking for $ac_word" >&5
echo "configure:4848: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4876,7 +4875,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4880: checking for $ac_word" >&5
echo "configure:4879: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4915,7 +4914,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4919: checking for $ac_word" >&5
echo "configure:4918: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4946,7 +4945,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4950: checking for $ac_word" >&5
echo "configure:4949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -4990,7 +4989,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:4994: checking for $ac_word" >&5
echo "configure:4993: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5021,7 +5020,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5025: checking for $ac_word" >&5
echo "configure:5024: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5065,7 +5064,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5069: checking for $ac_word" >&5
echo "configure:5068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5096,7 +5095,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5100: checking for $ac_word" >&5
echo "configure:5099: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5140,7 +5139,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5144: checking for $ac_word" >&5
echo "configure:5143: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5171,7 +5170,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5175: checking for $ac_word" >&5
echo "configure:5174: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5215,7 +5214,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5219: checking for $ac_word" >&5
echo "configure:5218: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5246,7 +5245,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5250: checking for $ac_word" >&5
echo "configure:5249: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5290,7 +5289,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5294: checking for $ac_word" >&5
echo "configure:5293: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5321,7 +5320,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5325: checking for $ac_word" >&5
echo "configure:5324: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5365,7 +5364,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5369: checking for $ac_word" >&5
echo "configure:5368: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5396,7 +5395,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5400: checking for $ac_word" >&5
echo "configure:5399: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5435,7 +5434,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5439: checking for $ac_word" >&5
echo "configure:5438: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5466,7 +5465,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5470: checking for $ac_word" >&5
echo "configure:5469: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5510,7 +5509,7 @@ fi
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5514: checking for $ac_word" >&5
echo "configure:5513: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5541,7 +5540,7 @@ fi
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:5545: checking for $ac_word" >&5
echo "configure:5544: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@ -5584,7 +5583,7 @@ fi
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
echo "configure:5588: checking where to find the target ar" >&5
echo "configure:5587: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5609,7 +5608,7 @@ else
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
echo "configure:5613: checking where to find the target as" >&5
echo "configure:5612: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5634,7 +5633,7 @@ else
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
echo "configure:5638: checking where to find the target cc" >&5
echo "configure:5637: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5659,7 +5658,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
echo "configure:5663: checking where to find the target c++" >&5
echo "configure:5662: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5687,7 +5686,7 @@ else
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
echo "configure:5691: checking where to find the target c++ for libstdc++" >&5
echo "configure:5690: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5715,7 +5714,7 @@ else
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
echo "configure:5719: checking where to find the target dlltool" >&5
echo "configure:5718: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5740,7 +5739,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
echo "configure:5744: checking where to find the target gcc" >&5
echo "configure:5743: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5765,7 +5764,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
echo "configure:5769: checking where to find the target gcj" >&5
echo "configure:5768: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5793,7 +5792,7 @@ else
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
echo "configure:5797: checking where to find the target gfortran" >&5
echo "configure:5796: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5821,7 +5820,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
echo "configure:5825: checking where to find the target ld" >&5
echo "configure:5824: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5846,7 +5845,7 @@ else
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
echo "configure:5850: checking where to find the target lipo" >&5
echo "configure:5849: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5861,7 +5860,7 @@ else
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
echo "configure:5865: checking where to find the target nm" >&5
echo "configure:5864: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5886,7 +5885,7 @@ else
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
echo "configure:5890: checking where to find the target objdump" >&5
echo "configure:5889: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5911,7 +5910,7 @@ else
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
echo "configure:5915: checking where to find the target ranlib" >&5
echo "configure:5914: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5936,7 +5935,7 @@ else
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
echo "configure:5940: checking where to find the target strip" >&5
echo "configure:5939: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -5961,7 +5960,7 @@ else
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
echo "configure:5965: checking where to find the target windres" >&5
echo "configure:5964: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
# Canadian cross, just use what we found
echo "$ac_t""pre-installed" 1>&6
@ -6014,7 +6013,7 @@ fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:6018: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo "configure:6017: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@ -6061,7 +6060,7 @@ esac
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
echo "configure:6065: checking if symbolic links between directories work" >&5
echo "configure:6064: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else

5
configure.in
View File

@ -1742,11 +1742,10 @@ esac
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
# Default behavior. (We'll) enable bootstrap if we have a compiler
# Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
# This will become 'yes'
enable_bootstrap=no ;;
enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;