diff --git a/newlib/ChangeLog b/newlib/ChangeLog index d14722fc0..dabd5d7c4 100644 --- a/newlib/ChangeLog +++ b/newlib/ChangeLog @@ -1,3 +1,14 @@ +2003-06-10 Stan Cox + Anthony Green + + * configure.host: Add iq2000 support. + * newlib/libc/include/machine/ieeefp.h: Ditto. + * newlib/libc/include/machine/setjmp.h: Ditto. + * libc/machine/iq2000, libc/machine/iq2000/setjmp.S, + libc/machine/iq2000/aclocal.m4, libc/machine/iq2000/configure, + libc/machine/iq2000/configure.in, libc/machine/iq2000/Makefile.am, + libc/machine/iq2000/Makefile.in: New files. + 2003-06-10 Richard Sandiford * libc/sys/h8300hms/setarch.h: New file. diff --git a/newlib/configure.host b/newlib/configure.host index 3c6f24b08..02118d86b 100644 --- a/newlib/configure.host +++ b/newlib/configure.host @@ -131,6 +131,9 @@ case "${host_cpu}" in ;; ia64*) ;; + iq2000) + machine_dir=iq2000 + ;; m32r*) machine_dir=m32r ;; @@ -515,6 +518,10 @@ case "${host}" in i[34567]86-*-netware*) newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES -DNO_EXEC -DABORT_PROVIDED -DCLOCK_PROVIDED -DMALLOC_PROVIDED -DHAVE_FCNTL" ;; + iq2000*) + syscall_dir=syscalls + newlib_cflags="${newlib_cflags} -DWANT_PRINTF_LONG_LONG" + ;; m32r-*-*) # Pass -msdata=sdata so _impure_ptr goes in .sdata. # We don't generate sda relocs however for upward compatibility. diff --git a/newlib/libc/include/machine/ieeefp.h b/newlib/libc/include/machine/ieeefp.h index 6eeb381bd..573cc28de 100644 --- a/newlib/libc/include/machine/ieeefp.h +++ b/newlib/libc/include/machine/ieeefp.h @@ -234,6 +234,10 @@ #define _DOUBLE_IS_32BITS #endif +#ifdef __iq2000__ +#define __IEEE_BIG_ENDIAN +#endif + #ifdef __MAVERICK__ #ifdef __ARMEL__ # define __IEEE_LITTLE_ENDIAN diff --git a/newlib/libc/include/machine/setjmp.h b/newlib/libc/include/machine/setjmp.h index 405eb2c68..7f08a017a 100644 --- a/newlib/libc/include/machine/setjmp.h +++ b/newlib/libc/include/machine/setjmp.h @@ -167,6 +167,10 @@ typedef int jmp_buf[_JBLEN]; #define _JBLEN 10 #endif +#ifdef __iq2000__ +#define _JBLEN 32 +#endif + #ifdef __mcore__ #define _JBLEN 16 #endif diff --git a/newlib/libc/machine/iq2000/Makefile.am b/newlib/libc/machine/iq2000/Makefile.am new file mode 100644 index 000000000..1c65b9ffe --- /dev/null +++ b/newlib/libc/machine/iq2000/Makefile.am @@ -0,0 +1,12 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = setjmp.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff --git a/newlib/libc/machine/iq2000/Makefile.in b/newlib/libc/machine/iq2000/Makefile.in new file mode 100644 index 000000000..b794ff2bb --- /dev/null +++ b/newlib/libc/machine/iq2000/Makefile.in @@ -0,0 +1,327 @@ +# Makefile.in generated automatically by automake 1.4 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +AR = @AR@ +AS = @AS@ +CC = @CC@ +CPP = @CPP@ +EXEEXT = @EXEEXT@ +LDFLAGS = @LDFLAGS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +NEWLIB_CFLAGS = @NEWLIB_CFLAGS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +VERSION = @VERSION@ +aext = @aext@ +libm_machine_dir = @libm_machine_dir@ +machine_dir = @machine_dir@ +newlib_basedir = @newlib_basedir@ +oext = @oext@ +sys_dir = @sys_dir@ + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = setjmp.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = @CPPFLAGS@ +LIBS = @LIBS@ +lib_a_LIBADD = +lib_a_OBJECTS = setjmp.o +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +SOURCES = $(lib_a_SOURCES) +OBJECTS = $(lib_a_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \ + ../../../acinclude.m4 ../../../aclocal.m4 \ + ../../../libtool.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +mostlyclean-noinstLIBRARIES: + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +distclean-noinstLIBRARIES: + +maintainer-clean-noinstLIBRARIES: + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) + -rm -f lib.a + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) + $(RANLIB) lib.a + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: +install-info: install-info-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(LIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-noinstLIBRARIES distclean-compile \ + distclean-tags distclean-generic clean-am + +distclean: distclean-am + -rm -f config.status + +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + -rm -f config.status + +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-info-am install-info \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/newlib/libc/machine/iq2000/aclocal.m4 b/newlib/libc/machine/iq2000/aclocal.m4 new file mode 100644 index 000000000..8e46a11f3 --- /dev/null +++ b/newlib/libc/machine/iq2000/aclocal.m4 @@ -0,0 +1,334 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + +dnl This provides configure definitions used by all the newlib +dnl configure.in files. + +dnl Basic newlib configury. This calls basic introductory stuff, +dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs +dnl configure.host. The only argument is the relative path to the top +dnl newlib directory. + +AC_DEFUN(NEWLIB_CONFIGURE, +[ +dnl Default to --enable-multilib +AC_ARG_ENABLE(multilib, +[ --enable-multilib build many library versions (default)], +[case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; + esac], [multilib=yes])dnl + +dnl Support --enable-target-optspace +AC_ARG_ENABLE(target-optspace, +[ --enable-target-optspace optimize for space], +[case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; + esac], [target_optspace=])dnl + +dnl Support --enable-malloc-debugging - currently only supported for Cygwin +AC_ARG_ENABLE(malloc-debugging, +[ --enable-malloc-debugging indicate malloc debugging requested], +[case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; + esac], [malloc_debugging=])dnl + +dnl Support --enable-newlib-mb +AC_ARG_ENABLE(newlib-mb, +[ --enable-newlib-mb enable multibyte support], +[case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; + esac], [newlib_mb=])dnl + +dnl Support --enable-newlib-multithread +AC_ARG_ENABLE(newlib-multithread, +[ --enable-newlib-multithread enable support for multiple threads], +[case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;; + esac], [newlib_multithread=yes])dnl + +dnl Support --enable-newlib-elix-level +AC_ARG_ENABLE(newlib-elix-level, +[ --enable-newlib-elix-level supply desired elix library level (1-4)], +[case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;; + esac], [newlib_elix_level=0])dnl + +dnl Support --disable-newlib-io-float +AC_ARG_ENABLE(newlib-io-float, +[ --disable-newlib-io-float disable printf/scanf family float support], +[case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;; + esac], [newlib_io_float=yes])dnl + +dnl Support --disable-newlib-supplied-syscalls +AC_ARG_ENABLE(newlib-supplied-syscalls, +[ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls], +[case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;; + esac], [newlib_may_supply_syscalls=yes])dnl + +AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes) + +dnl We may get other options which we don't document: +dnl --with-target-subdir, --with-multisrctop, --with-multisubdir + +test -z "[$]{with_target_subdir}" && with_target_subdir=. + +if test "[$]{srcdir}" = "."; then + if test "[$]{with_target_subdir}" != "."; then + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" + else + newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" + fi +else + newlib_basedir="[$]{srcdir}/$1" +fi +AC_SUBST(newlib_basedir) + +AC_CANONICAL_SYSTEM + +AM_INIT_AUTOMAKE(newlib, 1.11.0) + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + +AC_DEFUN(LIB_AC_PROG_CC, +[AC_BEFORE([$0], [AC_PROG_CPP])dnl +AC_CHECK_PROG(CC, gcc, gcc) +if test -z "$CC"; then + AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) + test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) +fi + +AC_PROG_CC_GNU + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +dnl Check whether -g works, even if CFLAGS is set, in case the package +dnl plays around with CFLAGS (such as to build both debugging and +dnl normal versions of a library), tasteless as that idea is. + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + AC_PROG_CC_G + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi +]) + +LIB_AC_PROG_CC + +AC_CHECK_TOOL(AS, as) +AC_CHECK_TOOL(AR, ar) +AC_CHECK_TOOL(RANLIB, ranlib, :) + +AC_PROG_INSTALL + +AM_MAINTAINER_MODE + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + AC_EXEEXT +fi + +. [$]{newlib_basedir}/configure.host + +newlib_cflags="[$]{newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} +AC_SUBST(NEWLIB_CFLAGS) + +LDFLAGS=${ldflags} +AC_SUBST(LDFLAGS) + +AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0) +AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1) +AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2) +AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3) +AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4) + +AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + +AC_SUBST(OBJEXT) +AC_SUBST(oext) +AC_SUBST(aext) + +AC_SUBST(libm_machine_dir) +AC_SUBST(machine_dir) +AC_SUBST(sys_dir) +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + diff --git a/newlib/libc/machine/iq2000/configure b/newlib/libc/machine/iq2000/configure new file mode 100755 index 000000000..6ff88da2a --- /dev/null +++ b/newlib/libc/machine/iq2000/configure @@ -0,0 +1,1888 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help + --enable-multilib build many library versions (default)" +ac_help="$ac_help + --enable-target-optspace optimize for space" +ac_help="$ac_help + --enable-malloc-debugging indicate malloc debugging requested" +ac_help="$ac_help + --enable-newlib-mb enable multibyte support" +ac_help="$ac_help + --enable-newlib-multithread enable support for multiple threads" +ac_help="$ac_help + --enable-newlib-elix-level supply desired elix library level (1-4)" +ac_help="$ac_help + --disable-newlib-io-float disable printf/scanf family float support" +ac_help="$ac_help + --disable-newlib-supplied-syscalls disable newlib from supplying syscalls" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +sitefile= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=setjmp.S + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi + fi +else + CONFIG_SITE="$sitefile" +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +ac_aux_dir= +for ac_dir in ../../../.. $srcdir/../../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:588: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:641: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:731: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:764: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes + +# Check whether --enable-multilib or --disable-multilib was given. +if test "${enable_multilib+set}" = set; then + enableval="$enable_multilib" + case "${enableval}" in + yes) multilib=yes ;; + no) multilib=no ;; + *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;; + esac +else + multilib=yes +fi + +# Check whether --enable-target-optspace or --disable-target-optspace was given. +if test "${enable_target_optspace+set}" = set; then + enableval="$enable_target_optspace" + case "${enableval}" in + yes) target_optspace=yes ;; + no) target_optspace=no ;; + *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;; + esac +else + target_optspace= +fi + +# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given. +if test "${enable_malloc_debugging+set}" = set; then + enableval="$enable_malloc_debugging" + case "${enableval}" in + yes) malloc_debugging=yes ;; + no) malloc_debugging=no ;; + *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;; + esac +else + malloc_debugging= +fi + +# Check whether --enable-newlib-mb or --disable-newlib-mb was given. +if test "${enable_newlib_mb+set}" = set; then + enableval="$enable_newlib_mb" + case "${enableval}" in + yes) newlib_mb=yes ;; + no) newlib_mb=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;; + esac +else + newlib_mb= +fi + +# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given. +if test "${enable_newlib_multithread+set}" = set; then + enableval="$enable_newlib_multithread" + case "${enableval}" in + yes) newlib_multithread=yes ;; + no) newlib_multithread=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;; + esac +else + newlib_multithread=yes +fi + +# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given. +if test "${enable_newlib_elix_level+set}" = set; then + enableval="$enable_newlib_elix_level" + case "${enableval}" in + 0) newlib_elix_level=0 ;; + 1) newlib_elix_level=1 ;; + 2) newlib_elix_level=2 ;; + 3) newlib_elix_level=3 ;; + 4) newlib_elix_level=4 ;; + *) { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;; + esac +else + newlib_elix_level=0 +fi + +# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given. +if test "${enable_newlib_io_float+set}" = set; then + enableval="$enable_newlib_io_float" + case "${enableval}" in + yes) newlib_io_float=yes ;; + no) newlib_io_float=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;; + esac +else + newlib_io_float=yes +fi + +# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given. +if test "${enable_newlib_supplied_syscalls+set}" = set; then + enableval="$enable_newlib_supplied_syscalls" + case "${enableval}" in + yes) newlib_may_supply_syscalls=yes ;; + no) newlib_may_supply_syscalls=no ;; + *) { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;; + esac +else + newlib_may_supply_syscalls=yes +fi + + + +if test x${newlib_may_supply_syscalls} = xyes; then + MAY_SUPPLY_SYSCALLS_TRUE= + MAY_SUPPLY_SYSCALLS_FALSE='#' +else + MAY_SUPPLY_SYSCALLS_TRUE='#' + MAY_SUPPLY_SYSCALLS_FALSE= +fi + + +test -z "${with_target_subdir}" && with_target_subdir=. + +if test "${srcdir}" = "."; then + if test "${with_target_subdir}" != "."; then + newlib_basedir="${srcdir}/${with_multisrctop}../../../.." + else + newlib_basedir="${srcdir}/${with_multisrctop}../../.." + fi +else + newlib_basedir="${srcdir}/../../.." +fi + + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:944: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:965: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:983: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + + + +PACKAGE=newlib + +VERSION=1.11.0 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <> confdefs.h <&6 +echo "configure:1026: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:1039: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:1052: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:1065: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:1078: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + + + +# FIXME: We temporarily define our own version of AC_PROG_CC. This is +# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We +# are probably using a cross compiler, which will not be able to fully +# link an executable. This should really be fixed in autoconf +# itself. + + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1103: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1133: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1182: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" + fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + +# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1237: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_AS="${ac_tool_prefix}as" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as" +fi +fi +AS="$ac_cv_prog_AS" +if test -n "$AS"; then + echo "$ac_t""$AS" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + +# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1269: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" +fi +fi +AR="$ac_cv_prog_AR" +if test -n "$AR"; then + echo "$ac_t""$AR" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1301: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1333: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + RANLIB=":" +fi +fi + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1378: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:1432: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + +# We need AC_EXEEXT to keep automake happy in cygnus mode. However, +# at least currently, we never actually build a program, so we never +# need to use $(EXEEXT). Moreover, the test for EXEEXT normally +# fails, because we are probably configuring with a cross compiler +# which can't create executables. So we include AC_EXEEXT to keep +# automake happy, but we don't execute it, since we don't care about +# the result. +if false; then + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1466: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:1476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + +fi + +. ${newlib_basedir}/configure.host + +newlib_cflags="${newlib_cflags} -fno-builtin" + +NEWLIB_CFLAGS=${newlib_cflags} + + +LDFLAGS=${ldflags} + + + + +if test x${newlib_elix_level} = x0; then + ELIX_LEVEL_0_TRUE= + ELIX_LEVEL_0_FALSE='#' +else + ELIX_LEVEL_0_TRUE='#' + ELIX_LEVEL_0_FALSE= +fi + + +if test x${newlib_elix_level} = x1; then + ELIX_LEVEL_1_TRUE= + ELIX_LEVEL_1_FALSE='#' +else + ELIX_LEVEL_1_TRUE='#' + ELIX_LEVEL_1_FALSE= +fi + + +if test x${newlib_elix_level} = x2; then + ELIX_LEVEL_2_TRUE= + ELIX_LEVEL_2_FALSE='#' +else + ELIX_LEVEL_2_TRUE='#' + ELIX_LEVEL_2_FALSE= +fi + + +if test x${newlib_elix_level} = x3; then + ELIX_LEVEL_3_TRUE= + ELIX_LEVEL_3_FALSE='#' +else + ELIX_LEVEL_3_TRUE='#' + ELIX_LEVEL_3_FALSE= +fi + + +if test x${newlib_elix_level} = x4; then + ELIX_LEVEL_4_TRUE= + ELIX_LEVEL_4_FALSE='#' +else + ELIX_LEVEL_4_TRUE='#' + ELIX_LEVEL_4_FALSE= +fi + + + +if test x${use_libtool} = xyes; then + USE_LIBTOOL_TRUE= + USE_LIBTOOL_FALSE='#' +else + USE_LIBTOOL_TRUE='#' + USE_LIBTOOL_FALSE= +fi + +# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we +# use oext, which is set in configure.host based on the target platform. +OBJEXT=${oext} + + + + + + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g +s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g +s%@newlib_basedir@%$newlib_basedir%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@SET_MAKE@%$SET_MAKE%g +s%@CC@%$CC%g +s%@AS@%$AS%g +s%@AR@%$AR%g +s%@RANLIB@%$RANLIB%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g +s%@MAINT@%$MAINT%g +s%@EXEEXT@%$EXEEXT%g +s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g +s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g +s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g +s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g +s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g +s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g +s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g +s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g +s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g +s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g +s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g +s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g +s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g +s%@OBJEXT@%$OBJEXT%g +s%@oext@%$oext%g +s%@aext@%$aext%g +s%@libm_machine_dir@%$libm_machine_dir%g +s%@machine_dir@%$machine_dir%g +s%@sys_dir@%$sys_dir%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/newlib/libc/machine/iq2000/configure.in b/newlib/libc/machine/iq2000/configure.in new file mode 100644 index 000000000..c6aa0d1fb --- /dev/null +++ b/newlib/libc/machine/iq2000/configure.in @@ -0,0 +1,12 @@ +dnl This is the newlib/libc/machine/iq2000 configure.in file. +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.5) +AC_INIT(Makefile.am) + +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. +AC_CONFIG_AUX_DIR(../../../..) + +NEWLIB_CONFIGURE(../../..) + +AC_OUTPUT(Makefile) diff --git a/newlib/libc/machine/iq2000/setjmp.S b/newlib/libc/machine/iq2000/setjmp.S new file mode 100644 index 000000000..cb094630d --- /dev/null +++ b/newlib/libc/machine/iq2000/setjmp.S @@ -0,0 +1,51 @@ +/* This is a simple version of setjmp and longjmp for iq2000. */ + + +/* int setjmp (jmp_buf); */ + .globl setjmp + .ent setjmp +setjmp: + sw r16,0(r4) /* rs0 */ + sw r17,4(r4) /* rs1 */ + sw r18,8(r4) /* rs2 */ + sw r19,12(r4) /* rs3 */ + sw r20,16(r4) /* rs4 */ + sw r21,20(r4) /* rs5 */ + sw r22,24(r4) /* rs6 */ + sw r23,28(r4) /* rs7 */ + sw r30,32(r4) /* rs8 */ + + sw r29,36(r4) + sw r31,40(r4) + + move r2,r0 + + j r31 + + .end setjmp + +/* volatile void longjmp (jmp_buf, int); */ + .globl longjmp + .ent longjmp +longjmp: + lw r16,0(r4) /* rs0 */ + lw r17,4(r4) /* rs1 */ + lw r18,8(r4) /* rs2 */ + lw r19,12(r4) /* rs3 */ + lw r20,16(r4) /* rs4 */ + lw r21,20(r4) /* rs5 */ + lw r22,24(r4) /* rs6 */ + lw r23,28(r4) /* rs7 */ + lw r30,32(r4) /* rs8 */ + + lw r29,36(r4) + lw r31,40(r4) + + bne r5,r0,1f + li r5,1 +1: + move r2,r5 + + j r31 + + .end longjmp