`both*'. New configure option --{en,dis}able-ld.
ld, gold/
* configure.ac: For --enable-gold, handle value `default' instead of
`both*'. Always install ld as ld.gold, install as ld if gold is
the default.
/:
PR other/46202
* configure.ac: Fix just-built in-tree STRIP name to be
binutils/strip-new.
* configure: Regenerate.
* Makefile.def (install-strip-gcc, install-strip-binutils)
(install-strip-opcodes, install-strip-ld, install-strip-itcl)
(install-strip-sid): Mirror dependencies on non-strip variants
of these targets on the respective -strip prerequisites.
* Makefile.tpl (install-strip, install-strip-host)
(install-strip-target): New targets.
(install-strip-[+module+], install-strip-target-[+module+]):
New targets.
* Makefile.in: Regenerate.
etc/:
* Makefile.in (install-strip): New target.
libiberty/:
PR other/46202
* Makefile.in (install-strip): New phony target.
(install): Also mark as phony.
PR lto/46273
* configure.ac: Remove libelf tests. Build lto-plugin on ELF always
and on other supported platforms whenever LTO is enabled.
* configure: Rebuild.
(--enable-lto): Turn on by default for all non-ELF platforms that
have had LTO support added so far. Set build_lto_plugin appropriately
for both ELF and non-ELF.
(configdirs): Add lto-plugin or not based on build_lto_plugin.
* configure: Regenerate.
/:
PR bootstrap/45326
PR bootstrap/45174
* configure.ac: Honor initial values of $build_configargs,
$host_configargs, $target_configargs. Mark the precious, so
environment settings get recorded.
* configure: Regenerate.
/:
Sync from GCC:
2010-09-30 Michael Eager <eager@eagercon.com>
* configure.ac (microblaze): Add target-libssp to noconfigdirs.
* configure: Regenerate.
2010-09-21 Iain Sandoe <iains@gcc.gnu.org>
* configure.ac (enable-lto): Add Darwin to the list of supported lto
targets and amend comment.
* configure: Regenerate.
2010-09-03 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Enable LTO by default on Darwin.
* configure: Regenerate.
2010-07-23 Marc Glisse <marc.glisse@normalesup.org>
PR bootstrap/44455
* configure.ac (extra_mpfr_configure_flags): Copy from
extra_mpc_gmp_configure_flags.
* configure: Re-generated.
config/:
Sync from GCC:
2010-09-10 Jonathan Yong <jon_y@users.sourceforge.net>
* dfp.m4: Enable decimal float for i?86 cygwin
and mingw, and for x86_64 mingw.
/:
Sync from GCC:
2010-05-05 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Allow all the versions greater than 0.10 of PPL.
* configure: Regenerated.
2010-04-20 Eric Botcazou <ebotcazou@adacore.com>
* configure.ac (BUILD_CONFIG): Redirect output to /dev/null.
* configure: Regenerate.
2010-04-17 Ralf Corsépius <ralf.corsepius@rtems.org>
* configure.ac (*-*-rtems*): Add target-libiberty to $skipdirs.
* configure: Regenerate.
2010-04-16 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
separately.
* configure: Regenerate.
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* configure: Regenerate after change to elf.m4.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Add brackets around AC_TRY_COMPILE alternative.
* configure: Regenerated.
2010-04-02 Sebastian Pop <sebastian.pop@amd.com>
* configure.ac: Print "buggy but acceptable" when CLooG
revision is less than 9.
* configure: Regenerated.
config/:
Sync from GCC:
2010-04-13 Steve Ellcey <sje@cup.hp.com>
* elf.m4: Add hppa[12]*-*-hpux* to list of non-elf platforms.
2010-01-05 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* stdint.m4 (GCC_HEADER_STDINT): Don't typedef uint8_t etc. if
corresponding macros already exist.
bfd/:
* configure: Regenerate.
2010-05-18 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): All *-apple-darwin* now support LTO.
* configure: Regenerate.
2010-05-07 Steven Bosscher <steven AT gcc.gnu.org>
* configure.ac (--enable-lto): Add x86_64-apple-darwin* as
a platform that supports LTO.
* configure: Regenerate.
2010-04-27 Dave Korn <dave.korn.cygwin AT gmail.com>
PR lto/42776
* configure.ac (--enable-lto): Refactor handling so libelf tests
are only performed inside then-clause of ACX_ELF_TARGET_IFELSE,
and allow LTO to be explicitly enabled on non-ELF platforms that
are known to support it inside else-clause.
* configure: Regenerate.
/:
PR bootstrap/43328
* configure.ac: Do not pass --enable-multilib nor
--disable-multilib in baseargs. Accept explicitly passed
--enable_multilib.
* configure: Regenerate.
2010-03-19 Jack Howarth <howarth@bromo.med.uc.edu>
PR ada/42554
* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
* configure: Regenerate.
* Makefile.tpl (local-distclean): Also remove config.cache files in
sub-directories as there may not be Makefiles present in the
sub-directories.
* Makefile.in: Regenerate.
* configure.ac: Revert previous delta.
* configure: Regenerate.
of ppl and cloog. Fix in-tree configury of libelf, skip tests.
Fix portability of test of C++ as bootstrap language. Add
ppl/src/ppl-config.o to the bootstrap compare exclusion list.
* configure: Rebuild.
* Makefile.def: Drop host and target settings from gmp, mpfr, ppl,
and cloog. Fix in-tree ppl configuration. Introduce libelf
in-tree building.
* Makefile.tpl (POSTSTAGE1_CXX_EXPORT): New.
(POSTSTAGE1_HOST_EXPORTS): Use it.
(STAGE[+id+]_CXXFLAGS): New.
(BASE_FLAGS_TO_PASS): Pass it down.
(configure-stage[+id+]-[+prefix+][+module+]): Use it. Add
extra_exports.
(all-stage[+id+]-[+prefix+][+module+]): Likewise.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): Add
extra_exports.
* Makefile.in: Rebuild.
* configure.ac (FLAGS_FOR_TARGET): Add -L and -isystem
paths for *-w64-mingw* and x86_64-*mingw*.
* configure: Regenerated.
* configure.ac: Disable target-winsup & co for
x86_64-*-mingw* and *-w64-mingw* targets.
* configure: Regenerated.
* configure.ac (CLooG test): Use = with test.
* configure: Regenerate.
* configure.ac: Do not set LIBS for ppl/cloog checks. Disable
cloog if the ppl version check failed. Move flags saving
before setting in libelf check.
* configure: Regenerate.
* configure.ac: Adjust the ppl and cloog configure to work as
documented. Disable cloog if ppl was disabled. Omit the version
checks if they were disabled.
* configure: Re-generate.
/:
* configure.ac: Do not use $extrasub for replacing @if/@endif
parts in Makefile; instead, use additional arguments to
AC_CONFIG_COMMANDS to do the replacement manually, with several
sed invocations, to avoid HP-UX sed command limits.
* configure: Regenerate.
/:
* configure.ac: Call AC_DISABLE_OPTION_CHECKING.
(baseargs): Add --disable-option-checking.
* configure: Regenerate.
config/:
* override.m4 (AC_DISABLE_OPTION_CHECKING): Define to be
empty if not defined, to avoid error with 2.59.
(_AC_LANG_IO_PROGRAM): When the Autoconf version is exactly
2.64, avoid per-language instances to drop fopen from test
program.
/:
2009-07-31 Christian Bruel <christian.bruel@st.com>
* configure.ac (sh*-*-elf): Don't add target-libgloss to noconfigdirs.
* configure: Regenerate.
2009-07-06 Ian Lance Taylor <iant@google.com>
* configure.ac: Add missing comma in AC_ARG_WITH(boot-libs).
* configure: Rebuild.
2009-06-26 Steve Ellcey <sje@cup.hp.com>
PR bootstrap/40338
* configure.ac (comparestring): Create new variable.
* Makefile.tpl (comparestring): Use to skip some comparisions.
* configure: Regenerate.
* Makefile.in: Regenerate.
2009-06-23 Ian Lance Taylor <iant@google.com>
* configure.ac: Add --enable-build-with-cxx. When set, add c++ to
boot_languages. Only bootstrap target libraries listed in
target_libs for some boot language. Add --with-stage1-ldflags,
--with-stage1-libs, --with-boot-ldflags, --with-boot-libs. Remove
with_host_libstdcxx from ppllibs. Only add -fkeep-inline-functions
if not building with C++.
* Makefile.def: For target_module libstdc++-v3, set bootstrap=true.
* Makefile.tpl (STAGE1_LDFLAGS, STAGE1_LIBS): New variables.
(POSTSTAGE1_LDFLAGS, POSTSTAGE1_LIBS): New variables.
(HOST_EXPORTS): Add STAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_HOST_EXPORTS): Set CXX and CXX_FOR_BUILD. Add
POSTSTAGE1_LDFLAGS to LDFLAGS. Export HOST_LIBS.
(POSTSTAGE1_FLAGS_TO_PASS): Likewise.
* configure, Makefile.in: Rebuild.
2009-06-08 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.ac: Detect MPC in default directory.
* configure: Regenerate.
2009-06-02 Richard Sandiford <r.sandiford@uk.ibm.com>
* configure.ac (powerpc-*-aix*, rs6000-*-aix*): Add target-newlib
to noconfdirs.
* configure: Regenerate.
2009-05-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* Makefile.def: Add MPC support and dependencies.
* configure.ac: Likewise. Reorganize GMP/MPFR checks.
* Makefile.in, configure: Regenerate.
2009-05-24 Nicolas Roche <roche@adacore.com>
* Makefile.tpl (compare-target): Skip ./ada/*tools directories.
* Makefile.in: Regenerate.
2009-05-21 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac (cygwin noconfigdirs): Remove libgcj.
* configure: Regenerate.
2009-05-07 Dave Korn <dave.korn.cygwin@gmail.com>
* configure.ac ($with_ppl): Default to no if not supplied.
($with_cloog): Likewise.
configure: Regenerate.
2009-04-24 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
PR bootstrap/39739
* configure.ac (extra_mpfr_configure_flags): Set and AC_SUBST.
* Makefile.def (module=mpfr): Use extra_mpfr_configure_flags.
* configure, Makefile.in: Regenerate.
2009-04-14 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Change copyright header to refer to version
3 of the GNU General Public License and to point readers at the
COPYING3 file and the FSF's license web page.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* Makefile.in: Regenerate.
2009-04-09 Jack Howarth <howarth@bromo.med.uc.edu>
* configure.ac: Restore match for darwin9 or later. Use double
brackets since regeneration eats one pair.
* configure: Regenerate.
Alexandre Oliva