* elf32-ppc.c (R_PPC_RELAX32): New relocation.
(ppc_elf_install_value): New function.
(ppc_elf_sort_rela): Remove.
(ppc_elf_relax_section): Rewrite. Remove old relaxation
and replace with out of range branch stubs.
(ppc_elf_relocate_section): Handle R_PPC_RELAX32.
2003-07-28 Eric Christopher <echristo@redhat.com>
* ppc.h (R_PPC_RELAX32): New. Fake relocation.
gcc:
* config/sh/sh.h (EXTRA_SPECS): Add subtarget_asm_relax_spec and
subtarget_asm_isa_spec.
(SUBTARGET_ASM_RELAX_SPEC, SUBTARGET_ASM_ISA_SPEC): Define.
(ASM_SPEC): Define as SH_ASM_SPEC.
(SH_ASM_SPEC): New; take the role of ASM_SPEC, but safe from svr4.h.
Use subtarget_asm_relax_spec and subtarget_asm_isa_spec.
* config/sh/elf.h (ASM_SPEC): Use SH_ASM_SPEC.
(SUBTARGET_ASM_ISA_SPEC): Undef / define.
gcc/testsuite:
gcc.dg/sh-relax.c: New test.
include/elf:
* sh.h (EF_SH_MERGE_MACH): Make sure SH2E & SH3/SH3E merge to SH3E,
and SH2E & SH4 merge to SH4, not SH2E.
gas:
* config/tc-sh.c (sh_dsp): Replace with preset_target_arch.
(md_begin): Use preset_target_arch.
(md_longopts): Make isa option unconditional.
(md_parse_option): Make OPTION_DSP and OPTION_ISA sh4 / any
set preset_target_arch.
(md_apply_fix3): If BFD_ASSEMBLER, adjust SWITCH_TABLE fixups
by -S_GET_VALUE (fixP->fx_subsy).
(tc_gen_reloc): For SWITCH_TABLE fixups, the symbol is fixp->fx_subsy,
and the addend is 0.
Adjust addend of R_SH_IND12W relocations by fixp->fx_offset - 4.
* config/tc-sh.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
bfd:
elf32-sh.c (sh_elf_howto_tab): Make R_SH_IND12W into an ordinary
relocation (no special function), and make it non-partial_inplace.
(sh_elf_relax_section): When creating a bsr, use a consistent value
no matter if the symbol is extern or not; set addend to -4.
Don't swap load / non-load instructions for SH4.
(sh_elf_relax_delete_bytes): In R_SH_IND12W case, check the offset
rather than if the symbol is external to determine if adjusting the
offset makes sense. Adjust the addend too if appropriate.
(sh_elf_relocate_section): In R_SH_IND12W, don't fiddle with the
relocation.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
EF_M68HC11_ABI): Define for ABI specification.
(STO_M68HC12_FAR, STO_M68HC12_INTERRUPT): Symbol flags for
linker and debugger.
(R_M68HC11_24, R_M68HC11_LO16, R_M68HC11_PAGE): New relocs.
(R_M68HC11_RL_JUMP, R_M68HC11_RL_GROUP): New reloc for linker
relaxation.
Nick Clifton