To follow up the thread starting at [1], since all uses of TRAD_SYNOPSIS
have been removed, and all uses of ANSI_SYNOPSIS have been renamed to
SYNOPSIS, we can now warn about the use of these.
[1] https://sourceware.org/ml/newlib/2017/msg01182.html
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Discard QUICKREF sections, rather than writing them to stderr
Discard MATHREF sections, rather than discarding as an error
Pass NOTES sections through to texinfo, rather than discarding as an error
Don't redirect makedoc stderr to .ref file
Remove makedoc output on error
Remove .ref files from CLEANFILES
Regenerate Makefile.ins
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
The unused INTERNAL_DEFINITION, INTERNAL_FUNCTION and INTERNAL commands are
defined in terms of the non-existent built-in 'func'
This causes every single invocation of makedoc to output "Can't find func" three
times, as it parses doc.str.
This is normally un-noticed because makedoc's stderr is redirected to a .ref
file.
Fix these unused command definitions to something with equivalent lack of
effect, but without generating an error.
2015-11-06 Jon Turney <jon.turney@dronecode.org.uk>
* doc/doc.str: Fix INTERNAL_DEFINITION, INTERNAL_FUNCTION and
INTERNAL.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
On 11/08/2015 11:08, Andre Vieira wrote:
> On 10/08/15 14:38, Jon TURNEY wrote:
>> On 07/08/2015 11:13, Andre Vieira wrote:
>>> Building the manuals on Ubuntu LTS 14.04 (64-bit) using pdfTeX
>>> 3.1415926-2.5-1.40.14 (TeX Live 2013/Debian) is failing with the
>>> following error:
>>> "Transcript written on libc.log.
>>> /usr/bin/texi2dvi: pdfetex exited with bad status, quitting."
>>>
>>> libc.log complaints about the following:
>>>
>>> You can't use `@unskip' in vertical mode.
>>>
[...]
>>>
>>> This code has been around for a while, so it might have to do with a
>>> change in pdfTex?
So it seems this problem has been around for a while, and looks like it
is due to a change in texi2dvi in texinfo 5.0 or late 4.x, see [1].
I guess it's not very noticeable since it only occurs when doing 'make
dvi', which doesn't happen by default.
Attached is a different and perhaps cleaner workaround to the one in
that thread.
[1] https://sourceware.org/ml/newlib/2013/msg00057.html
From 4d386b5900b6c68e022004b447faa696be5ff8c7 Mon Sep 17 00:00:00 2001
From: Jon TURNEY <jon.turney@dronecode.org.uk>
Date: Tue, 11 Aug 2015 14:46:39 +0100
Subject: [PATCH] Use '@sp 1' rather than '@*' to workaround a change in
texi2dvi.
Since about TexInfo 5.0, using '@*' immediately after a table causes a 'You
can't use `@unskip' in vertical mode' error.
See https://sourceware.org/ml/newlib/2013/msg00057.html
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
* libc/include/math.h: (llround, llroundf): Declare.
* libm/common/s_llround.c: New file, implementing llround().
* libm/common/sf_llround.c: New file, implementing llroundf().
* libm/common/sf_lround.c: Remove spurious cast in _DOUBLE_IS_32BITS
version of function.
* libm/common/sf_lrint.c: Ditto.
* libm/common/sf_logb.c: Corrected return for subnormal argument
by replacing existing function with a version created from sf_ilogb.c.
* libm/common/s_logb.c: Ditto, except starting point s_ilogb.c. Also
added documentation for logb() and logbf().
* libm/common/s_signbit.c: Add signbit() documentation.
* libm/common/s_log2.c: Update return values to match what w_log2.c has,
since log2 uses log(); add note about being derived instead of direct.
* libm/common/sf_fma.c: Add casts to attempt to get correct results,
as well as comments pointing out problems with the implementation.
* libm/common/s_fma.c: Add fma() and fmaf() documentation.
* libm/common/sf_remquo.c: Incorrect quotient returns for large values
corrected by discarding existing function and replacing with Sun
verion, with some enhancements.
* libm/common/s_remquo.c: Ditto. Add remquo() and remquof()
documentation.
* libm/common/s_fmax.c: Add fmax() and fmaxf() documentation.
* libm/common/s_fmin.c: Add fmin() and fminf() documentation.
* libm/common/s_fdim.c: Return NAN for NAN arg, add fdim() and fdimf()
documentation.
* libm/common/sf_fdim.c: Return NAN for NAN arg, HUGE_VALF for inf arg.
* libm/common/s_trunc.c: Add trunc() and truncf() documentation.
* libm/common/s_rint.c: Add rint() and rintf() documentation.
* libm/common/s_round.c: Add round() and roundf() documentation.
* libm/common/s_scalbn.c: Add scalbln() and scalblnf() documentation.
* libm/common/s_infinity.c: Add infinity() and infinityf()
documentation.
* libm/common/s_lround.c: Add lround(), lroundf(), llround(), and
llroundf() documentation.
* libm/common/s_lrint.c: Add lrint(), lrintf(), llrint(), and llrintf()
documentation.
* libm/common/isgreater.c: New file for documenting math.h function-like
macros isgreater(), isgreaterequal(), isless(), islessequal(),
islessgreater(), and isunordered().
* libm/common/s_isnan.c: Add documentation for function-like macros
fpclassify(), isfinite(), isinf(), isnan(), and isnormal().
* libm/common/s_nearbyint.c: Add nearbyint() and nearbyintf()
documentation.
* libm/common/Makefile.am: Add s_llround.c (src); sf_llround.c (fsrc);
s_fdim.def, s_fma.def, s_fmax.def, s_fmin.def,
s_logb.def, s_lrint.def, s_lround.def, s_nearbyint.def, s_remquo.def,
s_rint.def, s_round.def, s_signbit.def, s_trunc.def, and
isgreater.def (chobj);
re-name all existing chew files (chobj) to match source file base
names (put in underscores), delete all special targets for chew files
(leaving all to be generated by rule).
* libm/common/Makefile.in: regenerate.
* libm/math/w_exp2.c: Add "base 2" to documentation description (and
delete TRAD_SYNOPSIS).
* libm/math/w_gamma.c: Add tgamma() and tgammaf() documentation, along
with some history behind the function names.
* libm/math/math.tex: Add includes for newly-added documentation (see
.def additions to common/Makefile.am and math/Makefile.am in this
ChangeLog list), adjusted existing .def file names to match source file
base names (added underscores); add mention of HUGE_VALF; rename
"Version of library" section to "Error Handling" and add some text
about floating-point exception; added section "Standards Compliance And
Portability".
* libm/math/Makefile.am: Add w_exp2.def (chobj);
re-name all existing chew files (chobj) to match source file base
names, delete all special targets for chew files (leaving all to be
generated by rule).
* libm/math/Makefile.in: regenerated
* doc/makedoc.c: Change silent ignoring of commands < 5 characters
to a failure when reading macro file for commands < 4 characters;
add -v (verbose) option for printing some debugging information;
get rid of spurious translation of "@*" to "*" (no source files used @*,
so no existing doc pages were affected); clean up some compiler
warnings.
* doc/doc.str: add BUGS and SEEALSO sections (to match texi2pod.pl
which has them); Remove ITEM command (redundant with makedoc built-in
"o", not used in any present source file so nothing is lost, anyway).
* HOWTO: New file to hold information for maintainers regarding how
to do things. Initial sections on documentation and ELIX levels.
Jon Turney