A C standard library for sh3eb-elf.
Go to file
Tamar Christina 111b6813fb Fix multido compilation on ARM
The previous multi-build implementation was copying the config.status from the parent
multilib directory when building the different semihosting variants. It did so because
the configuration doesn't change. However when you use a relative path to configure it
turns out that the paths inside the config.status are also relative.

To fix this, the srcdir is adjusted from the initial configuration instead of copying it.

Tested on aarch64-none-elf and arm-none-eabi.

Signed-off-by: Tamar Christina <tamar.christina@arm.com>
2017-10-09 19:03:52 +02:00
config Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
etc Remove spurious empty line in changelog entry. 2016-03-22 10:29:22 +01:00
include Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
libgloss Fix multido compilation on ARM 2017-10-09 19:03:52 +02:00
newlib Fix typo with newlib-long-time_t default value. 2017-10-09 17:55:19 +02:00
texinfo * texinfo/texinfo.tex: Update to version 2009-03-28.05. 2009-04-21 12:36:46 +00:00
winsup cygwin: initialize variable for stack unwinding 2017-10-09 18:58:52 +02:00
.drone.yml Continuous Integration: Add Tea CI build configuration. 2016-06-28 13:42:59 +02:00
.gitattributes Add .gitattributes 2015-03-09 20:53:11 +01:00
.gitignore Add *.swp (Vim swap files) to .gitignore 2015-03-17 12:03:30 +01:00
COPYING 2005-07-14 Kelley Cook <kcook@gcc.gnu.org> 2005-07-14 01:24:56 +00:00
COPYING.LIB Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
COPYING.LIBGLOSS Add Synopsys license for newlib and libgloss 2015-11-12 14:16:32 +01:00
COPYING.NEWLIB Change license to FreeBSD License for RISC-V 2017-08-21 11:08:54 +02:00
COPYING3 * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
COPYING3.LIB * COPYING3: New file. Contains version 3 of the GNU General Public License. 2007-07-17 13:50:23 +00:00
ChangeLog Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
MAINTAINERS MAINTAINERS: clarify policy with config/ (and other top level files) 2012-05-12 03:10:17 +00:00
Makefile.def Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
Makefile.in Add missing OBJCOPY variable to Makefile.in 2016-06-26 17:27:03 +01:00
Makefile.tpl Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
README 19990502 sourceware import 1999-05-03 07:29:06 +00:00
README-maintainer-mode Cleanups after the update to Autoconf 2.64, Automake 1.11. 2009-08-22 17:08:06 +00:00
compile Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
config-ml.in Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
config.guess Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
config.rpath Remove freebsd1 from libtool.m4 macros and config.rpath. 2011-02-13 21:00:08 +00:00
config.sub Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
configure Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
configure.ac Sync with upstream gcc. 2016-06-23 15:54:55 -04:00
depcomp Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
djunpack.bat * djunpack.bat: Use ".." quoting in Sed command, for the sake of 2009-03-27 13:37:09 +00:00
install-sh Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
libtool.m4 Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
ltgcc.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltmain.sh PR target/59788 2014-02-05 13:17:47 +00:00
ltoptions.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
ltsugar.m4 * libtool.m4: Update to libtool 2.2.6. 2008-09-29 15:28:14 +00:00
ltversion.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
lt~obsolete.m4 Sync Libtool from GCC. 2010-01-09 21:11:32 +00:00
makefile.vms 19990502 sourceware import 1999-05-03 07:29:06 +00:00
missing Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
mkdep * mkdep: New file. 1999-08-08 17:46:02 +00:00
mkinstalldirs Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
move-if-change Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00
setup.com 2009-09-01 Tristan Gingold <gingold@adacore.com> 2009-09-01 13:38:26 +00:00
src-release * src-release (do-proto-toplevel): Support subdir-path-prefixed 2013-10-15 20:45:52 +00:00
symlink-tree 2005-07-14 Kelley Cook <kcook@gcc.gnu.org> 2005-07-14 01:24:56 +00:00
ylwrap Sync toplevel with upstream GCC. 2016-03-22 10:25:20 +01:00

README

		   README for GNU development tools

This directory contains various GNU compilers, assemblers, linkers, 
debuggers, etc., plus their support routines, definitions, and documentation.

If you are receiving this as part of a GDB release, see the file gdb/README.
If with a binutils release, see binutils/README;  if with a libg++ release,
see libg++/README, etc.  That'll give you info about this
package -- supported targets, how to use it, how to report bugs, etc.

It is now possible to automatically configure and build a variety of
tools with one command.  To build all of the tools contained herein,
run the ``configure'' script here, e.g.:

	./configure 
	make

To install them (by default in /usr/local/bin, /usr/local/lib, etc),
then do:
	make install

(If the configure script can't determine your type of computer, give it
the name as an argument, for instance ``./configure sun4''.  You can
use the script ``config.sub'' to test whether a name is recognized; if
it is, config.sub translates it to a triplet specifying CPU, vendor,
and OS.)

If you have more than one compiler on your system, it is often best to
explicitly set CC in the environment before running configure, and to
also set CC when running make.  For example (assuming sh/bash/ksh):

	CC=gcc ./configure
	make

A similar example using csh:

	setenv CC gcc
	./configure
	make

Much of the code and documentation enclosed is copyright by
the Free Software Foundation, Inc.  See the file COPYING or
COPYING.LIB in the various directories, for a description of the
GNU General Public License terms under which you can copy the files.

REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info
on where and how to report problems.