PlaneteCasio/libc
1
0
Fork 0
Code Issues 6 Pull requests Releases Wiki Activity
libc/newlib/Makefile.in
Jeff Johnston 959d85b341 This is an attempt to fix the problem described here: 
https://sourceware.org/ml/newlib/2016/msg01139.html
https://gcc.gnu.org/ml/gcc/2016-12/msg00010.html

There is no change if libtool is used.

Some run-time support libraries provided by GCC (e.g. libgomp) use
configure checks to detect certain features, e.g. availability of
thread-local storage.  The configure script generates a test program and
tries to compile and link it.  It should use target libraries and
startfiles of the build tree if available and not random ones from the
installation prefix for this procedure.  The search directories
specified by -B are a bit special, see for_each_path() in gcc.c of the
GCC sources.  First a search is performed on all search paths with the
multilib directory appended (if desired), then a second search is
performed on demand with the base directory only.  For each multilib
there is a "newlib" subdirectory.  This directory is specified by a -B
option for the support libraries.  In order to find the newlib artifacts
(ctr0.o, libc.a, libg.a and libm.a) they must be located in a proper
multilib subdirectory withing the build directory.

Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
2016-12-22 14:50:00 -05:00

1242 lines
41 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@HAVE_CRT0_TRUE@@HAVE_MULTISUBDIR_TRUE@@USE_LIBTOOL_FALSE@am__append_1 = $(BUILD_MULTISUBDIR)/$(CRT0)
@HAVE_MULTISUBDIR_TRUE@@USE_LIBTOOL_FALSE@am__append_2 = $(BUILD_MULTISUBDIR)/libc.a $(BUILD_MULTISUBDIR)/libm.a
subdir = .
DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \
$(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) acconfig.h $(srcdir)/_newlib_version.hin \
$(srcdir)/newlib.hin $(srcdir)/../mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = _newlib_version.h newlib.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" \
"$(DESTDIR)$(toollibdir)"
LIBRARIES = $(toollib_LIBRARIES)
ARFLAGS = cru
libc_a_AR = $(AR) $(ARFLAGS)
libc_a_LIBADD =
libc_a_SOURCES = libc.c
libc_a_OBJECTS = libc.$(OBJEXT)
libm_a_AR = $(AR) $(ARFLAGS)
libm_a_LIBADD =
libm_a_SOURCES = libm.c
libm_a_OBJECTS = libm.$(OBJEXT)
LTLIBRARIES = $(toollib_LTLIBRARIES)
libc_la_LIBADD =
am_libc_la_OBJECTS =
libc_la_OBJECTS = $(am_libc_la_OBJECTS)
libc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libc_la_LDFLAGS) \
$(LDFLAGS) -o $@
@USE_LIBTOOL_TRUE@am_libc_la_rpath = -rpath $(toollibdir)
libm_la_LIBADD =
am_libm_la_OBJECTS =
libm_la_OBJECTS = $(am_libm_la_OBJECTS)
libm_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libm_la_LDFLAGS) \
$(LDFLAGS) -o $@
@USE_LIBTOOL_TRUE@am_libm_la_rpath = -rpath $(toollibdir)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = libc.c libm.c $(libc_la_SOURCES) $(libm_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
DATA = $(noinst_DATA) $(toollib_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = `if test -f $(top_builddir)/../expect/expect; then \
echo $(top_builddir)/../expect/expect; \
else \
echo expect; \
fi`
RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then \
echo $(top_srcdir)/../dejagnu/runtest; \
else \
echo runtest; \
fi`
DIST_SUBDIRS = libc libm doc . @EXTRA_DIRS@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CC_FOR_NEWLIB = @CC_FOR_NEWLIB@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CRT0 = @CRT0@
CRT0_DIR = @CRT0_DIR@
CRT1 = @CRT1@
CRT1_DIR = @CRT1_DIR@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_DIRS = @EXTRA_DIRS@
FGREP = @FGREP@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBM_MACHINE_OBJECTLIST = @LIBM_MACHINE_OBJECTLIST@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MACHINE_OBJECTLIST = @MACHINE_OBJECTLIST@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
NM = @NM@
NMEDIT = @NMEDIT@
NO_INCLUDE_LIST = @NO_INCLUDE_LIST@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSIX_OBJECTLIST = @POSIX_OBJECTLIST@
RANLIB = @RANLIB@
READELF = @READELF@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIGNAL_OBJECTLIST = @SIGNAL_OBJECTLIST@
STDIO64_OBJECTLIST = @STDIO64_OBJECTLIST@
STRIP = @STRIP@
SYSCALL_OBJECTLIST = @SYSCALL_OBJECTLIST@
SYS_MACH_OBJECTLIST = @SYS_MACH_OBJECTLIST@
SYS_OBJECTLIST = @SYS_OBJECTLIST@
UNIX_OBJECTLIST = @UNIX_OBJECTLIST@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
aext = @aext@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libc_cv_cc_loop_to_function = @libc_cv_cc_loop_to_function@
libc_cv_initfinit_array = @libc_cv_initfinit_array@
libdir = @libdir@
libexecdir = @libexecdir@
libm_machine_dir = @libm_machine_dir@
localedir = @localedir@
localstatedir = @localstatedir@
lpfx = @lpfx@
machine_dir = @machine_dir@
mandir = @mandir@
mkdir_p = @mkdir_p@
newlib_basedir = @newlib_basedir@
oext = @oext@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sys_dir = @sys_dir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = cygnus dejagnu
ACLOCAL_AMFLAGS = -I . -I ..
# Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
LIBTOOL_VERSION_INFO = 0:0:0
@NEWLIB_HW_FP_FALSE@MATHDIR = math
# The newlib hardware floating-point routines have been disabled due to
# inaccuracy. If you wish to work on them, you will need to edit the
# configure.in file to re-enable the configuration option. By default,
# the NEWLIB_HW_FP variable will always be false.
@NEWLIB_HW_FP_TRUE@MATHDIR = mathfp
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
"AR_FLAGS=$(AR_FLAGS)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CFLAGS=$(CFLAGS)" \
"CCASFLAGS=$(CCASFLAGS)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"top_toollibdir=$(toollibdir)" \
"AR=$(AR)" \
"AS=$(AS)" \
"CC=$(CC_FOR_NEWLIB)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"NM=$(NM)" \
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"DESTDIR=$(DESTDIR)"
FLAGS_TO_PASS = $(AM_MAKEFLAGS)
@HAVE_DOC_FALSE@DOCDIR =
@HAVE_DOC_TRUE@DOCDIR = doc
SUBDIRS = libc libm \
$(DOCDIR) . $(EXTRA_DIRS)
tooldir = $(exec_prefix)/$(host_alias)
toollibdir = $(tooldir)/lib$(MULTISUBDIR)
AR_FLAGS = rc
noinst_DATA = stmp-targ-include $(am__append_1) $(am__append_2)
@USE_LIBTOOL_TRUE@toollib_LTLIBRARIES = libm.la \
@USE_LIBTOOL_TRUE@ libc.la
@USE_LIBTOOL_FALSE@toollib_LIBRARIES = libm.a \
@USE_LIBTOOL_FALSE@ libc.a
@HAVE_MULTISUBDIR_TRUE@@USE_LIBTOOL_FALSE@BUILD_MULTISUBDIR = $(builddir)$(MULTISUBDIR)
toollib_DATA = $(CRT0) $(CRT1)
# The functions ldexp, frexp and modf are traditionally supplied in
# both libc.a and libm.a. We build them in libm.a and copy them over,
# along with some required supporting routines.
MATHOBJS_IN_LIBC = \
$(lpfx)s_fpclassify.$(oext) $(lpfx)sf_fpclassify.$(oext) \
$(lpfx)s_isinf.$(oext) $(lpfx)sf_isinf.$(oext) \
$(lpfx)s_isnan.$(oext) $(lpfx)sf_isnan.$(oext) \
$(lpfx)s_isinfd.$(oext) $(lpfx)sf_isinff.$(oext) \
$(lpfx)s_isnand.$(oext) $(lpfx)sf_isnanf.$(oext) \
$(lpfx)s_nan.$(oext) $(lpfx)sf_nan.$(oext) \
$(lpfx)s_ldexp.$(oext) $(lpfx)sf_ldexp.$(oext) \
$(lpfx)s_frexp.$(oext) $(lpfx)sf_frexp.$(oext) \
$(lpfx)s_modf.$(oext) \
$(lpfx)sf_modf.$(oext) $(lpfx)s_scalbn.$(oext) \
$(lpfx)sf_scalbn.$(oext) \
$(lpfx)s_finite.$(oext) $(lpfx)sf_finite.$(oext) \
$(lpfx)s_copysign.$(oext) $(lpfx)sf_copysign.$(oext) \
$(lpfx)s_infconst.$(oext)
LIBC_OBJECTLISTS = \
$(POSIX_OBJECTLIST) \
$(SIGNAL_OBJECTLIST) \
$(SYSCALL_OBJECTLIST) \
$(UNIX_OBJECTLIST) \
$(STDIO64_OBJECTLIST) \
libc/argz/objectlist.awk.in \
libc/stdlib/objectlist.awk.in \
libc/time/objectlist.awk.in \
libc/ctype/objectlist.awk.in \
libc/search/objectlist.awk.in \
libc/string/objectlist.awk.in \
libc/locale/objectlist.awk.in \
libc/misc/objectlist.awk.in \
libc/reent/objectlist.awk.in \
libc/errno/objectlist.awk.in \
libc/stdio/objectlist.awk.in \
$(MACHINE_OBJECTLIST) \
$(SYS_OBJECTLIST) \
$(SYS_MACH_OBJECTLIST)
LIBM_OBJECTLISTS = \
libm/$(MATHDIR)/objectlist.awk.in \
libm/common/objectlist.awk.in \
$(LIBM_MACHINE_OBJECTLIST)
libm_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libm-libtool-objectlist
libc_la_LDFLAGS = -version-info $(LIBTOOL_VERSION_INFO) -release newlib -no-undefined -Xcompiler -nostdlib -Xlinker --version-script=$(srcdir)/libc/sys/linux/shared.ld -lgcc -objectlist libc-libtool-objectlist
@USE_LIBTOOL_TRUE@libm_la_SOURCES =
@USE_LIBTOOL_TRUE@libm_la_DEPENDENCIES = libm-libtool-objectlist
@USE_LIBTOOL_TRUE@libc_la_SOURCES =
@USE_LIBTOOL_TRUE@libc_la_DEPENDENCIES = libc-libtool-objectlist
CLEANFILES = stmp-targ-include
CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
MAKEOVERRIDES =
# dejagnu support
RUNTESTFLAGS =
all: _newlib_version.h newlib.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --cygnus Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
_newlib_version.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/_newlib_version.hin $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status _newlib_version.h
$(srcdir)/_newlib_version.hin: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(top_srcdir)/acconfig.h
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
newlib.h: stamp-h2
@if test ! -f $@; then rm -f stamp-h2; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h2; else :; fi
stamp-h2: $(srcdir)/newlib.hin $(top_builddir)/config.status
@rm -f stamp-h2
cd $(top_builddir) && $(SHELL) ./config.status newlib.h
distclean-hdr:
-rm -f _newlib_version.h stamp-h1 newlib.h stamp-h2
install-toollibLIBRARIES: $(toollib_LIBRARIES)
@$(NORMAL_INSTALL)
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \
echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(toollibdir)'"; \
$(INSTALL_DATA) $$list2 "$(DESTDIR)$(toollibdir)" || exit $$?; }
@$(POST_INSTALL)
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
for p in $$list; do \
if test -f $$p; then \
$(am__strip_dir) \
echo " ( cd '$(DESTDIR)$(toollibdir)' && $(RANLIB) $$f )"; \
( cd "$(DESTDIR)$(toollibdir)" && $(RANLIB) $$f ) || exit $$?; \
else :; fi; \
done
uninstall-toollibLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toollib_LIBRARIES)'; test -n "$(toollibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(toollibdir)'; $(am__uninstall_files_from_dir)
clean-toollibLIBRARIES:
-test -z "$(toollib_LIBRARIES)" || rm -f $(toollib_LIBRARIES)
@USE_LIBTOOL_TRUE@libc.a: $(libc_a_OBJECTS) $(libc_a_DEPENDENCIES) $(EXTRA_libc_a_DEPENDENCIES)
@USE_LIBTOOL_TRUE@ -rm -f libc.a
@USE_LIBTOOL_TRUE@ $(libc_a_AR) libc.a $(libc_a_OBJECTS) $(libc_a_LIBADD)
@USE_LIBTOOL_TRUE@ $(RANLIB) libc.a
@USE_LIBTOOL_TRUE@libm.a: $(libm_a_OBJECTS) $(libm_a_DEPENDENCIES) $(EXTRA_libm_a_DEPENDENCIES)
@USE_LIBTOOL_TRUE@ -rm -f libm.a
@USE_LIBTOOL_TRUE@ $(libm_a_AR) libm.a $(libm_a_OBJECTS) $(libm_a_LIBADD)
@USE_LIBTOOL_TRUE@ $(RANLIB) libm.a
install-toollibLTLIBRARIES: $(toollib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toollibdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toollibdir)"; \
}
uninstall-toollibLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(toollib_LTLIBRARIES)'; test -n "$(toollibdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toollibdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toollibdir)/$$f"; \
done
clean-toollibLTLIBRARIES:
-test -z "$(toollib_LTLIBRARIES)" || rm -f $(toollib_LTLIBRARIES)
@list='$(toollib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libc.la: $(libc_la_OBJECTS) $(libc_la_DEPENDENCIES) $(EXTRA_libc_la_DEPENDENCIES)
$(libc_la_LINK) $(am_libc_la_rpath) $(libc_la_OBJECTS) $(libc_la_LIBADD) $(LIBS)
libm.la: $(libm_la_OBJECTS) $(libm_la_DEPENDENCIES) $(EXTRA_libm_la_DEPENDENCIES)
$(libm_la_LINK) $(am_libm_la_rpath) $(libm_la_OBJECTS) $(libm_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-toollibDATA: $(toollib_DATA)
@$(NORMAL_INSTALL)
@list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(toollibdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(toollibdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(toollibdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(toollibdir)" || exit $$?; \
done
uninstall-toollibDATA:
@$(NORMAL_UNINSTALL)
@list='$(toollib_DATA)'; test -n "$(toollibdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(toollibdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) _newlib_version.hin newlib.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) _newlib_version.hin newlib.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) _newlib_version.hin newlib.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) _newlib_version.hin newlib.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distclean-DEJAGNU:
-rm -f site.exp site.bak
-l='$(DEJATOOL)'; for tool in $$l; do \
rm -f $$tool.sum $$tool.log; \
done
check-am:
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(DATA) _newlib_version.h \
newlib.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)" "$(DESTDIR)$(toollibdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-local \
clean-toollibLIBRARIES clean-toollibLTLIBRARIES mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local install-toollibDATA \
install-toollibLIBRARIES install-toollibLTLIBRARIES
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-toollibDATA uninstall-toollibLIBRARIES \
uninstall-toollibLTLIBRARIES
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-DEJAGNU check-am clean \
clean-generic clean-libtool clean-local clean-toollibLIBRARIES \
clean-toollibLTLIBRARIES ctags ctags-recursive distclean \
distclean-DEJAGNU distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
install-toollibDATA install-toollibLIBRARIES \
install-toollibLTLIBRARIES installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-toollibDATA uninstall-toollibLIBRARIES \
uninstall-toollibLTLIBRARIES
# objects listed later in LIBM_OBJECTLISTS will override those listed earlier
@USE_LIBTOOL_TRUE@libm-libtool-objectlist: $(LIBM_OBJECTLISTS)
@USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) | $(AWK) '{ libm[$$1] = $$2 }; END { for (x in libm) printf ("%s\n", libm[x]) }' > $@
# objects listed later in LIBM_OBJECTLISTS and LIBC_OBJECTLISTS will override those listed earlier
@USE_LIBTOOL_TRUE@libc-libtool-objectlist: $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS)
@USE_LIBTOOL_TRUE@ cat $(LIBM_OBJECTLISTS) $(LIBC_OBJECTLISTS) | $(AWK) '{ libc[$$1] = $$2 }; END { for (x in libc) printf ("%s\n", libc[x]) }' > $@
@USE_LIBTOOL_FALSE@libc.a: libc/libc.a libm.a
@USE_LIBTOOL_FALSE@ rm -rf libc.a libg.a tmp
@USE_LIBTOOL_FALSE@ mkdir tmp
@USE_LIBTOOL_FALSE@ cd tmp; \
@USE_LIBTOOL_FALSE@ $(AR) x ../libm.a $(MATHOBJS_IN_LIBC) ; \
@USE_LIBTOOL_FALSE@ $(AR) x ../libc/libc.a ; \
@USE_LIBTOOL_FALSE@ $(AR) $(AR_FLAGS) ../$@ *.o
@USE_LIBTOOL_FALSE@ $(RANLIB) libc.a
@USE_LIBTOOL_FALSE@ ln libc.a libg.a >/dev/null 2>/dev/null || cp libc.a libg.a
@USE_LIBTOOL_FALSE@ rm -rf tmp
@USE_LIBTOOL_FALSE@libc/libc.a: ; @true
@USE_LIBTOOL_FALSE@libm.a: libm/libm.a
@USE_LIBTOOL_FALSE@ rm -f $@
@USE_LIBTOOL_FALSE@ ln $< $@ >/dev/null 2>/dev/null || cp $< $@
@USE_LIBTOOL_FALSE@libm/libm.a: ; @true
@HAVE_MULTISUBDIR_TRUE@$(BUILD_MULTISUBDIR):
@HAVE_MULTISUBDIR_TRUE@ $(MKDIR_P) $@
@HAVE_MULTISUBDIR_TRUE@$(BUILD_MULTISUBDIR)/crt0.o: $(CRT0_DIR)$(CRT0) $(BUILD_MULTISUBDIR)
@HAVE_MULTISUBDIR_TRUE@ rm -f $@
@HAVE_MULTISUBDIR_TRUE@ ln $< $@ >/dev/null 2>/dev/null || cp $< $@
@HAVE_MULTISUBDIR_TRUE@$(BUILD_MULTISUBDIR)/libc.a: libc.a $(BUILD_MULTISUBDIR)
@HAVE_MULTISUBDIR_TRUE@ rm -f $@ $(BUILD_MULTISUBDIR)/libg.a
@HAVE_MULTISUBDIR_TRUE@ ln $< $@ >/dev/null 2>/dev/null || cp $< $@
@HAVE_MULTISUBDIR_TRUE@ ln libg.a $(BUILD_MULTISUBDIR)/libg.a >/dev/null 2>/dev/null || \
@HAVE_MULTISUBDIR_TRUE@ cp libg.a $(BUILD_MULTISUBDIR)/libg.a
@HAVE_MULTISUBDIR_TRUE@$(BUILD_MULTISUBDIR)/libm.a: libm.a $(BUILD_MULTISUBDIR)
@HAVE_MULTISUBDIR_TRUE@ rm -f $@
@HAVE_MULTISUBDIR_TRUE@ ln $< $@ >/dev/null 2>/dev/null || cp $< $@
crt0.o: $(CRT0_DIR)$(CRT0)
rm -f $@
ln $< $@ >/dev/null 2>/dev/null || cp $< $@
$(CRT0_DIR)$(CRT0): ; @true
crt1.o: $(CRT1_DIR)$(CRT1)
rm -f $@
ln $< $@ >/dev/null 2>/dev/null || cp $< $@
$(CRT1_DIR)$(CRT1): ; @true
targ-include:
mkdir $@
targ-include/newlib.h: targ-include/_newlib_version.h
targ-include/sys targ-include/machine targ-include/bits: targ-include/_newlib_version.h targ-include/newlib.h
mkdir $@
targ-include/newlib.h: newlib.h targ-include
cp newlib.h $@
targ-include/_newlib_version.h: _newlib_version.h targ-include
cp _newlib_version.h $@
all-recursive: stmp-targ-include
# The targ-include directory just holds the includes files for the
# particular system and machine we have been configured for. It is
# used while building.
stmp-targ-include: config.status
-rm -rf targ-include stmp-targ-include
$(MAKE) targ-include/sys \
targ-include/machine \
targ-include/bits
-for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/sys/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \
if [ -d $$i ]; then \
for j in $$i/*.h; do \
if [ ! -d targ-include/`basename $$i` ]; then \
mkdir targ-include/`basename $$i`; \
fi; \
cp $$j targ-include/`basename $$i`/`basename $$j`; \
done \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/sys/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/bits/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
-for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
cp $$i targ-include/machine/`basename $$i`; \
else true; fi ; \
done
$(MAKE) targ-include/newlib.h
touch $@
install-data-local: install-toollibLIBRARIES
@USE_LIBTOOL_FALSE@ rm -f $(DESTDIR)$(toollibdir)/libg.a
@USE_LIBTOOL_FALSE@ ln $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a >/dev/null 2>/dev/null || cp $(DESTDIR)$(toollibdir)/libc.a $(DESTDIR)$(toollibdir)/libg.a
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
-if [ -z "$(MULTISUBDIR)" ]; then \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include; \
for i in $(srcdir)/libc/include/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
done; \
$(INSTALL_DATA) newlib.h $(DESTDIR)$(tooldir)/include/newlib.h; \
$(INSTALL_DATA) _newlib_version.h $(DESTDIR)$(tooldir)/include/_newlib_version.h; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/machine; \
for i in $(srcdir)/libc/include/machine/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
done; \
for i in $(srcdir)/libc/machine/$(machine_dir)/machine/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/rpc; \
for i in $(srcdir)/libc/include/rpc/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/rpc/`basename $$i`; \
done; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/sys; \
for i in $(srcdir)/libc/include/sys/*.h; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
done; \
for i in $(srcdir)/libc/machine/$(machine_dir)/sys/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/sys/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/sys/`basename $$i`; \
else true; fi ; \
done ; \
$(mkinstalldirs) $(DESTDIR)$(tooldir)/include/bits; \
for i in $(srcdir)/libc/sys/$(sys_dir)/bits/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/bits/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/machine/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/include/*; do \
if [ -d $$i ]; then \
for j in $$i/*.h; do \
$(INSTALL_DATA) $$j $(DESTDIR)$(tooldir)/include/`basename $$i`/`basename $$j`; \
done ; \
else true; fi ; \
done ; \
for i in $(srcdir)/libc/sys/$(sys_dir)/machine/$(machine_dir)/include/*.h; do \
if [ -f $$i ]; then \
$(INSTALL_DATA) $$i $(DESTDIR)$(tooldir)/include/machine/`basename $$i`; \
else true; fi ; \
done ; \
for i in $(NO_INCLUDE_LIST); do \
if [ -f $(DESTDIR)$(tooldir)/include/$$i ]; then \
rm $(DESTDIR)$(tooldir)/include/$$i; \
else true; fi ; \
done ; \
else true; fi
# Force makedoc to be built before building info files.
info-recursive: doc/makedoc
dvi-recursive: doc/makedoc
doc/makedoc:
cd doc && $(MAKE) all
# Recursive targets for man and install-man
man:
(cd doc && $(MAKE) man-cache) || exit 1; \
for d in $(SUBDIRS); do \
if test "$$d" != "."; then \
(cd $$d && $(MAKE) man) || exit 1; \
fi; \
done
install-man:
for d in $(SUBDIRS); do \
if test "$$d" != "."; then \
(cd $$d && $(MAKE) install-man) || exit 1; \
fi; \
done
# Multilib support.
.PHONY: all-multi check-multi mostlyclean-multi clean-multi distclean-multi \
maintainer-clean-multi
all-recursive: all-multi
check-recursive: check-multi
mostlyclean-recursive: mostlyclean-multi
clean-recursive: clean-multi
distclean-recursive: distclean-multi
maintainer-clean-recursive: maintainer-clean-multi
# The $(MAKE) comments below are to enable parallel building.
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
check-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=check multi-do # $(MAKE)
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
site.exp: Makefile
@echo 'Making a new site.exp file...'
@test ! -f site.bak || rm -f site.bak
@echo '## these variables are automatically generated by make ##' > $@-t
@echo '# Do not edit here. If you wish to override these values' >> $@-t
@echo '# edit the last section' >> $@-t
@echo 'set tool $(DEJATOOL)' >> $@-t
@echo 'set tool_version $(VERSION)' >> $@-t
@echo 'set srcdir $(srcdir)/testsuite' >> $@-t
@echo 'set objdir' `pwd` >> $@-t
@echo 'set tmpdir' `pwd`/testsuite >> $@-t
@echo 'set multibuildtop ./$(MULTIBUILDTOP)' >> $@-t
@echo 'set host_alias $(build_alias)' >> $@-t
@echo 'set host_triplet $(build_triplet)' >> $@-t
@echo 'set target_alias $(host_alias)' >> $@-t
@echo 'set target_triplet $(host_triplet)' >> $@-t
@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
@test ! -f site.exp || mv site.exp site.bak
@mv $@-t site.exp
check-DEJAGNU: site.exp
@if [ -d testsuite ] ; then \
true ; \
else \
mkdir testsuite ; \
fi
@rm -f testsuite/site.exp
@cp site.exp testsuite/site.exp
@rootme=`pwd` ; \
export rootme ; \
srcdir=`cd ${srcdir}; pwd` ; \
export srcdir ; \
EXPECT=`if [ -f $${rootme}/${MULTIBUILDTOP}../../expect/expect ] ; then \
echo $${rootme}/${MULTIBUILDTOP}../../expect/expect ; \
else \
echo expect ; \
fi` ; \
export EXPECT ; \
echo "Found expect: $${EXPECT}" ; \
if [ -f $(top_builddir)/$(MULTIBUILDTOP)../../expect/expect ] ; then \
TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd` ; \
export TCL_LIBRARY ; \
echo "Found TCL library directory: $${TCL_LIBRARY}" ; \
fi ; \
RUNTEST=`if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
echo $${srcdir}/../dejagnu/runtest ; \
else \
echo runtest ; \
fi` ; \
export RUNTEST ; \
echo "Found runtest: $${RUNTEST}" ; \
cd testsuite ; \
if $(SHELL) -c "$$RUNTEST --version" > /dev/null 2>&1 ; then \
$$RUNTEST --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite $(RUNTESTFLAGS) ; \
: ; \
else \
echo "WARNING: could not find \`runtest'" 1>&2 ; \
fi
clean-local:
-rm -rf targ-include newlib.h _newlib_version.h stamp-*
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in a new issue View git blame Copy permalink