Rename "Micro Python" to "MicroPython" in REPL, help, readme's and misc.

This commit is contained in:
Damien George 2015-10-12 00:06:25 +01:00
parent 6206f431cf
commit 0334058fa4
22 changed files with 39 additions and 39 deletions

View File

@ -1,4 +1,4 @@
The Micro Python project was proudly and successfully crowdfunded
The MicroPython project was proudly and successfully crowdfunded
via a Kickstarter campaign which ended on 13th December 2013. The
project was supported by 1923 very generous backers, who pledged
for a total of 2320 pyboards.

View File

@ -41,12 +41,12 @@ Names:
- Use CAPS_WITH_UNDERSCORE for enums and macros.
- When defining a type use underscore_case and put '_t' after it.
Integer types: Micro Python runs on 16, 32, and 64 bit machines, so it's
Integer types: MicroPython runs on 16, 32, and 64 bit machines, so it's
important to use the correctly-sized (and signed) integer types. The
general guidelines are:
- For most cases use mp_int_t for signed and mp_uint_t for unsigned
integer values. These are guaranteed to be machine-word sized and
therefore big enough to hold the value from a Micro Python small-int
therefore big enough to hold the value from a MicroPython small-int
object.
- Use size_t for things that count bytes / sizes of objects.
- You can use int/uint, but remember that they may be 16-bits wide.

View File

@ -8,19 +8,19 @@
[istats-issue-img]: http://issuestats.com/github/micropython/micropython/badge/issue
[istats-issue-repo]: http://issuestats.com/github/micropython/micropython
The Micro Python project
========================
The MicroPython project
=======================
<p align="center">
<img src="https://raw.githubusercontent.com/micropython/micropython/master/logo/upython-with-micro.jpg" alt="MicroPython Logo"/>
</p>
This is the Micro Python project, which aims to put an implementation
This is the MicroPython project, which aims to put an implementation
of Python 3.x on microcontrollers and small embedded systems.
WARNING: this project is in beta stage and is subject to changes of the
code-base, including project-wide name changes and API changes.
Micro Python implements the entire Python 3.4 syntax (including exceptions,
MicroPython implements the entire Python 3.4 syntax (including exceptions,
"with", "yield from", etc.). The following core datatypes are provided:
str (including basic Unicode support), bytes, bytearray, tuple, list, dict,
set, frozenset, array.array, collections.namedtuple, classes and instances.
@ -33,19 +33,19 @@ Python board, the officially supported reference electronic circuit board.
Major components in this repository:
- py/ -- the core Python implementation, including compiler, runtime, and
core library.
- unix/ -- a version of Micro Python that runs on Unix.
- stmhal/ -- a version of Micro Python that runs on the Micro Python board
- unix/ -- a version of MicroPython that runs on Unix.
- stmhal/ -- a version of MicroPython that runs on the MicroPython board
with an STM32F405RG (using ST's Cube HAL drivers).
- minimal/ -- a minimal Micro Python port. Start with this if you want
to port Micro Python to another microcontroller.
- minimal/ -- a minimal MicroPython port. Start with this if you want
to port MicroPython to another microcontroller.
Additional components:
- bare-arm/ -- a bare minimum version of Micro Python for ARM MCUs. Used
- bare-arm/ -- a bare minimum version of MicroPython for ARM MCUs. Used
mostly to control code size.
- teensy/ -- a version of Micro Python that runs on the Teensy 3.1
- teensy/ -- a version of MicroPython that runs on the Teensy 3.1
(preliminary but functional).
- pic16bit/ -- a version of Micro Python for 16-bit PIC microcontrollers.
- cc3200/ -- a version of Micro Python that runs on the CC3200 from TI.
- pic16bit/ -- a version of MicroPython for 16-bit PIC microcontrollers.
- cc3200/ -- a version of MicroPython that runs on the CC3200 from TI.
- esp8266/ -- an experimental port for ESP8266 WiFi modules.
- tests/ -- test framework and test scripts.
- tools/ -- various tools, including the pyboard.py module.

View File

@ -1,6 +1,6 @@
# Build Instructions for the CC3200
Currently the CC3200 port of Micro Python builds under Linux and OSX **but not under Windows**.
Currently the CC3200 port of MicroPython builds under Linux and OSX **but not under Windows**.
The tool chain required for the build can be found at <https://launchpad.net/gcc-arm-embedded>.
@ -25,7 +25,7 @@ make BTARGET=bootloader BTYPE=release BOARD=LAUNCHXL
```
## Regarding old revisions of the CC3200-LAUNCHXL
First silicon (pre-release) revisions of the CC3200 had issues with the ram blocks, and Micro Python cannot run
First silicon (pre-release) revisions of the CC3200 had issues with the ram blocks, and MicroPython cannot run
there. Make sure to use a **v4.1 (or higer) LAUNCHXL board** when trying this port, otherwise it won't work.
## Flashing the CC3200

View File

@ -30,7 +30,7 @@
#include "py/mpconfig.h"
#include "py/obj.h"
STATIC const char help_text[] = "Welcome to Micro Python!\n"
STATIC const char help_text[] = "Welcome to MicroPython!\n"
"For online help please visit http://micropython.org/help/.\n"
"For further help on a specific object, type help(obj)\n";

View File

@ -108,7 +108,7 @@ typedef struct {
DECLARE PRIVATE DATA
******************************************************************************/
static telnet_data_t telnet_data;
static const char* telnet_welcome_msg = "Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
static const char* telnet_welcome_msg = "MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n";
static const char* telnet_request_user = "Login as: ";
static const char* telnet_request_password = "Password: ";
static const char* telnet_invalid_loggin = "\r\nInvalid credentials, try again.\r\n";

View File

@ -1,5 +1,5 @@
Micro Python port to ESP8266
============================
MicroPython port to ESP8266
===========================
This is a highly experimental port of MicroPython for the WiFi modules based
on Espressif ESP8266 chip.
@ -31,7 +31,7 @@ The tool chain required for the build is the OpenSource ESP SDK, which can be
found at <https://github.com/pfalcon/esp-open-sdk>. Clone this repository and
run `make` in its directory to build and install the SDK locally.
Then, to build Micro Python for the ESP8266, just run:
Then, to build MicroPython for the ESP8266, just run:
```bash
$ make
```

View File

@ -30,7 +30,7 @@
#include "py/obj.h"
STATIC const char *help_text =
"Welcome to Micro Python!\n"
"Welcome to MicroPython!\n"
"\n"
"For online help please visit http://micropython.org/help/.\n"
"\n"

View File

@ -150,7 +150,7 @@ static const char fresh_pybcdc_inf[] =
;
static const char fresh_readme_txt[] =
"This is a Micro Python board\r\n"
"This is a MicroPython board\r\n"
"\r\n"
"You can get started right away by writing your Python code in 'main.py'.\r\n"
"\r\n"

View File

@ -87,6 +87,6 @@ ServiceBinary=%12%\usbser.sys
[Strings]
MFGFILENAME="pybcdc"
MFGNAME="Micro Python"
MFGNAME="MicroPython"
DESCRIPTION="Pyboard USB Comm Port"
SERVICE="USB Serial Driver"

View File

@ -206,7 +206,7 @@ STATIC int pyexec_friendly_repl_process_char(int c) {
} else if (ret == CHAR_CTRL_B) {
// reset friendly REPL
mp_hal_stdout_tx_str("\r\n");
mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
mp_hal_stdout_tx_str("Type \"help()\" for more information.\r\n");
goto input_restart;
} else if (ret == CHAR_CTRL_C) {
@ -350,7 +350,7 @@ int pyexec_friendly_repl(void) {
#endif
friendly_repl_reset:
mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME "\r\n");
mp_hal_stdout_tx_str("Type \"help()\" for more information.\r\n");
// to test ctrl-C

View File

@ -38,7 +38,7 @@
#define USBD_VID 0xf055
#define USBD_PID 0x9800
#define USBD_LANGID_STRING 0x409
#define USBD_MANUFACTURER_STRING "Micro Python"
#define USBD_MANUFACTURER_STRING "MicroPython"
#define USBD_PRODUCT_HS_STRING "Pyboard Virtual Comm Port in HS Mode"
#define USBD_SERIALNUMBER_HS_STRING "000000000010"
#define USBD_PRODUCT_FS_STRING "Pyboard Virtual Comm Port in FS Mode"

View File

@ -1,6 +1,6 @@
# Build Instructions for Teensy 3.1
Currently the Teensy 3.1 port of Micro Python builds under Linux and not under Windows.
Currently the Teensy 3.1 port of MicroPython builds under Linux and not under Windows.
The tool chain required for the build can be found at <https://launchpad.net/gcc-arm-embedded>.

View File

@ -29,7 +29,7 @@
#include "py/obj.h"
STATIC const char *help_text =
"Welcome to Micro Python!\n"
"Welcome to MicroPython!\n"
"\n"
"For online help please visit http://micropython.org/help/.\n"
"\n"

View File

@ -1,4 +1,4 @@
Micro Python \.\+ version
MicroPython \.\+ version
>>> # basic REPL tests
>>> print(1)
1

View File

@ -1,4 +1,4 @@
Micro Python \.\+ version
MicroPython \.\+ version
>>> # check REPL allows to continue input
>>> 1 \\\\
... + 2

View File

@ -1,4 +1,4 @@
Micro Python \.\+ version
MicroPython \.\+ version
>>> # REPL tests of GNU-ish readline navigation
>>> # history buffer navigation
>>> 1

View File

@ -1,4 +1,4 @@
Micro Python \.\+ version
MicroPython \.\+ version
>>> # Check for emacs keys in REPL
>>> t = \.\+
>>> t == 2

View File

@ -58,7 +58,7 @@ def run_tests(pyb, test_dict):
return True
def main():
cmd_parser = argparse.ArgumentParser(description='Run tests for Micro Python.')
cmd_parser = argparse.ArgumentParser(description='Run tests for MicroPython.')
cmd_parser.add_argument('--pyboard', action='store_true', help='run the tests on the pyboard')
cmd_parser.add_argument('files', nargs='*', help='input test files')
args = cmd_parser.parse_args()

View File

@ -311,7 +311,7 @@ def run_tests(pyb, tests, args):
return True
def main():
cmd_parser = argparse.ArgumentParser(description='Run tests for Micro Python.')
cmd_parser = argparse.ArgumentParser(description='Run tests for MicroPython.')
cmd_parser.add_argument('--target', default='unix', help='the target platform')
cmd_parser.add_argument('--device', default='/dev/ttyACM0', help='the serial device or the IP address of the pyboard')
cmd_parser.add_argument('-b', '--baudrate', default=115200, help='the baud rate of the serial device')
@ -319,7 +319,7 @@ def main():
cmd_parser.add_argument('-p', '--password', default='python', help='the telnet login password')
cmd_parser.add_argument('-d', '--test-dirs', nargs='*', help='input test directories (if no files given)')
cmd_parser.add_argument('--write-exp', action='store_true', help='save .exp files to run tests w/o CPython')
cmd_parser.add_argument('--emit', default='bytecode', help='Micro Python emitter to use (bytecode or native)')
cmd_parser.add_argument('--emit', default='bytecode', help='MicroPython emitter to use (bytecode or native)')
cmd_parser.add_argument('files', nargs='*', help='input test files')
args = cmd_parser.parse_args()

View File

@ -1,6 +1,6 @@
#!/bin/sh
echo "Micro Python change log"
echo "MicroPython change log"
for t in $(git tag | grep -v v1.0-rc1 | sort -rV); do
echo ''

View File

@ -153,7 +153,7 @@ STATIC char *strjoin(const char *s1, int sep_char, const char *s2) {
#endif
STATIC int do_repl(void) {
mp_hal_stdout_tx_str("Micro Python " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_PY_SYS_PLATFORM " version\n");
mp_hal_stdout_tx_str("MicroPython " MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE "; " MICROPY_PY_SYS_PLATFORM " version\n");
#if MICROPY_USE_READLINE == 1