diff --git a/examples/bluetooth/ble_simple_central.py b/examples/bluetooth/ble_simple_central.py
index f6996366e..f0a3297d3 100644
--- a/examples/bluetooth/ble_simple_central.py
+++ b/examples/bluetooth/ble_simple_central.py
@@ -74,7 +74,7 @@ class BLESimpleCentral:
     def _irq(self, event, data):
         if event == _IRQ_SCAN_RESULT:
             addr_type, addr, adv_type, rssi, adv_data = data
-            if adv_type in (_ADV_IND, _ADV_DIRECT_IND,) and _UART_SERVICE_UUID in decode_services(
+            if adv_type in (_ADV_IND, _ADV_DIRECT_IND) and _UART_SERVICE_UUID in decode_services(
                 adv_data
             ):
                 # Found a potential device, remember it and stop scanning.
@@ -97,14 +97,14 @@ class BLESimpleCentral:
 
         elif event == _IRQ_PERIPHERAL_CONNECT:
             # Connect successful.
-            conn_handle, addr_type, addr, = data
+            conn_handle, addr_type, addr = data
             if addr_type == self._addr_type and addr == self._addr:
                 self._conn_handle = conn_handle
                 self._ble.gattc_discover_services(self._conn_handle)
 
         elif event == _IRQ_PERIPHERAL_DISCONNECT:
             # Disconnect (either initiated by us or the remote end).
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             if conn_handle == self._conn_handle:
                 # If it was initiated by us, it'll already be reset.
                 self._reset()
diff --git a/examples/bluetooth/ble_simple_peripheral.py b/examples/bluetooth/ble_simple_peripheral.py
index 08cd7fa98..f5e766192 100644
--- a/examples/bluetooth/ble_simple_peripheral.py
+++ b/examples/bluetooth/ble_simple_peripheral.py
@@ -23,7 +23,7 @@ _UART_RX = (
 )
 _UART_SERVICE = (
     _UART_UUID,
-    (_UART_TX, _UART_RX,),
+    (_UART_TX, _UART_RX),
 )
 
 
@@ -32,22 +32,20 @@ class BLESimplePeripheral:
         self._ble = ble
         self._ble.active(True)
         self._ble.irq(handler=self._irq)
-        ((self._handle_tx, self._handle_rx,),) = self._ble.gatts_register_services(
-            (_UART_SERVICE,)
-        )
+        ((self._handle_tx, self._handle_rx),) = self._ble.gatts_register_services((_UART_SERVICE,))
         self._connections = set()
         self._write_callback = None
-        self._payload = advertising_payload(name=name, services=[_UART_UUID],)
+        self._payload = advertising_payload(name=name, services=[_UART_UUID])
         self._advertise()
 
     def _irq(self, event, data):
         # Track connections so we can send notifications.
         if event == _IRQ_CENTRAL_CONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             print("New connection", conn_handle)
             self._connections.add(conn_handle)
         elif event == _IRQ_CENTRAL_DISCONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             print("Disconnected", conn_handle)
             self._connections.remove(conn_handle)
             # Start advertising again to allow a new connection.
diff --git a/examples/bluetooth/ble_temperature.py b/examples/bluetooth/ble_temperature.py
index 0e2da2239..001a26b11 100644
--- a/examples/bluetooth/ble_temperature.py
+++ b/examples/bluetooth/ble_temperature.py
@@ -46,15 +46,15 @@ class BLETemperature:
     def _irq(self, event, data):
         # Track connections so we can send notifications.
         if event == _IRQ_CENTRAL_CONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             self._connections.add(conn_handle)
         elif event == _IRQ_CENTRAL_DISCONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             self._connections.remove(conn_handle)
             # Start advertising again to allow a new connection.
             self._advertise()
         elif event == _IRQ_GATTS_INDICATE_DONE:
-            conn_handle, value_handle, status, = data
+            conn_handle, value_handle, status = data
 
     def set_temperature(self, temp_deg_c, notify=False, indicate=False):
         # Data is sint16 in degrees Celsius with a resolution of 0.01 degrees Celsius.
diff --git a/examples/bluetooth/ble_temperature_central.py b/examples/bluetooth/ble_temperature_central.py
index f9db225c1..798303417 100644
--- a/examples/bluetooth/ble_temperature_central.py
+++ b/examples/bluetooth/ble_temperature_central.py
@@ -87,7 +87,7 @@ class BLETemperatureCentral:
     def _irq(self, event, data):
         if event == _IRQ_SCAN_RESULT:
             addr_type, addr, adv_type, rssi, adv_data = data
-            if adv_type in (_ADV_IND, _ADV_DIRECT_IND,) and _ENV_SENSE_UUID in decode_services(
+            if adv_type in (_ADV_IND, _ADV_DIRECT_IND) and _ENV_SENSE_UUID in decode_services(
                 adv_data
             ):
                 # Found a potential device, remember it and stop scanning.
@@ -110,14 +110,14 @@ class BLETemperatureCentral:
 
         elif event == _IRQ_PERIPHERAL_CONNECT:
             # Connect successful.
-            conn_handle, addr_type, addr, = data
+            conn_handle, addr_type, addr = data
             if addr_type == self._addr_type and addr == self._addr:
                 self._conn_handle = conn_handle
                 self._ble.gattc_discover_services(self._conn_handle)
 
         elif event == _IRQ_PERIPHERAL_DISCONNECT:
             # Disconnect (either initiated by us or the remote end).
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             if conn_handle == self._conn_handle:
                 # If it was initiated by us, it'll already be reset.
                 self._reset()
diff --git a/examples/bluetooth/ble_uart_peripheral.py b/examples/bluetooth/ble_uart_peripheral.py
index cc8d589b0..59b35f7e6 100644
--- a/examples/bluetooth/ble_uart_peripheral.py
+++ b/examples/bluetooth/ble_uart_peripheral.py
@@ -20,7 +20,7 @@ _UART_RX = (
 )
 _UART_SERVICE = (
     _UART_UUID,
-    (_UART_TX, _UART_RX,),
+    (_UART_TX, _UART_RX),
 )
 
 # org.bluetooth.characteristic.gap.appearance.xml
@@ -32,9 +32,7 @@ class BLEUART:
         self._ble = ble
         self._ble.active(True)
         self._ble.irq(handler=self._irq)
-        ((self._tx_handle, self._rx_handle,),) = self._ble.gatts_register_services(
-            (_UART_SERVICE,)
-        )
+        ((self._tx_handle, self._rx_handle),) = self._ble.gatts_register_services((_UART_SERVICE,))
         # Increase the size of the rx buffer and enable append mode.
         self._ble.gatts_set_buffer(self._rx_handle, rxbuf, True)
         self._connections = set()
@@ -50,16 +48,16 @@ class BLEUART:
     def _irq(self, event, data):
         # Track connections so we can send notifications.
         if event == _IRQ_CENTRAL_CONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             self._connections.add(conn_handle)
         elif event == _IRQ_CENTRAL_DISCONNECT:
-            conn_handle, _, _, = data
+            conn_handle, _, _ = data
             if conn_handle in self._connections:
                 self._connections.remove(conn_handle)
             # Start advertising again to allow a new connection.
             self._advertise()
         elif event == _IRQ_GATTS_WRITE:
-            conn_handle, value_handle, = data
+            conn_handle, value_handle = data
             if conn_handle in self._connections and value_handle == self._rx_handle:
                 self._rx_buffer += self._ble.gatts_read(self._rx_handle)
                 if self._handler:
diff --git a/extmod/webrepl/manifest.py b/extmod/webrepl/manifest.py
index 6ce7d8546..6eceb3eeb 100644
--- a/extmod/webrepl/manifest.py
+++ b/extmod/webrepl/manifest.py
@@ -1 +1 @@
-freeze(".", ("webrepl.py", "webrepl_setup.py", "websocket_helper.py",))
+freeze(".", ("webrepl.py", "webrepl_setup.py", "websocket_helper.py"))
diff --git a/ports/cc3200/boards/make-pins.py b/ports/cc3200/boards/make-pins.py
index a204561cf..0cf0d5656 100644
--- a/ports/cc3200/boards/make-pins.py
+++ b/ports/cc3200/boards/make-pins.py
@@ -216,7 +216,10 @@ def main():
         default="cc3200_af.csv",
     )
     parser.add_argument(
-        "-b", "--board", dest="board_filename", help="Specifies the board file",
+        "-b",
+        "--board",
+        dest="board_filename",
+        help="Specifies the board file",
     )
     parser.add_argument(
         "-p",
diff --git a/ports/nrf/boards/make-pins.py b/ports/nrf/boards/make-pins.py
index 56c56ae5f..347ed15b2 100644
--- a/ports/nrf/boards/make-pins.py
+++ b/ports/nrf/boards/make-pins.py
@@ -381,7 +381,10 @@ def main():
         default="build/pins_af.py",
     )
     parser.add_argument(
-        "-b", "--board", dest="board_filename", help="Specifies the board file",
+        "-b",
+        "--board",
+        dest="board_filename",
+        help="Specifies the board file",
     )
     parser.add_argument(
         "-p",
diff --git a/ports/stm32/boards/make-pins.py b/ports/stm32/boards/make-pins.py
index 692387f40..a91ed8a2c 100755
--- a/ports/stm32/boards/make-pins.py
+++ b/ports/stm32/boards/make-pins.py
@@ -515,7 +515,10 @@ def main():
         action="store_true",
     )
     parser.add_argument(
-        "-b", "--board", dest="board_filename", help="Specifies the board file",
+        "-b",
+        "--board",
+        dest="board_filename",
+        help="Specifies the board file",
     )
     parser.add_argument(
         "-p",
diff --git a/ports/teensy/make-pins.py b/ports/teensy/make-pins.py
index ddefae852..4e46a8c24 100755
--- a/ports/teensy/make-pins.py
+++ b/ports/teensy/make-pins.py
@@ -370,7 +370,10 @@ def main():
         default="build/pins_af.py",
     )
     parser.add_argument(
-        "-b", "--board", dest="board_filename", help="Specifies the board file",
+        "-b",
+        "--board",
+        dest="board_filename",
+        help="Specifies the board file",
     )
     parser.add_argument(
         "-p",
diff --git a/py/makemoduledefs.py b/py/makemoduledefs.py
index d718da6e0..612f3d29a 100644
--- a/py/makemoduledefs.py
+++ b/py/makemoduledefs.py
@@ -17,7 +17,7 @@ pattern = re.compile(r"[\n;]\s*MP_REGISTER_MODULE\((.*?),\s*(.*?),\s*(.*?)\);",
 
 
 def find_c_file(obj_file, vpath):
-    """ Search vpaths for the c file that matches the provided object_file.
+    """Search vpaths for the c file that matches the provided object_file.
 
     :param str obj_file: object file to find the matching c file for
     :param List[str] vpath: List of base paths, similar to gcc vpath
@@ -36,7 +36,7 @@ def find_c_file(obj_file, vpath):
 
 
 def find_module_registrations(c_file):
-    """ Find any MP_REGISTER_MODULE definitions in the provided c file.
+    """Find any MP_REGISTER_MODULE definitions in the provided c file.
 
     :param str c_file: path to c file to check
     :return: List[(module_name, obj_module, enabled_define)]
@@ -52,7 +52,7 @@ def find_module_registrations(c_file):
 
 
 def generate_module_table_header(modules):
-    """ Generate header with module table entries for builtin modules.
+    """Generate header with module table entries for builtin modules.
 
     :param List[(module_name, obj_module, enabled_define)] modules: module defs
     :return: None
diff --git a/tests/extmod/uasyncio_gather.py b/tests/extmod/uasyncio_gather.py
index 2697a6278..0e2948b07 100644
--- a/tests/extmod/uasyncio_gather.py
+++ b/tests/extmod/uasyncio_gather.py
@@ -34,7 +34,7 @@ async def gather_task():
 
 async def main():
     # Simple gather with return values
-    print(await asyncio.gather(factorial("A", 2), factorial("B", 3), factorial("C", 4),))
+    print(await asyncio.gather(factorial("A", 2), factorial("B", 3), factorial("C", 4)))
 
     # Cancel a multi gather
     # TODO doesn't work, Task should not forward cancellation from gather to sub-task
diff --git a/tests/extmod/uctypes_le.py b/tests/extmod/uctypes_le.py
index 23f2af982..f69da30b6 100644
--- a/tests/extmod/uctypes_le.py
+++ b/tests/extmod/uctypes_le.py
@@ -6,7 +6,7 @@ except ImportError:
 
 desc = {
     "s0": uctypes.UINT16 | 0,
-    "sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
+    "sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
     "arr": (uctypes.ARRAY | 0, uctypes.UINT8 | 2),
     "arr2": (uctypes.ARRAY | 0, 2, {"b": uctypes.UINT8 | 0}),
     "bitf0": uctypes.BFUINT16 | 0 | 0 << uctypes.BF_POS | 8 << uctypes.BF_LEN,
diff --git a/tests/extmod/uctypes_native_le.py b/tests/extmod/uctypes_native_le.py
index c161539c6..7958e5c22 100644
--- a/tests/extmod/uctypes_native_le.py
+++ b/tests/extmod/uctypes_native_le.py
@@ -16,7 +16,7 @@ if sys.byteorder != "little":
 
 desc = {
     "s0": uctypes.UINT16 | 0,
-    "sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
+    "sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
     "arr": (uctypes.ARRAY | 0, uctypes.UINT8 | 2),
     "arr2": (uctypes.ARRAY | 0, 2, {"b": uctypes.UINT8 | 0}),
     "bitf0": uctypes.BFUINT16 | 0 | 0 << uctypes.BF_POS | 8 << uctypes.BF_LEN,
diff --git a/tests/extmod/uctypes_sizeof_native.py b/tests/extmod/uctypes_sizeof_native.py
index 352c191e0..157e554b0 100644
--- a/tests/extmod/uctypes_sizeof_native.py
+++ b/tests/extmod/uctypes_sizeof_native.py
@@ -28,7 +28,7 @@ S5 = {
     "b": uctypes.UINT32 | 4,
     "c": uctypes.UINT8 | 8,
     "d": uctypes.UINT32 | 0,
-    "sub": (4, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
+    "sub": (4, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
 }
 
 assert uctypes.sizeof(S5) == 12
diff --git a/tests/float/cmath_fun.py b/tests/float/cmath_fun.py
index 15b72e7a6..39011733b 100644
--- a/tests/float/cmath_fun.py
+++ b/tests/float/cmath_fun.py
@@ -22,7 +22,7 @@ for r in base_values:
             test_values_non_zero.append(complex(r, -i))
         if r != 0.0 and i != 0.0:
             test_values_non_zero.append(complex(-r, -i))
-test_values = [complex(0.0, 0.0),] + test_values_non_zero
+test_values = [complex(0.0, 0.0)] + test_values_non_zero
 print(test_values)
 
 functions = [
diff --git a/tests/float/math_fun.py b/tests/float/math_fun.py
index 7b6bb8648..0d443a475 100644
--- a/tests/float/math_fun.py
+++ b/tests/float/math_fun.py
@@ -62,10 +62,10 @@ binary_functions = [
         copysign,
         [(23.0, 42.0), (-23.0, 42.0), (23.0, -42.0), (-23.0, -42.0), (1.0, 0.0), (1.0, -0.0)],
     ),
-    ("pow", pow, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
-    ("atan2", atan2, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
-    ("fmod", fmod, ((1.0, 1.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
-    ("ldexp", ldexp, ((1.0, 0), (0.0, 1), (2.0, 2), (3.0, -2), (-3.0, -4),)),
+    ("pow", pow, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
+    ("atan2", atan2, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
+    ("fmod", fmod, ((1.0, 1.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
+    ("ldexp", ldexp, ((1.0, 0), (0.0, 1), (2.0, 2), (3.0, -2), (-3.0, -4))),
     (
         "log",
         log,
diff --git a/tests/float/math_fun_special.py b/tests/float/math_fun_special.py
index c101a7e50..614470c0f 100644
--- a/tests/float/math_fun_special.py
+++ b/tests/float/math_fun_special.py
@@ -40,7 +40,7 @@ functions = [
     ("erf", erf, test_values),
     ("erfc", erfc, test_values),
     ("gamma", gamma, pos_test_values),
-    ("lgamma", lgamma, pos_test_values + [50.0, 100.0,]),
+    ("lgamma", lgamma, pos_test_values + [50.0, 100.0]),
 ]
 
 for function_name, function, test_vals in functions:
diff --git a/tools/mpy_ld.py b/tools/mpy_ld.py
index 32bc176cb..774966a7f 100755
--- a/tools/mpy_ld.py
+++ b/tools/mpy_ld.py
@@ -908,7 +908,7 @@ def build_mpy(env, entry_offset, fmpy, native_qstr_vals, native_qstr_objs):
     # MPY: header
     out.write_bytes(
         bytearray(
-            [ord("M"), MPY_VERSION, env.arch.mpy_feature, MP_SMALL_INT_BITS, QSTR_WINDOW_SIZE,]
+            [ord("M"), MPY_VERSION, env.arch.mpy_feature, MP_SMALL_INT_BITS, QSTR_WINDOW_SIZE]
         )
     )