tools/pydfu.py: Improve DFU reset, and auto-detect USB transfer size.

A DFU device must be in the idle state before it can be programmed, and
this requires either clearing the status or aborting, depending on its
current state.  Code is added to do this.  And the USB transfer size is now
automatically detected so devices with a size less than 2048 bytes work
correctly.
This commit is contained in:
Damien George 2018-11-27 16:19:27 +11:00
parent 5c34c2ff7f
commit 4f25a8b6a4
1 changed files with 41 additions and 6 deletions

View File

@ -14,6 +14,7 @@ See document UM0391 for a dscription of the DFuse file.
from __future__ import print_function
import argparse
import collections
import re
import struct
import sys
@ -56,6 +57,9 @@ _DFU_DESCRIPTOR_TYPE = 0x21
# USB device handle
__dev = None
# Configuration descriptor of the device
__cfg_descr = None
__verbose = None
# USB DFU interface
@ -76,9 +80,18 @@ else:
return usb.util.get_string(dev, index)
def find_dfu_cfg_descr(descr):
if len(descr) == 9 and descr[0] == 9 and descr[1] == _DFU_DESCRIPTOR_TYPE:
nt = collections.namedtuple('CfgDescr',
['bLength', 'bDescriptorType', 'bmAttributes',
'wDetachTimeOut', 'wTransferSize', 'bcdDFUVersion'])
return nt(*struct.unpack('<BBBHHH', bytes(descr)))
return None
def init():
"""Initializes the found DFU device so that we can program it."""
global __dev
global __dev, __cfg_descr
devices = get_dfu_devices(idVendor=__VID, idProduct=__PID)
if not devices:
raise ValueError('No DFU device found')
@ -90,8 +103,32 @@ def init():
# Claim DFU interface
usb.util.claim_interface(__dev, __DFU_INTERFACE)
# Clear status
clr_status()
# Find the DFU configuration descriptor, either in the device or interfaces
__cfg_descr = None
for cfg in __dev.configurations():
__cfg_descr = find_dfu_cfg_descr(cfg.extra_descriptors)
if __cfg_descr:
break
for itf in cfg.interfaces():
__cfg_descr = find_dfu_cfg_descr(itf.extra_descriptors)
if __cfg_descr:
break
# Get device into idle state
for attempt in range(4):
status = get_status()
if status == __DFU_STATE_DFU_IDLE:
break
elif (status == __DFU_STATE_DFU_DOWNLOAD_IDLE
or status == __DFU_STATE_DFU_UPLOAD_IDLE):
abort_request()
else:
clr_status()
def abort_request():
"""Sends an abort request."""
__dev.ctrl_transfer(0x21, __DFU_ABORT, 0, __DFU_INTERFACE, None, __TIMEOUT)
def clr_status():
@ -180,9 +217,7 @@ def write_memory(addr, buf, progress=None, progress_addr=0, progress_size=0):
set_address(xfer_base+xfer_bytes)
# Send DNLOAD with fw data
# the "2048" is the DFU transfer size supported by the ST DFU bootloader
# TODO: this number should be extracted from the USB config descriptor
chunk = min(2048, xfer_total-xfer_bytes)
chunk = min(__cfg_descr.wTransferSize, xfer_total-xfer_bytes)
__dev.ctrl_transfer(0x21, __DFU_DNLOAD, 2, __DFU_INTERFACE,
buf[xfer_bytes:xfer_bytes + chunk], __TIMEOUT)