docs/library/bluetooth: Add initial BLE documentation.

This commit is contained in:
Jim Mussared 2019-10-08 15:55:11 +11:00
parent 76f474129e
commit dc82bee298
2 changed files with 309 additions and 0 deletions

308
docs/library/bluetooth.rst Normal file
View File

@ -0,0 +1,308 @@
:mod:`bluetooth` --- low-level Bluetooth
========================================
.. module:: bluetooth
:synopsis: Low-level Bluetooth radio functionality
This module provides an interface to a Bluetooth controller on a board.
Currently this supports Bluetooth Low Energy (BLE) in Central, Peripheral,
Broadcaster, and Observer roles.
This API is intended to match the low-level Bluetooth protocol and provide
building-blocks for higher-level abstractions such as specific device types.
class BLE
---------
Constructor
-----------
.. class:: BLE()
Returns the singleton BLE object.
Configuration
-------------
.. method:: BLE.active([active])
Optionally changes the active state of the BLE radio, and returns the
current state.
The radio must be made active before using any other methods on this class.
.. method:: BLE.config(name)
Queries a configuration value by *name*. Currently supported values are:
- ``'mac'``: Returns the device MAC address. If a device has a fixed address
(e.g. PYBD) then it will be returned. Otherwise (e.g. ESP32) a random
address will be generated when the BLE interface is made active.
Event Handling
--------------
.. method:: BLE.irq(handler, trigger=0xffff)
Registers a callback for events from the BLE stack. The *handler* takes two
arguments, ``event`` (which will be one of the codes below) and ``data``
(which is an event-specific tuple of values).
The optional *trigger* parameter allows you to set a mask of events that
your program is interested in. The default is all events.
An event handler showing all possible events::
def bt_irq(event, data):
if event == _IRQ_CENTRAL_CONNECT:
# A central has connected to this peripheral.
conn_handle, addr_type, addr = data
elif event == _IRQ_CENTRAL_DISCONNECT:
# A central has disconnected from this peripheral.
conn_handle, addr_type, addr = data
elif event == _IRQ_GATTS_WRITE:
# A central has written to this characteristic or descriptor.
conn_handle, attr_handle = data
elif event == _IRQ_GATTS_READ_REQUEST:
# A central has issued a read. Note: this is a hard IRQ.
# Return None to deny the read.
conn_handle, attr_handle = data
elif event == _IRQ_SCAN_RESULT:
# A single scan result.
addr_type, addr, connectable, rssi, adv_data = data
elif event == _IRQ_SCAN_COMPLETE:
# Scan duration finished or manually stopped.
pass
elif event == _IRQ_PERIPHERAL_CONNECT:
# A successful gap_connect().
conn_handle, addr_type, addr = data
elif event == _IRQ_PERIPHERAL_DISCONNECT:
# Connected peripheral has disconnected.
conn_handle, addr_type, addr = data
elif event == _IRQ_GATTC_SERVICE_RESULT:
# Called for each service found by gattc_discover_services().
conn_handle, start_handle, end_handle, uuid = data
elif event == _IRQ_GATTC_CHARACTERISTIC_RESULT:
# Called for each characteristic found by gattc_discover_services().
conn_handle, def_handle, value_handle, properties, uuid = data
elif event == _IRQ_GATTC_DESCRIPTOR_RESULT:
# Called for each descriptor found by gattc_discover_descriptors().
conn_handle, dsc_handle, uuid = data
elif event == _IRQ_GATTC_READ_RESULT:
# A gattc_read() has completed.
conn_handle, value_handle, char_data = data
elif event == _IRQ_GATTC_WRITE_STATUS:
# A gattc_write() has completed.
conn_handle, value_handle, status = data
elif event == _IRQ_GATTC_NOTIFY:
# A peripheral has sent a notify request.
conn_handle, value_handle, notify_data = data
elif event == _IRQ_GATTC_INDICATE:
# A peripheral has sent an indicate request.
conn_handle, value_handle, notify_data = data
The event codes are::
from micropython import const
_IRQ_CENTRAL_CONNECT = const(1 << 0)
_IRQ_CENTRAL_DISCONNECT = const(1 << 1)
_IRQ_GATTS_WRITE = const(1 << 2)
_IRQ_GATTS_READ_REQUEST = const(1 << 3)
_IRQ_SCAN_RESULT = const(1 << 4)
_IRQ_SCAN_COMPLETE = const(1 << 5)
_IRQ_PERIPHERAL_CONNECT = const(1 << 6)
_IRQ_PERIPHERAL_DISCONNECT = const(1 << 7)
_IRQ_GATTC_SERVICE_RESULT = const(1 << 8)
_IRQ_GATTC_CHARACTERISTIC_RESULT = const(1 << 9)
_IRQ_GATTC_DESCRIPTOR_RESULT = const(1 << 10)
_IRQ_GATTC_READ_RESULT = const(1 << 11)
_IRQ_GATTC_WRITE_STATUS = const(1 << 12)
_IRQ_GATTC_NOTIFY = const(1 << 13)
_IRQ_GATTC_INDICATE = const(1 << 14)
In order to save space in the firmware, these constants are not included on the
:mod:`bluetooth` module. Add the ones that you need from the list above to your
program.
Broadcaster Role (Advertiser)
-----------------------------
.. method:: BLE.gap_advertise(interval_us, adv_data=None, resp_data=None, connectable=True)
Starts advertising at the specified interval (in **micro**\ seconds). This
interval will be rounded down to the nearest 625us. To stop advertising, set
*interval_us* to ``None``.
*adv_data* and *resp_data* can be any type that implements the buffer
protocol (e.g. ``bytes``, ``bytearray``, ``str``). *adv_data* is included
in all broadcasts, and *resp_data* is send in reply to an active scan.
Observer Role (Scanner)
-----------------------
.. method:: BLE.gap_scan(duration_ms, [interval_us], [window_us])
Run a scan operation lasting for the specified duration (in **milli**\ seconds).
To scan indefinitely, set *duration_ms* to ``0``.
To stop scanning, set *duration_ms* to ``None``.
Use *interval_us* and *window_us* to optionally configure the duty cycle.
The scanner will run for *window_us* **micro**\ seconds every *interval_us*
**micro**\ seconds for a total of *duration_ms* **milli**\ seconds. The default
interval and window are 1.28 seconds and 11.25 milliseconds respectively
(background scanning).
For each scan result, the ``_IRQ_SCAN_RESULT`` event will be raised.
When scanning is stopped (either due to the duration finishing or when
explicitly stopped), the ``_IRQ_SCAN_COMPLETE`` event will be raised.
Peripheral Role (GATT Server)
-----------------------------
A BLE peripheral has a set of registered services. Each service may contain
characteristics, which each have a value. Characteristics can also contain
descriptors, which themselves have values.
These values are stored locally and can be read from or written to by a remote
central device. Additionally, a peripheral can "notify" its value to a connected
central via its connection handle.
.. method:: BLE.gatts_register_services(services_definition)
Configures the peripheral with the specified services, replacing any
existing services.
*services_definition* is a list of **services**, where each **service** is a
two-element tuple containing a UUID and a list of **characteristics**.
Each **characteristic** is a two-or-three-element tuple containing a UUID, a
**flags** value, and optionally a list of *descriptors*.
Each **descriptor** is a two-element tuple containing a UUID and a **flags**
value.
The **flags** are a bitwise-OR combination of the
:data:`bluetooth.FLAGS_READ`, :data:`bluetooth.FLAGS_WRITE` and
:data:`bluetooth.FLAGS_NOTIFY` values defined below.
The return value is a list (one element per service) of tuples (each element
is a value handle). Characteristics and descriptor handles are flattened
into the same tuple, in the order that they are defined.
The following example registers two services (Heart Rate, and Nordic UART)::
HR_UUID = bluetooth.UUID(0x180D)
HR_CHAR = (bluetooth.UUID(0x2A37), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
HR_SERVICE = (HR_SERVICE, (HR_CHAR,),)
UART_UUID = bluetooth.UUID('6E400001-B5A3-F393-E0A9-E50E24DCCA9E')
UART_TX = (bluetooth.UUID('6E400003-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
UART_RX = (bluetooth.UUID('6E400002-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_WRITE,)
UART_SERVICE = (UART_UUID, (UART_TX, UART_RX,),)
SERVICES = (HR_SERVICE, UART_SERVICE,)
( (hr,), (tx, rx,), ) = bt.gatts_register_services(SERVICES)
The three value handles (``hr``, ``tx``, ``rx``) can be used with
:meth:`gatts_read <BLE.gatts_read>`, :meth:`gatts_write <BLE.gatts_write>`,
and :meth:`gatts_notify <BLE.gatts_notify>`.
**Note:** Advertising must be stopped before registering services.
.. method:: BLE.gatts_read(value_handle)
Reads the local value for this handle (which has either been written by
:meth:`gatts_write <BLE.gatts_write>` or by a remote central).
.. method:: BLE.gatts_write(value_handle, data)
Writes the local value for this handle, which can be read by a central.
.. method:: BLE.gatts_notify(conn_handle, value_handle, [data])
Notifies a connected central that this value has changed and that it should
issue a read of the current value from this peripheral.
If *data* is specified, then the that value is sent to the central as part
of the notification, avoiding the need for a separate read request. Note
that this will not update the local value stored.
Central Role (GATT Client)
--------------------------
.. method:: BLE.gap_connect(addr_type, addr, scan_duration_ms=2000)
Connect to a peripheral.
On success, the ``_IRQ_PERIPHERAL_CONNECT`` event will be raised.
.. method:: BLE.gap_disconnect(conn_handle)
Disconnect the specified connection handle.
On success, the ``_IRQ_PERIPHERAL_DISCONNECT`` event will be raised.
.. method:: BLE.gattc_discover_services(conn_handle)
Query a connected peripheral for its services.
For each service discovered, the ``_IRQ_GATTC_SERVICE_RESULT`` event will be
raised.
.. method:: BLE.gattc_discover_characteristics(conn_handle, start_handle, end_handle)
Query a connected peripheral for characteristics in the specified range.
For each characteristic discovered, the ``_IRQ_GATTC_CHARACTERISTIC_RESULT``
event will be raised.
.. method:: BLE.gattc_discover_descriptors(conn_handle, start_handle, end_handle)
Query a connected peripheral for descriptors in the specified range.
For each descriptor discovered, the ``_IRQ_GATTC_DESCRIPTOR_RESULT`` event
will be raised.
.. method:: BLE.gattc_read(conn_handle, value_handle)
Issue a remote read to a connected peripheral for the specified
characteristic or descriptor handle.
On success, the ``_IRQ_GATTC_READ_RESULT`` event will be raised.
.. method:: BLE.gattc_write(conn_handle, value_handle, data)
Issue a remote write to a connected peripheral for the specified
characteristic or descriptor handle.
On success, the ``_IRQ_GATTC_WRITE_STATUS`` event will be raised.
class UUID
----------
Constructor
-----------
.. class:: UUID(value)
Creates a UUID instance with the specified **value**.
The **value** can be either:
- A 16-bit integer. e.g. ``0x2908``.
- A 128-bit UUID string. e.g. ``'6E400001-B5A3-F393-E0A9-E50E24DCCA9E'``.
Constants
---------
.. data:: bluetooth.FLAG_READ
bluetooth.FLAG_WRITE
bluetooth.FLAG_NOTIFY

View File

@ -75,6 +75,7 @@ it will fallback to loading the built-in ``ujson`` module.
builtins.rst
array.rst
bluetooth.rst
cmath.rst
gc.rst
math.rst