Commit Graph

329 Commits

Author SHA1 Message Date
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared a52cd5b07d py/obj: Add accessors for type slots and use everywhere.
This is a no-op, but sets the stage for changing the mp_obj_type_t
representation.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:07 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 42587c7870 all: Standardise mp_obj_type_t initialisation.
Remove setting unused slots.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 18:41:29 +10:00
Jim Mussared fb2a57800a all: Simplify buffer protocol to just a "get buffer" callback.
The buffer protocol type only has a single member, and this existing layout
creates problems for the upcoming split/slot-index mp_obj_type_t layout
optimisations.

If we need to make the buffer protocol more sophisticated in the future
either we can rely on the mp_obj_type_t optimisations to just add
additional slots to mp_obj_type_t or re-visit the buffer protocol then.

This change is a no-op in terms of generated code.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 18:40:39 +10:00
Jim Mussared d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared 203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
robert-hh cc0249c936 nrf/modules/machine/uart: Implement uart.flush() and uart.txdone().
Since uart.write() of the nrf port waits until all bytes but the last
one have been sent, uart.flush() and uart.txdone() are implemented
as empty functions to provide API consistency.

uart.flush()

flush() will always return immediately, even if the last byte
may still be sent.

ret = uart.txdone()

uart.txdone() will always return True, even if the last byte
may still be sent.
2022-08-31 00:18:40 +10:00
Jim Mussared 8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Angus Gratton a16a330da5 nrf,stm32: Don't enable debug info by default if LTO is on.
It seems sometimes gcc with LTO will generate otherwise valid assembly
listings that cause 'as' to error out when generating DWARF debug info; see
https://sourceware.org/bugzilla/show_bug.cgi?id=29494

Therefore, don't enable -g by default if LTO is on.

Enabling LTO=1 DEBUG=1 is still possible but may result in random errors
at link time due to 'as' (the error in this case is "Error: unaligned
opcodes detected in executable segment", and the only other easy workaround
is CFLAGS+=-fno-jump-tables which may increase code size significantly).

Follows on from fdfe4eca74
2022-08-15 22:55:34 +10:00
Damien George 787bd99919 nrf/modules/ubluepy: Use mp_obj_str_get_data to extract str data.
Instead of GET_STR_DATA_LEN, which is intended to be a private macro.

Signed-off-by: Damien George <damien@micropython.org>
2022-08-11 23:18:02 +10:00
Jim Mussared be83c08f46 ports: Always append to GIT_SUBMODULES.
Avoids overwriting submodules required by base makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:26 +10:00
Angus Gratton fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
Jim Mussared 092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
robert-hh 2e2fc8f60f nrf/main: Call usb_cdc_init() before executing boot.py and main.py.
Otherwise, there is no USB available when running main.py, and main.py
cannot be interrupted with Ctrl-C.
2022-07-20 17:17:17 +10:00
iabdalkader 768cbea507 nrf/boards/arduino_nano_33_ble_sense: Update deploy instructions. 2022-07-20 17:16:15 +10:00
robert-hh 80339f1a33 ports: Adapt mimxrt, nrf and rp2 ports to work with latest TinyUSB.
rp2: change tud_task() to tud_task_ext().

mimxrt: use lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c instead of
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c.

nrf: add a definition for the changed tud_task().  tud_task() is changed
to tud_task_ext(), and the #define for backward compatibility is in
src/device/usbd.h.

The items I know which are fixed with this version:
- Fix for the SAMD USB lock-up.
- Support the MIMXRT11XX series of MCUs.
- Fix a wrong pin definition for MIMXRT1050_EVKB.

Tested with the MIMXRT boards, rp2 Pico, SAMD boards, nrf board.
2022-07-19 11:27:21 +10:00
David Lechner 8a69c54211 nrf: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers for the nrf port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
robert-hh cca2305211 nrf/drivers/usb: Fix reading of a single USB CDC character. 2022-07-17 00:13:15 +10:00
robert-hh be6f0f3b3b nrf/mpconfigport: Call tud_task() in MICROPY_EVENT_POLL_HOOK.
So that the interrupt character can interrupt a long-running loop, like a
sleep.
2022-07-17 00:12:34 +10:00
robert-hh c985a0b514 nrf/drivers/usb: Add a tud_cdc_rx_cb() callback to check interrupt char. 2022-07-17 00:12:03 +10:00
robert-hh 60539ea162 nrf/drivers/usb: Probe for interrupt char in USB CDC task.
And ensure that the input queue is empty when scheduling the interrupt.
2022-07-17 00:11:14 +10:00
Stuart Langridge 30c7f1790b nrf/drivers/bluetooth: Handle PHY_UPDATE messages, used in Bluetooth 5.
Some devices, such as the LightBlue BTLE app on iOS, try to use Bluetooth 5
when connecting to a device.  This means that they will send a
BLE_GAP_EVT_PHY_UPDATE_REQUEST message to shift to a new physical layer.
If this event isn't handled, LightBlue (and likely other Bluetooth 5.0
central devices) will try to connect and then fail, staying in
"Connecting..." state forever.  This message should be replied to with
sd_ble_gap_phy_update, as documented in
drivers/bluetooth/s140_nrf52_6.1.1/s140_nrf52_6.1.1_API/include/ble_gap.h.

This commit handles the event.  LightBlue can now successfully connect to a
BTLE device on a P10059 nRF52840 dongle running MicroPython.  Two other
related events have logging added in case they are needed in the future.
2022-07-16 23:46:30 +10:00
iabdalkader 262f4a4855 nrf/mpconfigport: Remove obsolete module declarations.
External module declarations are no longer used/needed after the
introduction of MP_REGISTER_MODULE.
2022-07-15 22:54:25 +10:00
iabdalkader 6753c53318 nrf/modmachine: Add machine.idle() function.
This improves the compatibility of the nrf port machine module with common
drivers, by adding a machine.idle() alias for lightsleep.
2022-07-08 12:37:59 +10:00
iabdalkader 5c31a6c023 nrf/boards/arduino_nano_33_ble: Add Arduino Nano 33 BLE sense board. 2022-07-07 23:58:03 +10:00
David Lechner 07cae9178f nrf/Makefile: Drop unused MPY_CROSS and MPY_TOOL variables.
These variables are no longer used in the nrf Makefile and can be removed.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-05 23:51:26 +10:00
iabdalkader 425d8fc0d6 nrf: Enable optional support for Arduino 1200bps touch.
Individual boards must enable it via MICROPY_HW_USB_CDC_1200BPS_TOUCH.
2022-06-23 14:33:40 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
iabdalkader d8f5669532 nrf/modmachine: Add machine.bootloader() and make it customisable. 2022-06-17 13:37:44 +10:00
iabdalkader 921dd94676 nrf/main: Add startup and early-init board hook macros.
Following stm32 for naming and location of the hooks.  Also allow a board
to provide custom .c files to implement code for these hooks.
2022-06-17 13:23:45 +10:00
iabdalkader 99d3a73d59 nrf/modules/uos/microbitfs: Fix MICROPY_MBFS build to use mp_obj_malloc.
Changes introduced in 0e7bfc88c6 missed
changing this call to mp_obj_malloc.
2022-06-11 21:09:58 +10:00
Andrew Leech 494e8ba722 nrf/mpconfigport: Fix MICROPY_VFS IO build support. 2022-06-03 12:39:43 +10:00
Andrew Leech c5878dd1f9 nrf/mpconfigport: Enable extra features as defined by ROM levels.
This commit enables extra features from the ROM levels and further
simplifies mpconfigport.h.  The changes are:

- NRF51822 & BLUETOOTH_SD -> MICROPY_CONFIG_ROM_LEVEL_MINIMUM
    - no changes

- NRF51822 -> MICROPY_CONFIG_ROM_LEVEL_CORE_FEATURES
    - MICROPY_PY_IO = 1

- NRF52832 -> MICROPY_CONFIG_ROM_LEVEL_BASIC_FEATURES
    - MICROPY_PY_IO = 1

- NRF52840, NRF9160 -> MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES
    - MICROPY_COMP_MODULE_CONST = 1
    - MICROPY_COMP_TRIPLE_TUPLE_ASSIGN = 1
    - MICROPY_OPT_MPZ_BITWISE = 1
    - MICROPY_PY_ALL_SPECIAL_METHODS = 1
    - MICROPY_PY_BUILTINS_EXECFILE = 1
    - MICROPY_PY_BUILTINS_SLICE_ATTRS = 1
    - MICROPY_PY_BUILTINS_STR_CENTER = 1
    - MICROPY_PY_BUILTINS_STR_PARTITION = 1
    - MICROPY_PY_BUILTINS_STR_SPLITLINES = 1
    - MICROPY_PY_CMATH = 1
    - MICROPY_PY_COLLECTIONS_ORDEREDDICT = 1
    - MICROPY_PY_FRAMEBUF = 1
    - MICROPY_PY_IO = 1
    - MICROPY_PY_MATH_SPECIAL_FUNCTIONS = 1
    - MICROPY_PY_SYS_STDIO_BUFFER = 1
    - MICROPY_PY_UCTYPES = 1
    - MICROPY_PY_UHEAPQ = 1
    - MICROPY_PY_UJSON = 1
    - MICROPY_PY_URE = 1
    - MICROPY_PY_UZLIB = 1
    - MICROPY_REPL_EMACS_KEYS = 1
2022-06-03 12:37:12 +10:00
Andrew Leech 13f5d38f2e nrf/mpconfigport: Set MICROPY_CONFIG_ROM_LEVEL defines for each MCU.
This commit is a no-op change to simplify existing config.
2022-06-03 12:36:40 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George 6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George 5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared f67ac90fa9 nrf: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:57:09 +10:00
Jim Mussared 4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Andrew Leech 303e222f70 nrf/modules: Include uasyncio in default board manifest. 2022-03-30 15:37:49 +11:00
Andrew Leech f92da1adc4 nrf/drivers/usb: Fix MP_STREAM_POLL_RD support on USB CDC.
This gets ipoll working on USB CDC stdin.
2022-03-30 15:34:25 +11:00
Andrew Leech dc8b43adc7 nrf/drivers/usb: Fix background events/scheduling while at USB REPL. 2022-03-30 15:33:29 +11:00
Damien George fbd47fc46c ports: Consolidate inclusion of umachine module in built-ins.
The inclusion of `umachine` in the list of built-in modules is now done
centrally in py/objmodule.c.  Enabling MICROPY_PY_MACHINE will include this
module.

As part of this, all ports now have `umachine` as the core module name
(previously some had only `machine` as the name).

Signed-off-by: Damien George <damien@micropython.org>
2022-02-03 10:08:54 +11:00
Damien George df3f59ca4b ports: Update board.json files to link to new board images.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00