Commit Graph

170 Commits

Author SHA1 Message Date
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot.
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00
Jim Mussared 6da41b5900 py/obj: Merge getiter and iternext mp_obj_type_t slots.
The goal here is to remove a slot (making way to turn make_new into a slot)
as well as reduce code size by the ~40 references to mp_identity_getiter
and mp_stream_unbuffered_iter.

This introduces two new type flags:
- MP_TYPE_FLAG_ITER_IS_ITERNEXT: This means that the "iter" slot in the
  type is "iternext", and should use the identity getiter.
- MP_TYPE_FLAG_ITER_IS_CUSTOM: This means that the "iter" slot is a pointer
  to a mp_getiter_iternext_custom_t instance, which then defines both
  getiter and iternext.

And a third flag that is the OR of both, MP_TYPE_FLAG_ITER_IS_STREAM: This
means that the type should use the identity getiter, and
mp_stream_unbuffered_iter as iternext.

Finally, MP_TYPE_FLAG_ITER_IS_GETITER is defined as a no-op flag to give
the default case where "iter" is "getiter".

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:13 +10:00
Jim Mussared 9dce82776d all: Remove unnecessary locals_dict cast.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
Jim Mussared 662b9761b3 all: Make all mp_obj_type_t defs use MP_DEFINE_CONST_OBJ_TYPE.
In preparation for upcoming rework of mp_obj_type_t layout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:01 +10:00
robert-hh 6472348c1b mimxrt/machine_uart: Fix a bug in UART.write().
Causing an incomplete send if the data size was longer than the buffer
size.
2022-09-13 18:35:48 +10:00
robert-hh 443fbcf81c mimxrt/machine_uart: Set the UART ioctl write poll flag properly.
It was always set to True.  The change adds a check to the tx status flag
which is set when all data is transferred.
2022-09-13 18:35:48 +10:00
robert-hh 0f048a5a2a mimxrt/machine_spi: Allow a setting of -1 for cs in the constructor.
In that case, no Pin will be configured for the CS signal, even if it is
internally still generated.  That setting allows to use any pin for CS,
which then must be controlled by the Python script.

Also make the default cs=-1 to match other ports (software CS).
2022-09-13 18:35:48 +10:00
robert-hh 8e54225140 mimxrt: Format the firmware image to match the new teensy loader.
The new teensy loader keeps the file system under certain conditions:
- The file size is properly set in the file header.
- The header version is 4.3

These changes are implemented here, requiring a backport of
fsl_flexspi_nor_boot.c.  There is still a problem with the command line
version of the teensy loader, which fails on the first attempt.  At the
second attempt it works.  The GUI version of the teensy loader is fine.
2022-09-13 18:35:48 +10:00
robert-hh 65ce7d7ade mimxrt/machine_uart: Drop a few commented lines about TX ring buffer. 2022-09-13 18:35:48 +10:00
Jim Mussared d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared 203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
robert-hh 49e17c8bb0 mimxrt/machine_uart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters have been sent.To avoid a
permanent lock, a timeout applies depending on the size of txbuf
and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.
2022-08-31 00:18:21 +10:00
Jim Mussared 8a0ee5a5c0 py/objstr: Split mp_obj_str_from_vstr into bytes/str versions.
Previously the desired output type was specified.  Now make the type part
of the function name.  Because this function is used in a few places this
saves code size due to smaller call-site.

This makes `mp_obj_new_str_type_from_vstr` a private function of objstr.c
(which is almost the only place where the output type isn't a compile-time
constant).

This saves ~140 bytes on PYBV11.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-26 16:43:55 +10:00
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option.
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
2022-08-18 11:54:17 +10:00
Jim Mussared 28aaab9590 py/objstr: Add hex/fromhex to bytes/memoryview/bytearray.
These were added in Python 3.5.

Enabled via MICROPY_PY_BUILTINS_BYTES_HEX, and enabled by default for all
ports that currently have ubinascii.

Rework ubinascii to use the implementation of these methods.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-12 12:44:30 +10:00
Jim Mussared be83c08f46 ports: Always append to GIT_SUBMODULES.
Avoids overwriting submodules required by base makefiles.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-08-03 00:05:26 +10:00
Angus Gratton fdfe4eca74 ports: Always include debug information in the ELF.
For bare metal ARM & xtensa targets, passing -g will make the ELF file
larger but doesn't change the binary size.  However, this means tools like
gdb, addr2line, etc can extract source-level information from the ELF.

Also standardise -ggdb to -g, these produce the exact same ELF file on
arm-none-eabi-gcc and will use DWARF format for all these ports.
2022-07-29 11:24:00 +10:00
Jim Mussared 092784da19 ports: Remove unused mp_type_{fileio/textio} macros in mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:07:22 +10:00
Tim Gates f736afb577 drivers,ports: Fix a few typos in comments.
Fixes:
- Should read `definitions` rather than `defintions`.
- Should read `resolution` rather than `resoultion`.
- Should read `inefficient` rather than `inefficent`.
- Should read `closed` rather than `closded`.

Signed-off-by: Tim Gates <tim.gates@iress.com>
2022-07-23 23:24:24 +10:00
robert-hh 80339f1a33 ports: Adapt mimxrt, nrf and rp2 ports to work with latest TinyUSB.
rp2: change tud_task() to tud_task_ext().

mimxrt: use lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c instead of
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c.

nrf: add a definition for the changed tud_task().  tud_task() is changed
to tud_task_ext(), and the #define for backward compatibility is in
src/device/usbd.h.

The items I know which are fixed with this version:
- Fix for the SAMD USB lock-up.
- Support the MIMXRT11XX series of MCUs.
- Fix a wrong pin definition for MIMXRT1050_EVKB.

Tested with the MIMXRT boards, rp2 Pico, SAMD boards, nrf board.
2022-07-19 11:27:21 +10:00
Damien George b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
David Lechner 7e4b205cb0 py/mpstate: Drop MICROPY_PORT_ROOT_POINTERS from mp_state_vm_t.
All in-tree uses of MICROPY_PORT_ROOT_POINTERS have been replaced with
MP_REGISTER_ROOT_POINTER(), so now we can remove both
MICROPY_PORT_ROOT_POINTERS and MICROPY_BOARD_ROOT_POINTERS from the code
and remaining config files.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:51:16 +10:00
David Lechner a316a8fdb3 mimxrt: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register all port-specific root
pointers in the mimxrt port.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:34 +10:00
David Lechner a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner 81dbea1ce3 shared/readline: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register the readline_history root
pointer array used by shared/readline.c and removes the registration from
all mpconfigport.h files.

This also required adding a new MICROPY_READLINE_HISTORY_SIZE config option
since not all ports used the same sized array.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:48:49 +10:00
Philipp Ebensberger 4ce1adab31 mimxrt/boards: Remove conditional assignment of flash type/size.
Removes conditional assignment because respective variables should only be
set in board makefile fragments.  Hence no conditional assignment needed.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger 434974ec77 mimxrt/Makefile: Fix some minor formatting inconsistencies. 2022-06-24 17:58:27 +10:00
Philipp Ebensberger c957c76f4d mimxrt/Makefile: Rework floating point config.
Reworks source file and compile flags selection for floating point support.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger bec0524dbf mimxrt/Makefile: Rework board flash type handling.
Reworks handling and configuration of different board flash types in the
Makefile, linker scripts and board makefile fragments.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger 84339aa8ec mimxrt/Makefile: Modify handling of SDCARD option.
Removes separate `if` case in Makefile for setting SDCARD option define.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger b1aec393b1 mimxrt/Makefile: Modify handling of SDRAM option.
Replaces preprocessor macro for SDRAM option from #ifdef to #if in order to
allow always setting the define `MICROPY_HW_SDRAM_AVAIL` just with the
appropriate value 0/1.  This eliminates one `if` in the Makefile.
2022-06-24 17:58:27 +10:00
Philipp Ebensberger fbc50196ad mimxrt/Makefile: Refactor Makefile and divide it into sections.
Reworks grouping of Makefile variables and reorders variable values in
alphabetic order.
2022-06-24 17:58:25 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George f5769698e5 extmod/modlwip: Clean up inclusion of modlwip in build process.
The following changes are made:

- Guard entire file with MICROPY_PY_LWIP, so it can be included in the
  build while still being disabled (for consistency with other extmod
  modules).

- Add modlwip.c to list of all extmod source in py/py.mk and
  extmod/extmod.cmake so all ports can easily use it.

- Move generic modlwip GIT_SUBMODULES build configuration code from
  ports/rp2/CMakeLists.txt to extmod/extmod.cmake, so it can be reused by
  other ports.

- Remove now unnecessary inclusion of modlwip.c in EXTMOD_SRC_C in esp8266
  port, and in SRC_QSTR in mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
robert-hh 5cc2dd4f5d mimxrt/machine_uart: Fix an inconsistency for UART.init() arg handling.
With keyword arguments only or just a single non-keyword argument,
UART.init() did not perform the settings.
2022-06-07 18:21:46 +10:00
robert-hh a0432ed9cb mimxrt: Update port to work with new nxp_driver v2.10.
The nxp_driver v2.10 allows for/requires some changes to the code:

- Remove some part of pwm_backlog.*, which is provided by the lib now.
- Change eth.c: the newer versions have additional parameters of the
  library versions.
- Change sdcard.c: use TransferBlocking instead of TransferNonblocking.
- Add some support for the MIMXRT1176 device.
- Set the clocks for UART, I2C, Timer.
- Integrate the I2S module and fix a rebase error.
- Use blocking transfer only for SPI.  It's faster and interferes less with
  other modules.
- Use the clock_config.c files of library v2.8.5.  The mimxrt files keeps
  the clock_config.c files from Verson 2.8.5.  With clock_config.c from
  v2.10, the boards do not work.  Refactoring of the clock set-up is on the
  to-do list.
- Enable expiry timers for UART, I2C and SPI, avoiding a stall in library
  code.
- The clock_config.* files are moved from the board-specific directories to
  the boards directory and given a MCU related name.
2022-06-03 10:48:49 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Jared Hancock 2f4aca0381 mimxrt/mphalport: Fix strict aliasing error with unique id. 2022-06-02 12:50:14 +10:00
robert-hh 1df7678674 mimxrt/boards: Extend the deploy_teensy.md instructions. 2022-05-27 13:23:46 +10:00
robert-hh c7accf7666 mimxrt/boards/OLIMEX_RT1010: Document the initial deploy procedure.
The procedure given here will work whether or not the DevKit motherboard is
used and is equipped with the support MCU.  It is laborious but works.
2022-05-27 13:23:46 +10:00
Damien George 6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Jim Mussared 7d79fd7e8b mimxrt: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared 4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George da31ad7aad mimxrt/mbedtls: Use core-provided tracked alloc instead of custom funcs.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
robert-hh ca41eda281 mimxrt/mphalport: Fix USB CDC RX handling to not block when unprocessed.
Changes in this commit:
- Fix USB CDC RX handling to not block when unprocessed.  The fix follows
  5873390226.
- Fix dupterm rx.
- Remove some obsolete lines.
2022-04-11 12:30:59 +10:00
robert-hh 752fe75910 mimxrt/machine_spi: Improve handling of busy SPI peripheral.
This commit changes the method of waiting for SPI being not busy.  Instead
of the FIFO size, the TransferBusyFlag is probed.

Also, raise an error if the transfer failed.
2022-04-11 12:27:49 +10:00
robert-hh b70b8ce3e4 mimxrt/machine_rtc: Start RTC at boot and set datetime if not set.
Changes in this commit:
- Start the RTC Timer at system boot.  Otherwise time.time() will advance
  only if an RTC() object was created.
- Set the time to a more recent date than Jan 1, 1970, if not set.  That is
  2013/10/14, 19:53:11, MicroPython's first commit.
- Compensate an underflow in in timeutils_seconds_since_2000(), called by
  time.time(), if the time is set to a pre-2000 date.
2022-04-11 12:25:23 +10:00
robert-hh e3030f7436 mimxrt/modules: Append /flash/lib to the default sys.path. 2022-04-11 12:25:15 +10:00