array of undefined size, to avoid problems when compiled with
-msda=4.
* v850/sbrk.c (_sbrk): Change heap_start to be an array of
undefined size, to avoid problems when compiled with -msda=4.
Merge upstream change.
* libtool.m4 (_LT_COMPILER_PIC): Add -fPIC to GCC and GXX for AIX.
* configure.ac: Add target-libquadmath to noconfigdirs for AIX.
Add libgomp*.o to compare_exclusions for AIX.
* configure: Regenerate.
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
bfd/
* bfd-in2.h: Regenerated.
* elf64-aarch64.c
(elf64_aarch64_howto_table): Add R_AARCH64_GOT_LD_PREL19 reloc to HOWTO.
(elf64_aarch64_reloc_map): Add reloc entry.
(aarch64_resolve_relocation): Likewise.
(bfd_elf_aarch64_put_addend): Likewise.
(aarch64_reloc_got_type): Likewise.
(elf64_aarch64_final_link_relocate): Likewise.
(lf64_aarch64_check_relocs): Likewise.
(elf64_aarch64_check_relocs): New case for R_AARCH64_ADR_PREL_LO21
reloc.
* libbfd.h: Regenerated.
* reloc.c (R_AARCH64_GOT_LD_PREL19): New reloc.
gas/
* config/tc-aarch64.c
(reloc_table): Add reloc to table entry.
(parse_address_main): Add support for #:<reloc_op>:<symbol>.
(parse_operands): Check for unused reloc.
(md_apply_fix): New case for reloc.
(aarch64_force_relocation): Likewise.
gas/testsuite
* gas/aarch64/reloc-insn.d
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add expected asm for new reloc test.
* gas/aarch64/reloc-insn.s
(BFD_RELOC_AARCH64_GOT_LD_PREL19): Add test for reloc.
include/
* elf/aarch64.h (R_AARCH64_GOT_LD_PREL19): New reloc.
ld/testsuite
* ld-aarch64/aarch64-elf.exp: New reloc tests.
* ld-aarch64/emit-relocs-309-low-bad.d: New file. Expected asm for test
failure (lower bound overflow).
* ld-aarch64/emit-relocs-309-low.d: New file. Expected asm for test
success (lower bound).
* ld-aarch64/emit-relocs-309-up-bad.d: New file. Expected asm for test
failure (upper bound overflow).
* ld-aarch64/emit-relocs-309-up.d: New file. Expected asm for test
success (upper bound).
* ld-aarch64/emit-relocs-309.s: New file. Asm for new reloc tests.
bfd/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* cpu-ia64-opc.c (ins_cnt6a): New function.
(ext_cnt6a): Ditto.
(ins_strd5b): Ditto.
(ext_strd5b): Ditto.
(elf64_ia64_operands): Add new operand types.
gas/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* config/tc-ia64.c (reg_symbol): Add a new register.
(indirect_reg): Ditto.
(pseudo_func): Add new symbolic constants.
(operand_match): Add new operand types recognition.
(operand_insn): Add new register recognition.
(md_begin): Add new register definition.
(specify_resource): Add new register recognition.
gas/testsuite/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* gas/testsuite/gas/ia64/psn.d: New file.
* gas/testsuite/gas/ia64/psn.s: New file.
* gas/testsuite/gas/ia64/ia64.exp: Add new testcase.
* gas/testsuite/gas/ia64/opc-i.d: Fixed failing tests.
* gas/testsuite/gas/ia64/opc-m.d: Ditto.
include/opcode/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64.h (ia64_opnd): Add new operand types.
opcodes/
2012-09-04 Sergey A. Guriev <sergey.a.guriev@intel.com>
* ia64-asmtab.h (completer_index): Extend bitfield to full uint.
* ia64-gen.c: Promote completer index type to longlong.
(irf_operand): Add new register recognition.
(in_iclass_mov_x): Add an entry for the new mov_* instruction type.
(lookup_specifier): Add new resource recognition.
(insert_bit_table_ent): Relax abort condition according to the
changed completer index type.
(print_dis_table): Fix printf format for completer index.
* ia64-ic.tbl: Add a new instruction class.
* ia64-opc-i.c (ia64_opcodes_i): Define new I-instructions.
* ia64-opc-m.c (ia64_opcodes_m): Define new M-instructions.
* ia64-opc.h: Define short names for new operand types.
* ia64-raw.tbl: Add new RAW resource for DAHR register.
* ia64-waw.tbl: Add new WAW resource for DAHR register.
* ia64-asmtab.c: Regenerate.
2012-08-14 Diego Novillo <dnovillo@google.com>
Merge from cxx-conversion branch.
* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
POSTSTAGE1_CONFIGURE_FLAGS.
* Makefile.in: Regenerate.
* configure.ac (ENABLE_BUILD_WITH_CXX): Remove. Update all users.
Force C++ when bootstrapping.
* configure: Regenerate.
2012-07-06 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Pass $(HOST_GMPINC) and $(HOST_ISLINC)
as CPPFLAGS, pass path to built gmp as LDFLAGS, always use
--with-gmp=system.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-06 Richard Guenther <rguenther@suse.de>
* configure.ac (extra_isl_gmp_configure_flags): Initialize and subst.
* Makefile.def (isl): Use extra_isl_gmp_configure_flags and
supply V=1 as extra_make_flags.
* configure: Regenerated.
* Makefile.in: Likewise.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makfile.def (isl): Remove not necessary extra_exports and
extra_make_flags.
(cloog): Use $$CPPFLAGS instead of ${CPPFLAGS}.
* Makefile.in: Regenerated.
2012-07-03 Richard Guenther <rguenther@suse.de>
* Makefile.def (cloog): Add V=1 to extra_make_flags.
* configure.ac: If either the ISL or the CLooG check failed
do not try to build in-tree versions.
* Makefile.in: Regenerated.
* configure: Regenerated.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* Makefile.def: Add ISL host module, remove PPL host module.
Adjust ClooG host module to use the proper ISL.
* Makefile.tpl: Pass ISL include flags instead of PPL ones.
* configure.ac: Include config/isl.m4. Add ISL host library,
remove PPL. Remove PPL configury, add ISL configury, adjust
ClooG configury.
* Makefile.in: Regenerated.
* configure: Likewise.
2012-07-02 Richard Guenther <rguenther@suse.de>
Merge from graphite branch
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Remove support for CLooG-ppl and CLooG-parma,
both cloog.org and legacy versions. The only supported version will
be CLooG with the isl backend.
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* configure.ac: Require cloog isl 0.17.0
2011-07-21 Tobias Grosser <tobias@grosser.es>
* configure: Regenerated.
* config/cloog.m4: Do not define CLOOG_ORG
2012-06-29 Steven Bosscher <steven@gcc.gnu.org>
* configure.ac: Skip C if explicitly selected.
* configure: Regenerate.
2012-06-28 Christophe Lyon <christophe.lyon@st.com>
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Make sure
they contain -O2.
* configure: Regenerate.
2012-06-20 Jason Merrill <jason@redhat.com>
* Makefile.tpl (check-target-libgomp-c++): New.
(check-target-libitm-c++): New.
* Makefile.def (c++): Add them.
* Makefile.in: Regenerate.
2012-05-16 Olivier Hainque <hainque@adacore.com>
* Makefile.tpl (gcc-no-fixedincludes): Rename into ...
(gcc-install-no-fixedincludes): Now forwarder to local target in gcc/
(install-no-fixedincludes): Adjust accordingly.
* Makefile.in: Regenerate.
2012-05-09 Nick Clifton <nickc@redhat.com>
Paul Smith <psmith@gnu.org>
PR bootstrap/50461
* configure.ac (mpfr-dir): When using in-tree MPFR sources
allow for the fact that from release v3.1.0 of MPFR the source
files were moved into a src sub-directory.
* configure: Regenerate.
2012-05-07 Janne Blomqvist <jb@gcc.gnu.org>
* configure.ac: Bump minimum MPFR version to 2.4.0.
* configure: Regenerated.
2012-05-01 Richard Henderson <rth@redhat.com>
* Makefile.def (libatomic): New target_module.
* configure.ac (target_libraries): Add libatomic.
(noconfigdirs): Check if libatomic is supported.
* Makefile.in, configure: Rebuild.
config/
2012-08-26 Art Haas <ahaas@impactweather.com>
* cloog.m4 (CLOOG_INIT_FLAGS): Use = instead of == in test.
2012-07-04 Tristan Gingold <gingold@adacore.com>
* isl.m4 (ISL_CHECK_VERSION): Set to yes if cross-compiling.
Fix comments.
2012-07-03 Richard Guenther <rguenther@suse.de>
* cloog.m4: Remove debugging print.
2012-07-03 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* isl.m4 (ISL_CHECK_VERSION): Add -lisl to LIBS, not LDFLAGS.
2012-07-02 Richard Guenther <rguenther@suse.de>
* isl.m4 (_ISL_CHECK_CT_PROG): Omit main function header/footer.
Fix version test.
2012-07-02 Richard Guenther <rguenther@suse.de>
Michael Matz <matz@suse.de>
Tobias Grosser <tobias@grosser.es>
Sebastian Pop <sebpop@gmail.com>
* cloog.m4: Set up to work against ISL only.
* isl.m4: New file.
segments.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* gold.cc (queue_middle_tasks): Call layout again when unique
segments for sections is desired.
* layout.cc (Layout::Layout): Initialize new members.
(Layout::get_output_section_flags): New function.
(Layout::choose_output_section): Call get_output_section_flags.
(Layout::layout): Make output section for mapping to a unique segment.
(Layout::insert_section_segment_map): New function.
(Layout::attach_allocated_section_to_segment): Make unique segment for
output sections marked so.
(Layout::segment_precedes): Check for unique segments when sorting.
* layout.h (Layout::Unique_segment_info): New struct.
(Layout::Section_segment_map): New typedef.
(Layout::insert_section_segment_map): New function.
(Layout::get_output_section_flags): New function.
(Layout::is_unique_segment_for_sections_specified): New function.
(Layout::set_unique_segment_for_sections_specified): New function.
(Layout::unique_segment_for_sections_specified_): New member.
(Layout::section_segment_map_): New member.
* object.cc (Sized_relobj_file<size, big_endian>::do_layout):
Rename is_gc_pass_one to is_pass_one.
Rename is_gc_pass_two to is_pass_two.
Rename is_gc_or_icf to is_two_pass.
Check for which pass based on whether symbols data is present.
Make it two pass when unique segments for sections is desired.
* output.cc (Output_section::Output_section): Initialize new
members.
* output.h (Output_section::is_unique_segment): New function.
(Output_section::set_is_unique_segment): New function.
(Output_section::is_unique_segment_): New member.
(Output_section::extra_segment_flags): New function.
(Output_section::set_extra_segment_flags): New function.
(Output_section::extra_segment_flags_): New member.
(Output_section::segment_alignment): New function.
(Output_section::set_segment_alignment): New function.
(Output_section::segment_alignment_): New member.
(Output_segment::Output_segment): Initialize is_unique_segment_.
(Output_segment::is_unique_segment): New function.
(Output_segment::set_is_unique_segment): New function.
(Output_segment::is_unique_segment_): New member.
* plugin.cc (allow_unique_segment_for_sections): New function.
(unique_segment_for_sections): New function.
(Plugin::load): Add new functions to transfer vector.
* Makefile.am (plugin_final_layout.readelf.stdout): Add readelf output.
* Makefile.in: Regenerate.
* testsuite/plugin_final_layout.sh: Check if unique segment
functionality works.
* testsuite/plugin_section_order.c (onload): Check if new interfaces
are available.
(allow_unique_segment_for_sections): New global.
(unique_segment_for_sections): New global.
(claim_file_hook): Call allow_unique_segment_for_sections.
(all_symbols_read_hook): Call unique_segment_for_sections.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* plugin-api.h (ld_plugin_allow_unique_segment_for_sections):
New interface.
(ld_plugin_unique_segment_for_sections): New interface.
(LDPT_ALLOW_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(LDPT_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(tv_allow_unique_segment_for_sections): New member.
(tv_unique_segment_for_sections): New member.
* cygtls.h (_cygtls::push): Inline.
(_cygtls::interrupt_now): Change signal number argument to siginfo_t argument.
(_cygtls::interrupt_setup): Ditto.
(_cygtls::set_siginfo): Delete declaration.
(_cygtls::reset_signal_arrived): Don't reset signal_arrived signal. Just reset
flag.
* exceptions.cc (_cygtls::interrupt_now): Reflect argument changes. Pass si to
interrupt_setup.
(_cygtls::interrupt_setup): Reflect argument changes. Fill out tls infodata
here using passed-in si. Use si.si_signo instead of sig.
(sigpacket::setup_handler): Move this function into sigpacket class. Use si
field from the class as appropriate.
(sigpacket::process): Don't call tls->set_siginfo here since setup_handler
could fail. Eliminate now-unneeded sig argument.
* sigproc.h (sigpacket::setup_handler): Move setup_handler to this class.
read-ahead buffer for reading Windows clipboard if caller's
buffer is too small for complete characters.
* include/limits.h: Remove outdated TODO comment.
* cygtls.cc (_cygtls::operator HANDLE): Return NULL when tid is not set.
* exceptions.cc (setup_handler): Don't try to suspend a thread if it has no
handle.
(_cygtls::set_signal_arrived): Lock creation of signal_arrived.
* cygwait.cc (cancelable_wait): Ignore signal_arrived event if _my_tls 'sig'
element does not exist.
* exceptions.cc (_cygtls::interrupt_setup): Create signal_arrived if recipient
thread has not created it.
DJ Delorie