(user_heap_info::init): Ditto.
* heap.cc (user_heap_info::init): Rename from heap_init(). Avoid explictly
using cygheap->user_heap.
(sbrk): Use user_heap_info method via cygheap->user_heap.
(user_heap_info::sbrk): Renamed from sbrk(). Eliminate explicit use of
cygheap->user_heap. Change some pointer arithmetic to use (char *) for
consistency.
* shared.cc (shared_info::initialize): Change heap_init call to
cygheap->user_heap.init.
reservation and commit strategy when more memory is requested than
available on the heap. Release newly reserved memory if commiting
it fails. Add more comments to explain what we do.
(mtinfo_part::initialize): Ditto for nblock parameter in declaration.
(class mtinfo_drive): Change type of block number to int64_t. Change
all parameters indicating a block number to int64_t in method
declarations.
* fhandler_tape.cc (mtinfo_part::initialize): Ditto in definition.
(mtinfo_drive::get_pos): Ditto. Replace low and high with a
ULARGE_INTEGER and use it's components in call to GetTapePosition.
Store full value in block.
(mtinfo_drive::_set_pos): Change type of count parameter to int64_t.
Change call to SetTapePosition accordingly.
(mtinfo_drive::set_pos): Change type of count parameter to int64_t.
Change local variables holding block numbers accordingly.
(mtinfo_drive::get_status): Don't bail out early if fetching media
parameters fails.
(mtinfo_drive::ioctl): Add explicit cast matching receiving type in
MTTELL and MTIOCPOS calls.
of drives supporting select partitions.
(mtinfo_drive::get_status): Fill in current partition and number of
partitions on tape into mt_resid.
* include/cygwin/mtio.h (struct mtget): Align mt_resid comment to
aforementioned change.
* include/cygwin/version.h (CYGWIN_VERSION_API_MINOR): Bump.
bug disabling creation of two partitions on drives supporting initiator
partitions.
(mtinfo_drive::set_blocksize): Update media information after setting
blocksize succeeded.
(mtinfo_drive::get_status): Fetch fresh media information.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
* nlsfuncs.cc (__get_lcid_from_locale): Update list of Script-only
locales to Windows 8.
(__set_charset_from_locale): Take locales added with Windows 8 and 8.1
into account.
The nightly snapshots we have been creating in the past did not
include the "-cvs" suffix at the end of the version number. Snapshot
packaging started breaking ever since GDB switched to using BFD's
version number. Things got partially fixed with the previous change
to this file, but the change missed the fact that the "-cvs" suffix
in the tarball name (Eg: gdb-7.6.50-20130816-cvs.tar) is undesirable.
This patch removes it.
ChangeLog:
* src-release (VER): When using $(TOOL)/common/create-version.sh,
strip the "-cvs" suffix from the version number if present.
2013-07-10 Jack Howarth <howarth@bromo.med.uc.edu>
PR target/57792
* configure.ac: Use --with-sysroot=\"`xcrun --show-sdk-path`\" on darwin13 and later.
* configure: Regenerated.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
Jeff Johnston