* (mkcategories): Fix a bug that outputs incorrect Unicode category
table for code point ranges.
* (categories.t): Rebuild it using the bug-fixed mkcategories.
This fixes the problem reported in the following post.
https://cygwin.com/ml/cygwin/2018-06/msg00248.html
* fhandler.h (class fhandler_socket_inet): Add variable bool oobinline.
* fhandler_socket_inet.cc (fhandler_socket_inet::fhandler_socket_inet):
Initialize variable oobinline.
(fhandler_socket_inet::recv_internal): Make the handling of OOB data
as consistent with POSIX as possible. Add simulation of inline mode
for OOB data as a workaround for broken winsock behavior.
(fhandler_socket_inet::setsockopt): Ditto.
(fhandler_socket_inet::getsockopt): Ditto.
(fhandler_socket_wsock::ioctl): Fix return value of SIOCATMARK command.
The return value of SIOCATMARK of winsock is almost opposite to
expectation.
* fhandler_socket_local.cc (fhandler_socket_local::recv_internal):
Remove the handling of OOB data from AF_LOCAL domain socket. Operation
related to OOB data will result in an error like Linux does.
(fhandler_socket_local::sendto): Ditto.
(fhandler_socket_local::sendmsg): Ditto.
This fixes the issue reported in following post.
https://cygwin.com/ml/cygwin/2018-06/msg00143.html
Here is the correct patch with both filenames and int cast fixed:
This patch is a complete rewrite of sinf, cosf and sincosf. The new version
is significantly faster, as well as simple and accurate.
The worst-case ULP is 0.56072, maximum relative error is 0.5303p-23 over all
4 billion inputs. In non-nearest rounding modes the error is 1ULP.
The algorithm uses 3 main cases: small inputs which don't need argument
reduction, small inputs which need a simple range reduction and large inputs
requiring complex range reduction. The code uses approximate integer
comparisons to quickly decide between these cases - on some targets this may
be slow, so this can be configured to use floating point comparisons.
The small range reducer uses a single reduction step to handle values up to
120.0. It is fastest on targets which support inlined round instructions.
The large range reducer uses integer arithmetic for simplicity. It does a
32x96 bit multiply to compute a 64-bit modulo result. This is more than
accurate enough to handle the worst-case cancellation for values close to
an integer multiple of PI/4. It could be further optimized, however it is
already much faster than necessary.
Simple benchmark showing speedup factor on AArch64 for various ranges:
range 0.7853982 sinf 1.7 cosf 2.2 sincosf 2.8
range 1.570796 sinf 1.9 cosf 1.9 sincosf 2.7
range 3.141593 sinf 2.0 cosf 2.0 sincosf 3.5
range 6.283185 sinf 2.3 cosf 2.3 sincosf 4.2
range 125.6637 sinf 2.9 cosf 3.0 sincosf 5.1
range 1.1259e15 sinf 26.8 cosf 26.8 sincosf 45.2
ChangeLog:
2018-05-18 Wilco Dijkstra <wdijkstr@arm.com>
* newlib/libm/common/Makefile.in: Regenerated.
* newlib/libm/common/Makefile.am: Add sinf.c, cosf.c, sincosf.c
sincosf.h, sincosf_data.c. Add -fbuiltin -fno-math-errno to CFLAGS.
* newlib/libm/common/math_config.h: Add HAVE_FAST_ROUND, HAVE_FAST_LROUND,
roundtoint, converttoint, force_eval_float, force_eval_double, eval_as_float,
eval_as_double, likely, unlikely.
* newlib/libm/common/cosf.c: New file.
* newlib/libm/common/sinf.c: Likewise.
* newlib/libm/common/sincosf.h: Likewise.
* newlib/libm/common/sincosf.c: Likewise.
* newlib/libm/common/sincosf_data.c: Likewise.
* newlib/libm/math/sf_cos.c: Add #if to build conditionally.
* newlib/libm/math/sf_sin.c: Likewise.
* newlib/libm/math/wf_sincos.c: Likewise.
--
This patch is a complete rewrite of sinf, cosf and sincosf. The new version
is significantly faster, as well as simple and accurate.
The worst-case ULP is 0.56072, maximum relative error is 0.5303p-23 over all
4 billion inputs. In non-nearest rounding modes the error is 1ULP.
The algorithm uses 3 main cases: small inputs which don't need argument
reduction, small inputs which need a simple range reduction and large inputs
requiring complex range reduction. The code uses approximate integer
comparisons to quickly decide between these cases - on some targets this may
be slow, so this can be configured to use floating point comparisons.
The small range reducer uses a single reduction step to handle values up to
120.0. It is fastest on targets which support inlined round instructions.
The large range reducer uses integer arithmetic for simplicity. It does a
32x96 bit multiply to compute a 64-bit modulo result. This is more than
accurate enough to handle the worst-case cancellation for values close to
an integer multiple of PI/4. It could be further optimized, however it is
already much faster than necessary.
Simple benchmark showing speedup factor on AArch64 for various ranges:
range 0.7853982 sinf 1.7 cosf 2.2 sincosf 2.8
range 1.570796 sinf 1.9 cosf 1.9 sincosf 2.7
range 3.141593 sinf 2.0 cosf 2.0 sincosf 3.5
range 6.283185 sinf 2.3 cosf 2.3 sincosf 4.2
range 125.6637 sinf 2.9 cosf 3.0 sincosf 5.1
range 1.1259e15 sinf 26.8 cosf 26.8 sincosf 45.2
ChangeLog:
2018-06-18 Wilco Dijkstra <wdijkstr@arm.com>
* newlib/libm/common/Makefile.in: Regenerated.
* newlib/libm/common/Makefile.am: Add sinf.c, cosf.c, sincosf.c
sincosf.h, sincosf_data.c. Add -fbuiltin -fno-math-errno to CFLAGS.
* newlib/libm/common/math_config.h: Add HAVE_FAST_ROUND, HAVE_FAST_LROUND,
roundtoint, converttoint, force_eval_float, force_eval_double, eval_as_float,
eval_as_double, likely, unlikely.
* newlib/libm/common/cosf.c: New file.
* newlib/libm/common/sinf.c: Likewise.
* newlib/libm/common/sincosf.h: Likewise.
* newlib/libm/common/sincosf.c: Likewise.
* newlib/libm/common/sincosf_data.c: Likewise.
* newlib/libm/math/sf_cos.c: Add #if to build conditionally.
* newlib/libm/math/sf_sin.c: Likewise.
* newlib/libm/math/wf_sincos.c: Likewise.
--
Previously, "test 1 2 3 -a -b -c" was permuted to "test -a -b -c 1 2 3",
but "test 1 2 3 -abc" was left as "test 1 2 3 -abc".
Signed-off-by: Thomas Kindler <mail+newlib@t-kindler.de>
Commit ebd645e on 2001-10-03 made environ.cc:_addenv() add unneeded
space at the end of the environment block to "work around problems
with some buggy applications." This clutters the code and is
presumably no longer needed.
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis.
When backing up tail to handle a "..", the code only checked that
it didn't underrun the destination buffer while removing path
components. It did *not* take into account that the first backslash
in the path had to be kept intact. Example path to trigger the
problem: "C:\A..\..\..\B'
Fix this by moving the dst pointer to the first backslash so subsequent
tests cannot underrun this position. Also make sure that we always
*have* a backslash.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Thanks to Ken Harris <Ken.Harris@mathworks.com> for the diagnosis
which led to a buffer underrun in this loop.
Revert before release.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
- when calculating a correction to align next brk to page boundary,
ensure that the correction is less than a page size
- if allocating the correction fails, ensure that the top size is
set to brk + sbrk_size (minus any front alignment made)
Signed-off-by: Jeff Johnston <jjohnstn@redhat.com>
When converting number of days since epoch (32-bits) to seconds,
calculations using 32-bit `long` overflow for years above 2038. Solve
this by casting number of days to `time_t` just before final
multiplication.
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Previously, hw exception handler stub and interrupt handler stub for microbaze were unable to
be overwritten. Change to weak to fix this.
Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
GCC 7 is able to see straight through this trick, so use a more formal
method to avoid the warning.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
- From: Cesar Philippidis <cesar@codesourcery.com>
Date: Tue, 10 Apr 2018 14:43:42 -0700
Subject: [PATCH] nvptx port
This port adds support for Nvidia GPU's, which are primarily used as
offload accelerators in OpenACC and OpenMP.
There are systems with a MaximumProcessorCount not
reflecting the actually available CPUs. The ActiveProcessorCount
is correct though. So we use ActiveProcessorCount rather than
MaximumProcessorCount per group to set group affinity correctly.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
The gdtoa implementation uses the type long, defined as Long, in lots
of code. For historical reason newlib defines Long as int32_t instead.
This works fine, as long as floating point exceptions are not enabled.
The conversion to 32 bit int can lead to a FE_INVALID situation.
Example:
const char *str = "121645100408832000.0";
char *ptr;
feenableexcept (FE_INVALID);
strtod (str, &ptr);
This leads to the following situation in strtod
double aadj;
Long L;
[...]
L = (Long)aadj;
For instance, on x86_64 the code here is
cvttsd2si %xmm0,%eax
At this point, aadj is 2529648000.0 in our example. The conversion to
32 bit %eax results in a negative int value, thus the conversion is
invalid. With feenableexcept (FE_INVALID), a SIGFPE is raised.
Fix this by always using 64 bit ints here if double is not a 32 bit type
to avoid this type of FP exceptions.
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
* Change set_socket_type/get_socket_type to virtual methods
* Move various variables into af_unix_shmem_t
* Change sun_name_t to match new usage pattern
* Move shut_state definition and add a name for the 0 value
* Allow marking packet as administrative packet. This allows
filtering out info packets exchange between peers and tweak
data accordingly.
* Rename send_my_name to send_sock_info and send credentials
if not called from bind (so the socket was already connected)
* Handle SO_PASSCRED in setsockopt/getsockopt
* Add input size checking to setsockopt/getsockopt
* Use NT functions where appropriate
Signed-off-by: Corinna Vinschen <corinna@vinschen.de>
Corinna Vinschen