all: Update Python code to conform to latest black formatting.

Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2020-08-29 15:14:29 +10:00
parent 0c7354afaf
commit 06659077a8
19 changed files with 50 additions and 42 deletions

View File

@ -74,7 +74,7 @@ class BLESimpleCentral:
def _irq(self, event, data):
if event == _IRQ_SCAN_RESULT:
addr_type, addr, adv_type, rssi, adv_data = data
if adv_type in (_ADV_IND, _ADV_DIRECT_IND,) and _UART_SERVICE_UUID in decode_services(
if adv_type in (_ADV_IND, _ADV_DIRECT_IND) and _UART_SERVICE_UUID in decode_services(
adv_data
):
# Found a potential device, remember it and stop scanning.
@ -97,14 +97,14 @@ class BLESimpleCentral:
elif event == _IRQ_PERIPHERAL_CONNECT:
# Connect successful.
conn_handle, addr_type, addr, = data
conn_handle, addr_type, addr = data
if addr_type == self._addr_type and addr == self._addr:
self._conn_handle = conn_handle
self._ble.gattc_discover_services(self._conn_handle)
elif event == _IRQ_PERIPHERAL_DISCONNECT:
# Disconnect (either initiated by us or the remote end).
conn_handle, _, _, = data
conn_handle, _, _ = data
if conn_handle == self._conn_handle:
# If it was initiated by us, it'll already be reset.
self._reset()

View File

@ -23,7 +23,7 @@ _UART_RX = (
)
_UART_SERVICE = (
_UART_UUID,
(_UART_TX, _UART_RX,),
(_UART_TX, _UART_RX),
)
@ -32,22 +32,20 @@ class BLESimplePeripheral:
self._ble = ble
self._ble.active(True)
self._ble.irq(handler=self._irq)
((self._handle_tx, self._handle_rx,),) = self._ble.gatts_register_services(
(_UART_SERVICE,)
)
((self._handle_tx, self._handle_rx),) = self._ble.gatts_register_services((_UART_SERVICE,))
self._connections = set()
self._write_callback = None
self._payload = advertising_payload(name=name, services=[_UART_UUID],)
self._payload = advertising_payload(name=name, services=[_UART_UUID])
self._advertise()
def _irq(self, event, data):
# Track connections so we can send notifications.
if event == _IRQ_CENTRAL_CONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
print("New connection", conn_handle)
self._connections.add(conn_handle)
elif event == _IRQ_CENTRAL_DISCONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
print("Disconnected", conn_handle)
self._connections.remove(conn_handle)
# Start advertising again to allow a new connection.

View File

@ -46,15 +46,15 @@ class BLETemperature:
def _irq(self, event, data):
# Track connections so we can send notifications.
if event == _IRQ_CENTRAL_CONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
self._connections.add(conn_handle)
elif event == _IRQ_CENTRAL_DISCONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
self._connections.remove(conn_handle)
# Start advertising again to allow a new connection.
self._advertise()
elif event == _IRQ_GATTS_INDICATE_DONE:
conn_handle, value_handle, status, = data
conn_handle, value_handle, status = data
def set_temperature(self, temp_deg_c, notify=False, indicate=False):
# Data is sint16 in degrees Celsius with a resolution of 0.01 degrees Celsius.

View File

@ -87,7 +87,7 @@ class BLETemperatureCentral:
def _irq(self, event, data):
if event == _IRQ_SCAN_RESULT:
addr_type, addr, adv_type, rssi, adv_data = data
if adv_type in (_ADV_IND, _ADV_DIRECT_IND,) and _ENV_SENSE_UUID in decode_services(
if adv_type in (_ADV_IND, _ADV_DIRECT_IND) and _ENV_SENSE_UUID in decode_services(
adv_data
):
# Found a potential device, remember it and stop scanning.
@ -110,14 +110,14 @@ class BLETemperatureCentral:
elif event == _IRQ_PERIPHERAL_CONNECT:
# Connect successful.
conn_handle, addr_type, addr, = data
conn_handle, addr_type, addr = data
if addr_type == self._addr_type and addr == self._addr:
self._conn_handle = conn_handle
self._ble.gattc_discover_services(self._conn_handle)
elif event == _IRQ_PERIPHERAL_DISCONNECT:
# Disconnect (either initiated by us or the remote end).
conn_handle, _, _, = data
conn_handle, _, _ = data
if conn_handle == self._conn_handle:
# If it was initiated by us, it'll already be reset.
self._reset()

View File

@ -20,7 +20,7 @@ _UART_RX = (
)
_UART_SERVICE = (
_UART_UUID,
(_UART_TX, _UART_RX,),
(_UART_TX, _UART_RX),
)
# org.bluetooth.characteristic.gap.appearance.xml
@ -32,9 +32,7 @@ class BLEUART:
self._ble = ble
self._ble.active(True)
self._ble.irq(handler=self._irq)
((self._tx_handle, self._rx_handle,),) = self._ble.gatts_register_services(
(_UART_SERVICE,)
)
((self._tx_handle, self._rx_handle),) = self._ble.gatts_register_services((_UART_SERVICE,))
# Increase the size of the rx buffer and enable append mode.
self._ble.gatts_set_buffer(self._rx_handle, rxbuf, True)
self._connections = set()
@ -50,16 +48,16 @@ class BLEUART:
def _irq(self, event, data):
# Track connections so we can send notifications.
if event == _IRQ_CENTRAL_CONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
self._connections.add(conn_handle)
elif event == _IRQ_CENTRAL_DISCONNECT:
conn_handle, _, _, = data
conn_handle, _, _ = data
if conn_handle in self._connections:
self._connections.remove(conn_handle)
# Start advertising again to allow a new connection.
self._advertise()
elif event == _IRQ_GATTS_WRITE:
conn_handle, value_handle, = data
conn_handle, value_handle = data
if conn_handle in self._connections and value_handle == self._rx_handle:
self._rx_buffer += self._ble.gatts_read(self._rx_handle)
if self._handler:

View File

@ -1 +1 @@
freeze(".", ("webrepl.py", "webrepl_setup.py", "websocket_helper.py",))
freeze(".", ("webrepl.py", "webrepl_setup.py", "websocket_helper.py"))

View File

@ -216,7 +216,10 @@ def main():
default="cc3200_af.csv",
)
parser.add_argument(
"-b", "--board", dest="board_filename", help="Specifies the board file",
"-b",
"--board",
dest="board_filename",
help="Specifies the board file",
)
parser.add_argument(
"-p",

View File

@ -381,7 +381,10 @@ def main():
default="build/pins_af.py",
)
parser.add_argument(
"-b", "--board", dest="board_filename", help="Specifies the board file",
"-b",
"--board",
dest="board_filename",
help="Specifies the board file",
)
parser.add_argument(
"-p",

View File

@ -515,7 +515,10 @@ def main():
action="store_true",
)
parser.add_argument(
"-b", "--board", dest="board_filename", help="Specifies the board file",
"-b",
"--board",
dest="board_filename",
help="Specifies the board file",
)
parser.add_argument(
"-p",

View File

@ -370,7 +370,10 @@ def main():
default="build/pins_af.py",
)
parser.add_argument(
"-b", "--board", dest="board_filename", help="Specifies the board file",
"-b",
"--board",
dest="board_filename",
help="Specifies the board file",
)
parser.add_argument(
"-p",

View File

@ -17,7 +17,7 @@ pattern = re.compile(r"[\n;]\s*MP_REGISTER_MODULE\((.*?),\s*(.*?),\s*(.*?)\);",
def find_c_file(obj_file, vpath):
""" Search vpaths for the c file that matches the provided object_file.
"""Search vpaths for the c file that matches the provided object_file.
:param str obj_file: object file to find the matching c file for
:param List[str] vpath: List of base paths, similar to gcc vpath
@ -36,7 +36,7 @@ def find_c_file(obj_file, vpath):
def find_module_registrations(c_file):
""" Find any MP_REGISTER_MODULE definitions in the provided c file.
"""Find any MP_REGISTER_MODULE definitions in the provided c file.
:param str c_file: path to c file to check
:return: List[(module_name, obj_module, enabled_define)]
@ -52,7 +52,7 @@ def find_module_registrations(c_file):
def generate_module_table_header(modules):
""" Generate header with module table entries for builtin modules.
"""Generate header with module table entries for builtin modules.
:param List[(module_name, obj_module, enabled_define)] modules: module defs
:return: None

View File

@ -34,7 +34,7 @@ async def gather_task():
async def main():
# Simple gather with return values
print(await asyncio.gather(factorial("A", 2), factorial("B", 3), factorial("C", 4),))
print(await asyncio.gather(factorial("A", 2), factorial("B", 3), factorial("C", 4)))
# Cancel a multi gather
# TODO doesn't work, Task should not forward cancellation from gather to sub-task

View File

@ -6,7 +6,7 @@ except ImportError:
desc = {
"s0": uctypes.UINT16 | 0,
"sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
"sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
"arr": (uctypes.ARRAY | 0, uctypes.UINT8 | 2),
"arr2": (uctypes.ARRAY | 0, 2, {"b": uctypes.UINT8 | 0}),
"bitf0": uctypes.BFUINT16 | 0 | 0 << uctypes.BF_POS | 8 << uctypes.BF_LEN,

View File

@ -16,7 +16,7 @@ if sys.byteorder != "little":
desc = {
"s0": uctypes.UINT16 | 0,
"sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
"sub": (0, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
"arr": (uctypes.ARRAY | 0, uctypes.UINT8 | 2),
"arr2": (uctypes.ARRAY | 0, 2, {"b": uctypes.UINT8 | 0}),
"bitf0": uctypes.BFUINT16 | 0 | 0 << uctypes.BF_POS | 8 << uctypes.BF_LEN,

View File

@ -28,7 +28,7 @@ S5 = {
"b": uctypes.UINT32 | 4,
"c": uctypes.UINT8 | 8,
"d": uctypes.UINT32 | 0,
"sub": (4, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1,}),
"sub": (4, {"b0": uctypes.UINT8 | 0, "b1": uctypes.UINT8 | 1}),
}
assert uctypes.sizeof(S5) == 12

View File

@ -22,7 +22,7 @@ for r in base_values:
test_values_non_zero.append(complex(r, -i))
if r != 0.0 and i != 0.0:
test_values_non_zero.append(complex(-r, -i))
test_values = [complex(0.0, 0.0),] + test_values_non_zero
test_values = [complex(0.0, 0.0)] + test_values_non_zero
print(test_values)
functions = [

View File

@ -62,10 +62,10 @@ binary_functions = [
copysign,
[(23.0, 42.0), (-23.0, 42.0), (23.0, -42.0), (-23.0, -42.0), (1.0, 0.0), (1.0, -0.0)],
),
("pow", pow, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
("atan2", atan2, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
("fmod", fmod, ((1.0, 1.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0),)),
("ldexp", ldexp, ((1.0, 0), (0.0, 1), (2.0, 2), (3.0, -2), (-3.0, -4),)),
("pow", pow, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
("atan2", atan2, ((1.0, 0.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
("fmod", fmod, ((1.0, 1.0), (0.0, 1.0), (2.0, 0.5), (-3.0, 5.0), (-3.0, -4.0))),
("ldexp", ldexp, ((1.0, 0), (0.0, 1), (2.0, 2), (3.0, -2), (-3.0, -4))),
(
"log",
log,

View File

@ -40,7 +40,7 @@ functions = [
("erf", erf, test_values),
("erfc", erfc, test_values),
("gamma", gamma, pos_test_values),
("lgamma", lgamma, pos_test_values + [50.0, 100.0,]),
("lgamma", lgamma, pos_test_values + [50.0, 100.0]),
]
for function_name, function, test_vals in functions:

View File

@ -908,7 +908,7 @@ def build_mpy(env, entry_offset, fmpy, native_qstr_vals, native_qstr_objs):
# MPY: header
out.write_bytes(
bytearray(
[ord("M"), MPY_VERSION, env.arch.mpy_feature, MP_SMALL_INT_BITS, QSTR_WINDOW_SIZE,]
[ord("M"), MPY_VERSION, env.arch.mpy_feature, MP_SMALL_INT_BITS, QSTR_WINDOW_SIZE]
)
)