mibi88
b664e0ab9c
Proper python ram use
2022-11-23 17:11:41 +01:00
mibi88
e3bda720ff
1 more test.
2022-11-23 16:27:27 +01:00
mibi88
b39dc00203
Added python ram in a dirty way
2022-11-23 13:56:48 +01:00
mibi88
f9d6f55625
Forgot to change the default font.
2022-11-21 17:31:22 +01:00
mibi88
c6e1666918
Little fixes
2022-11-20 16:47:22 +01:00
mibi88
2ace52aff9
Fixed draw_string(), font size not ignored anymore on fx9860
2022-11-20 15:49:10 +01:00
mibi88
a6fb6122db
Fixed set_pixel()
2022-11-20 13:13:40 +01:00
mibi88
6fcce03e5c
Fixed get_pixel()
2022-11-20 12:44:43 +01:00
Lephenixnoir
eeae10abc5
ports/sh: start adding decent memory on fx-CG 50 (~ 350 kB)
2022-11-10 23:02:20 +01:00
Lephenixnoir
c1d2ca5048
pe: debugging tools
2022-11-10 22:37:04 +01:00
Lephenixnoir
524562e8bc
pe: casioplot: make the final argument of draw_string() optional
...
(note: it is currently ignored even when specified)
2022-11-09 21:21:34 +01:00
Lephenixnoir
ab0f70effc
pe: fix clear_screeb typo in modcasioplot
2022-11-09 13:57:13 +01:00
Lephenixnoir
99f2156e5e
pe: interrupt computations with AC/ON
2022-11-08 22:24:18 +01:00
Lephenixnoir
bfa5de2cf9
meta: exclude ports/sh/exclude from git
2022-11-08 22:24:17 +01:00
Lephenixnoir
9ea4c17112
pe: import modules selected in file browser
2022-11-08 22:21:42 +01:00
Lephenixnoir
5f1a066c94
pe: add rough casioplot module
2022-11-08 22:20:18 +01:00
Lephenixnoir
6c2aa39e56
pe: show shell modifier state in GUI
2022-11-06 17:08:17 +01:00
Lephenixnoir
404d69aea4
pe: smaller, proportional 4x6 font on fx
2022-11-06 00:08:57 +01:00
Lephenixnoir
27822c2461
pe: make the GUI friendly on the fx-9860G
2022-11-05 20:58:18 +01:00
Lephenixnoir
fa6aa00dae
pe: basic GUI setup
...
Adds a file browser (selected files are not loaded yet) and a shell
widget with an input system that is still better than the previous
VT-100 emulation scheme (with locked modifiers mainly).
A lot of small things still need to be done to make the UI functional.
2022-11-05 18:25:54 +01:00
Lephenixnoir
4e529b5788
meta: add project headers
...
On all but a few files that are not going to stay there.
2022-10-30 18:52:54 +01:00
Lephenixnoir
2c238906e7
pe: enable the time module
...
Based on the UNIX port version, and extmod/utime_mphal.c.
2022-10-30 18:37:02 +01:00
Lephenixnoir
8809f3eee4
pe: cap shell refresh rate at 30 FPS
2022-10-30 17:53:13 +01:00
Lephenixnoir
d0654fc5e7
meta: basic build instructions
2022-10-30 11:07:33 +01:00
Lephenixnoir
d6334be488
meta: cleanup
2022-10-29 21:48:01 +02:00
Lephenixnoir
3431000d2f
meta: README file with basic TODO list
2022-10-29 20:56:10 +02:00
Lephenixnoir
ce4fefebbe
pe: split fx-CG 50 and fx-9860G III versions
...
Both working although with terrible UI.
2022-10-29 20:42:43 +02:00
Lephenixnoir
e1df7e5f0b
ports/sh: enable split GC
2022-10-29 11:32:43 +02:00
Lephenixnoir
f930ff95db
modgint: basic gint module with some of <gint/keyboard.h>
2022-10-29 10:57:15 +02:00
Lephenixnoir
1992ec0a49
ports/sh: module loading and first attempt at open()
...
But I'm pretty sure there should be a ready-to-use POSIX version of
open() that I can enable instead of rewriting it.
2022-10-29 10:55:57 +02:00
Lephenixnoir
c237e9874f
ports/sh: clean mpconfigport.h and enable modules
2022-10-27 19:07:22 +02:00
Lephenixnoir
a0d6c33275
meta: move original README.md
2022-10-27 17:20:32 +02:00
Lephenixnoir
f9b4c1f844
pe: decent console with erasing, scrolling and more unused potential
2022-10-24 00:53:53 +02:00
Lephenixnoir
e33d85b1de
ports/sh: first functional version, can compute in REPL
2022-10-24 00:48:14 +02:00
Damien George
68f166dae9
extmod/mbedtls: Remove brainpool curves from config.
...
They are much slower than NIST (SECP) curves and shouldn't be needed.
Reduces rp2 PICO_W firmware by 1328 bytes.
Thanks to @Carglglz for the information.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:12:46 +11:00
Damien George
e24159dec9
extmod/mbedtls: Remove MBEDTLS_ECP_DP_CURVE25519_ENABLED config.
...
Curve25519 arithmetic is supported in mbedtls, but it's not used for TLS.
So there's no need to have this option enabled.
Reduces rp2 PICO_W firmware by 2440 bytes.
Thanks to @Carglglz for the information.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:12:46 +11:00
Damien George
8874a09119
extmod/mbedtls: Enable elliptic curve DH and DSA cryptography.
...
This is necessary to access sites that only support these protocols.
The rp2 port already has ECDH enabled, so this just adds ECDSA there. The
other ports now gain both ECDH and ECDSA. The code size increase is:
- rp2 (PICO_W): +2916 bytes flash, +24 bytes BSS
- stm32 (PYBD_SF6): +20480 bytes flash, +32 bytes data, +48 bytes BSS
- mimxrt (TEENSY41): +20708 bytes flash, +32 bytes data, +48 bytes BSS
- unix (standard x86-64): +39344 executable, +1744 bytes data, +96 BSS
This is obviously a large increase in code size. But there doesn't seem to
be any other option because without elliptic curve cryptography devices are
partially cut off from the internet. For use cases that require small
firmware size, they'll need to build custom firmware with a custom mbedtls
config.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:08:21 +11:00
Damien George
9347545f9e
extmod/mbedtls: Enable MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE.
...
This was already enabled on all ports except mimxrt. Now it's enabled on
all of them.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:06:21 +11:00
Damien George
b337678964
extmod/mbedtls: Add common configuration file, and use it in all ports.
...
This is a no-op change.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 19:06:21 +11:00
Damien George
67f98ba10c
extmod/btstack: Update BTstack bindings to work with latest BTstack.
...
The following multi-tests pass (eg with PYBD_SF6+LEGO_HUB_NO6):
ble_gap_advertise.py
ble_gap_connect.py
ble_gap_device_name.py
ble_gattc_discover_services.py
ble_gatt_data_transfer.py
perf_gatt_char_write.py
perf_gatt_notify.py
stress_log_filesystem.py
These are the same tests that passed prior to this BTstack update.
Also tested on the unix port using H4 transport.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 14:28:25 +11:00
Damien George
4f946ba963
lib/btstack: Update to v1.5.3.
...
Signed-off-by: Damien George <damien@micropython.org>
2022-10-22 13:21:28 +11:00
iabdalkader
93f3910fe7
nrf: Rename machine I2C, PWM, SPI, UART types consistently across ports.
...
This renames:
- machine_hard_i2c_type -> machine_i2c_type
- machine_hard_pwm_type -> machine_pwm_type
- machine_hard_spi_type -> machine_spi_type
- machine_hard_uart_type -> machine_uart_type
2022-10-22 12:58:54 +11:00
iabdalkader
5e90ec2331
zephyr: Rename machine I2C and SPI types consistently across ports.
...
This renames:
- machine_hard_i2c_type -> machine_i2c_type
- machine_hard_spi_type -> machine_spi_type
2022-10-22 12:58:21 +11:00
iabdalkader
bfa6f34404
renesas-ra: Rename machine SPI type consistently across ports.
...
This renames:
- machine_hard_spi_type -> machine_spi_type
2022-10-22 12:57:58 +11:00
iabdalkader
e275a58ac1
samd: Rename machine I2C type consistently across ports.
...
This renames:
- machine_hw_i2c_type -> machine_i2c_type
2022-10-22 12:57:32 +11:00
iabdalkader
22ad45fda6
rp2: Rename machine I2C type consistently across ports.
...
This renames:
- machine_hw_i2c_type -> machine_i2c_type
2022-10-22 12:56:58 +11:00
iabdalkader
427670c210
esp32: Rename machine I2C and SPI types consistently across ports.
...
This renames:
- machine_hw_i2c_type -> machine_i2c_type
- machine_hw_spi_type -> machine_spi_type
2022-10-22 12:56:10 +11:00
iabdalkader
af4ba6d1b4
stm32: Rename machine I2C and SPI types consistently across ports.
...
This renames:
- machine_hard_i2c_type -> machine_i2c_type
- machine_hard_spi_type -> machine_spi_type
2022-10-22 12:54:42 +11:00
Damien George
965a87b53c
tests/extmod: Add test for sleep_ms value that overflows ticks.
...
Addresses #9516 .
Signed-off-by: Damien George <damien@micropython.org>
2022-10-14 16:10:38 +11:00
Damien George
815920c87f
extmod/utime_mphal: Make ticks_add check for overflow of delta.
...
Work done in collaboration with @jimmo.
Signed-off-by: Damien George <damien@micropython.org>
2022-10-14 15:54:53 +11:00