Newer MCU series have additional fields in the struct which need to be
initialised to zero, eg Break2AFMode on WB55.
This work was funded by Planet Innovation.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Increase asyncio tests timeouts to account for different WiFi modules and
CPU clocks on different boards.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
sdkconfig.base: Add CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=y.
This reduces time to boot from deepsleep by at least 200ms and can
provide significant power savings for deepsleep-based battery
applications.
docs/library/esp32.rst: Add note cautioning not to enter deepsleep after
changing the boot partition, without first performing a hard reset.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
And use it in the Bluetooth bindings instead of setting the baudrate by a
call to the NXP lib.
Also fixes machine_uart.c to work with a baud rate of 921600.
Signed-off-by: robert-hh <robert@hammelrath.com>
- Superfluous comments in MP_DEFINE_CONST_OBJ_TYPE stop correct macro
expanding.
- MP_ERROR_TEXT now gives mp_rom_error_text_t, but we want plain const
char *.
Signed-off-by: David Yang <mmyangfl@gmail.com>
It appears a new session ticket being issued by the server right after
completed handshake is not uncommon and shouldn't be treated as fatal.
mbedtls itself states "This error code is experimental and may be changed
or removed without notice."
Signed-off-by: Mirko Vogt <mirko-dev|mpy@nanl.de>
Whenever the PSA interface is used (if MBEDTLS_PSA_CRYPTO is defined),
psa_crypto_init() needs to be called to initialise the global PSA data
struct, before any PSA related operations.
TLSv1.3 depends on the PSA interface, TLSv1.2 only uses the PSA stack if
MBEDTLS_USE_PSA_CRYPTO is defined.
Without psa_crypto_init() every PSA related call will result in
-0x6C00/-27648 which translates to "SSL - Internal error (eg, unexpected
failure in lower-level module)".
The error is misleading, especially since mbedtls in its docs itself
advices "to return #PSA_ERROR_BAD_STATE or some other applicable error.".
Signed-off-by: Mirko Vogt <mirko-dev|mpy@nanl.de>
In CPython, `_thread.start_new_thread()` returns an ID that is the same ID
that is returned by `_thread.get_ident()`. The current MicroPython
implementation of `_thread.start_new_thread()` always returns `None`.
This modifies the required functions to return a value. The native thread
id is returned since this can be used for interop with other functions, for
example, `pthread_kill()` on *nix. `_thread.get_ident()` is also modified
to return the native thread id so that the values match and avoids the need
for a separate `native_id` attribute.
Fixes issue #12153.
Signed-off-by: David Lechner <david@pybricks.com>
When calling ppp.active(False) we could get a crash due to immediately
returning after asking FreeRTOS to delete the current task.
This commit adds a simple blocking loop, the same as used in all other
places where we call vTaskDelete(NULL).
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Showing the period alway as microsecond quantities, since tick_hz is
assumed as 1_000_000 if the period is given by freq=xxx. If the period is
larger than 0xffffffff, the value is divided by 1000 and "000" is appended
in the display. That works for periods up to about 50 days.
Signed-off-by: robert-hh <robert@hammelrath.com>
Also provide a basic README.md for dynamic native modules.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Needed for mip to find a default location to install to.
Like esp32, samd uses "/" as the mount point for the flash. Make _boot.py
add the entry after successfully mounting.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
If we're reading from an UART with a non-zero timeout, we can release the
GIL so that other threads/tasks may run while we are sleeping waiting for
data to arrive.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
CONFIG_USB_OTG_SUPPORTED is automatically set by the ESP-IDF when the chip
supports USB-OTG, which is the case for the ESP32-S2 and ESP32-S3.
When trying to use the JTAG console with these chips, it would not work
because our USB implementation will take over control over the USB port,
breaking the JTAG console in the process.
Thus, when the board is configured to use the JTAG console, we should not
enable our USB console support.
Additionally, this change also frees up UART0 when an USB-based console is
configured, since there's no reason to prevent (re)configuration of UART0
for other uses in that case.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
This implements support for SO_BINDTODEVICE, which allows telling a socket
to use a specific interface instead of lwIP automatically selecting one.
This allows devices that have multiple connections (for example cellular
over PPP in addition to WLAN) to explicitly choose which data is send over
which connection, which may have different reliability and or (mobile data)
costs associated with using them.
The used lwIP network stack already has support for this, so all that was
needed was to expose this functionality in MicroPython. This commit
exposes a new constant SO_BINDTODEVICE which can be set as an socket
option. As a value it expects the name of the interface to bind to. These
names can be retrieved using `.config('ifname')` implemented on each
interface type (including adding in this commit a `.config()` method to
PPP, which it didn't have before), which returns a string with the
interface name:
>>> import machine
>>> import network
>>> network.WLAN(network.AP_IF).config('ifname')
'lo0'
>>> wlan = network.WLAN(network.AP_IF)
>>> wlan.active(True) and wlan.config('ifname')
'ap1'
>>> wlan = network.WLAN(network.STA_IF)
>>> wlan.active(True) and wlan.config('ifname')
'st1'
>>> ppp = network.PPP(machine.UART(0))
>>> ppp.active(True) and ppp.config('ifname')
'pp1'
>>> ppp = network.PPP(machine.UART(0))
>>> ppp.active(True) and ppp.config('ifname')
'pp2'
>>> ppp = network.PPP(machine.UART(0))
>>> ppp.active(True) and ppp.config('ifname')
'pp3'
Note that lo0 seems to be returned by lwIP if the interface is not yet
active. The method can also return None in the case of PPP where the
entire lwIP interface doesn't yet exist before being activated. Currently
no effort is made to unify those cases; it is expected that whatever we
receive from lwIP is valid.
When the socket option is set, this forces using a specific device:
import socket
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_BINDTODEVICE, 'st1')
setsockopt will throw (OSError: [Errno 19] ENODEV) if the specified
interface does not exist.
Tested with LAN, WLAN, and PPP; can specify which interface should be used
and when testing with, for example, HTTP requests to ifconfig.co the
returned IP address confirms a specific interface was used.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Add the buffer attribute to sys.stdin, sys.stdout and sys.stderr. This
provides raw access to underlying stdio streams for the unix port (and
others that use VfsPosix).
Signed-off-by: stephanelsmith <stephane.smith@titansensor.com>
On macOS, if running micropython from subprocess.check_output, then a
stdout.flush() raises error 45.
Here's a test case. This will run fine on linux, but crashes on macOS with
error 45.
import sys
import subprocess
import tempfile
with tempfile.NamedTemporaryFile('w') as fp:
fp.write('''
import sys
sys.stdout.write('hello world')
sys.stdout.flush()
print('')
''')
fp.flush()
print('py3')
o = subprocess.check_output(f'python3 {fp.name}'.split())
print(o)
print('upy')
o = subprocess.check_output(f'micropython {fp.name}'.split())
print(o)
On macOS:
py3
b'hello world\n'
upy
Traceback (most recent call last):
File "...", line 4, in <module>
OSError: 45
On unix:
py3
b'hello world\n'
upy
b'hello world\n'
Signed-off-by: stephanelsmith <stephane.smith@titansensor.com>
Because mpy_ld.py doesn't know the target object representation, it emits
instances of `MP_OBJ_NEW_QSTR(MP_QSTR_Foo)` as const string objects, rather
than qstrs. However this doesn't work for map keys (e.g. for a locals dict)
because the map has all_keys_are_qstrs flag is set (and also auto-complete
requires the map keys to be qstrs).
Instead, emit them as regular qstrs, and make a functioning MP_OBJ_NEW_QSTR
function available (via `native_to_obj`, also used for e.g. making
integers).
Remove the code from mpy_ld.py to emit qstrs as constant strings, but leave
behind the scaffold to emit constant objects in case we want to do use this
in the future.
Strictly this should be a .mpy sub-version bump, even though the function
table isn't changing, it does lead to a change in behavior for a new .mpy
running against old MicroPython. `mp_native_to_obj` will incorrectly return
the qstr value directly as an `mp_obj_t`, leading to unexpected results.
But given that it's broken at the moment, it seems unlikely that anyone is
relying on this, so it's not work the other downsides of a sub-version bump
(i.e. breaking pure-Python modules that use @native). The opposite case of
running an old .mpy on new MicroPython is unchanged, and remains broken in
exactly the same way.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Sections sometimes named .rodata.str1.1 etc, instead of just .rodata.
Avoid crashing in that case. Instead treat it like any other RO section.
Fix thanks to @phlash.
Fixes issue #8783.
Signed-off-by: Jon Nordby <jononor@gmail.com>
This adds support for the x format code in struct.pack and struct.unpack.
The primary use case for this is ignoring bytes while unpacking. When
interfacing with existing systems, it may often happen that you either have
fields in a struct that aren't properly specified or you simply don't care
about them. Being able to easily skip them is useful.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Eliminate `TypeError` when format string contains no named conversions.
This matches CPython behavior.
Signed-off-by: mcskatkat <mc_skatkat@hotmail.com>
The "true" command by default is unavailable on windows so use
an equivalent which works on both unix and windows.
Signed-off-by: stijn <stijn@ignitron.net>
With using UART FIFO, the timeout should be long enough that FIFO becomes
empty. Since previous data transfer may be ongoing, the timeout must be
timeout_char multiplied by FIFO size + 1.
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
Since commit 3533924c36 the zlib module has
been replaced by the new deflate module. This commit updates the script
fwupdate.py to use the new deflate module.
Signed-off-by: Oliver Joos <oliver.joos@hispeed.ch>
The primary purpose of this commit is to make decompress default to
wbits=15 when the format is gzip (or auto format with gzip detected). The
idea is that someone decompressing a gzip stream should be able to use the
default `deflate.DeflateIO(f)` and it will "just work" for any input
stream, even though it uses a lot of memory.
This is done by making uzlib report gzip files as having wbits set to 15
in their header (where it previously only set the wbits out parameter for
zlib files), and then fixing up the logic in `deflateio_init_read`.
Updates the documentation to match.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Damien George