Nothing interesting in this commit, just moving files around, making
sure every target compiles every file, and controlling with macros
instead.
Basic support for fxg3a target in CMakeLists.txt, cmake/FindGint.cmake,
giteapc.make and include/gint/config.h.in. The rest is forgettable.
* Add options to RESET, go to menu, or abort()
* Define weak symbols for driver functions so that low-level debugging
add-ins can be linked with minimal drivers (CPU/INTC/MMU)
* Create a heap arena over the OS stack, large enough to hold two VRAMs
as was previously done, unless GINT_NO_OS_STACK is set at compile
time. (This replaces GINT_USER_VRAM.)
* Allocate a single VRAM in the heap at startup.
* Use double buffering by default as triple buffering is almost entirely
useless. dudpate() waits if both VRAMs are identical to prevent
corruption, but this can be bypassed with R61524 functions as usual.
This adds about 180 kB of heap data to any add-in using default
settings.
This parameter controls the maximum number of glyphs to print.
For backwards compatibility, it is automatically inserted by a macro in
older calls with only 7 parameters.
When switching to dynamic TLB the counting of mapped memory was no
longer required at boot time. This was restored weirdly for fx-CG 50 and
not at all for fx-9860G; this is now fixed.
* Specify a line height for the default fx-CG 50 font so that the height
returned by dsize() is correctly 9, not 11.
* Adjust vertical and horizontal alignment in dtext_opt() and
dprint_opt() by a full pixel (DTEXT_BOTTOM, DTEXT_RIGHT) and half a
pixel (DTEXT_MIDDLE, DTEXT_CENTER) to make sure that the specified
position is within rendered text (as in DTEXT_LEFT and TEXT_TOP) and
to improve centering of strings with odd width or odd height, for
which there is only one valid position.
This commit introduces custom character spacing with a new fxconv
parameter "char-spacing". Word spacing is also tied to the width of the
space character (0x20). This removes the need for special semantics on
the space character, but requires that its size be specified with gray
pixels for proportional fonts.
This also fixes problems with the size of spaces in dsize() not being
correlated with their size during rendering, since on fx-9860G topti
already used the glyph's with as word spacing.
Since fxconv changes but gint's Makefile does not track updates to
external tools, a full rebuild of gint is required past this commit.
This change modifies the font_t type to replace the concept of charset
with a more generic list of non-overlapping Unicode blocks defined by a
starting code point and a size.
It also takes advantage of the assembly feature of fxconv, introduced
for libimg long after the first version of topti, to support pointers in
the converted structure rather than having to tediously compute offsets
within a variable-size structure.
* Define dgray() to replace gray_start() and gray_stop()
* Introduce a mechanism to override the d*() functions rather than using
another set of functions, namely g*(). Gray rendering should now be
done with d*() (a compatibility macro for g*() is available until v2.1).
* Gray engine now reserves TMU0 at the start of the add-in to prevent
surprises if timers are exhausted, so it nevers fails to start
* Replace other gray engine functions with dgray_*()
* More general rendering functions (in render/) to lessen the burden of
porting them to the gray engine. As a consequence, dtext_opt(),
dprint_opt() and drect_border() are now available in the gray engine,
which was an omission from 230b796.
* Allow C_NONE in more functions, mainly on fx-CG 50
* Remove the now-unused dupdate_noint()
This change adds a new HWCALC model, HWCALC_FXCG_MANAGER, which
identifies Casio's official fx-CG Manager software. Both the Prizm and,
to my surprise, the fx-CG Manager use the old RAM address of 88000000
(P1) and a8000000 (P2) instead of the new fx-CG 50 address of 8c000000
(P1) and ac000000 (P2).
The VRAM is hence adjusted at startup to move hardcoded pointers into
the proper space. Added to the kernel moving the VBR space dynamically
on the Prizm, this allows gint to be fully compatible with these
platforms.
The fx-CG Manager is detected by its product ID made of 0xff.
Also adds a proper interface to the R61524 driver, even though it's not
any more complete than previously, and fixes an oversight where the
HWURAM entry of the kernel data array was no longer computed since the
TLB management change.
As of now, the fx-CG Manager still has a bug regarding return-to-menu
since returning from the main menu doesn't work very well and often
loops. This has been seen occasionally on some Graph 90+E so it's
unlikely to be a platform-specific problem.
This change introduces two new functions dtext_opt() and dprint_opt()
that have both color and alignment options. The regular dtext() and
dprint() have been changed to always used bg=C_NONE which is what most
calls want.
This change adds a TLB miss handler that calls __TLB_LoadPTEH() and
removes the startu mapping of add-in pages in the explore() routine of
src/core/start.c.
Note that calling __TLB_LoadPTEH() manually might unexpectedly lead to a
TLB multihit problem as the requested page might be accidentally loaded
by a TLB miss in the code that loads it. A TLB multihit is a platform
reset, so this function should always be considered unsafe to call
(unless the calling code is in a combination of P1 space and ILRAM).
This change also moves a lot of functions out of the .pretext section,
notably topti, as this was designed to allow panic messages when the
add-in couldn't be mapped entirely. By contrast, a GMAPPED macro has
been defined to mark crucial kernel code and data that must remain
mapped at all times. This currently puts the data in ILRAM because
static RAM is not executable. An alternative will have to be found for
SH3-based fx9860g machines.
This version still does not allow TLB misses in timer callbacks and
breaks return-to-menu in a severe way! It is not suitable for any
stable application!
A missing coordinate check in gint_dhline() would allow lines entirely
out of bounds of the screen to write pixels outside of their expected
range, often wrapping up to the next line, but possibly overflowing from
VRAM.
t6k11: use the gint array for variant detection
r61524: use true triple buffering by default
display: define DWIDTH and DHEIGHT
display: add C_RGB(r,g,b) (0 ≤ r,g,b ≤ 31) [fxcg50]
This macro used to protect the declaration of the [vram] variable of
gint. This variable was short to keep drawing functions short but could
clutter the namespace.
That being said, it's even better to just [#define vram gint_vram] if
you need. This change renames the variable to [gint_vram], exposes it
whenever <gint/display.h> is included, and removes the GINT_NEED_VRAM
macro altogether.
Behave like Basic's Horizontal and Vertical commands. Internal dline()
optimizations are renamed gint_dhline() and gint_dvline().
Also supports ghline() and gvline() in the gray engine.
Optimization cases here are amost negligible due to limiting RAM access
frequencies and the very limited amount of work accomplished in the
functions. Code maintainability is prioritized by using dline().
This commit introduces bopti for fxcg50 with the first basic 16-bit
formats. The performance is rather slow, especially for large images,
and will need refinements and/or overclock to be really efficient in
full-screen real-time applications.
Lephe
lephe