PR bootstrap/25670
* Makefile.tpl ([+compare-target+]): Print explanation messages.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.
* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.
* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`. Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.
* Makefile.in: Regenerate.
* configure: Regenerate.
Sync from gcc:
2006-01-04 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/24252
* Makefile.def (flags_to_pass): Add STAGE1_CFLAGS and STAGE1_LANGUAGES.
* Makefile.tpl (OBJDUMP): New.
(EXTRA_HOST_FLAGS): Add it.
(EXTRA_GCC_FLAGS): Remove flags already specified in flags_to_pass.
* Makefile.tpl (stage[+id+]-start, stage[+id+]-end): Do not try
to use symbolic links between directories. Avoid race conditions
or make them harmless.
* configure.in: Do not try to use symbolic links between directories.
* Makefile.def (LEAN): Pass.
* Makefile.tpl (LEAN): Define.
(stage[+id+]-start): Accept that the previous directory does not
exist, if the bootstrap is lean.
(stage[+id+]-bubble): Invoke lean bootstrap commands after
stage[+id+]-start. Use a makefile variable and an `if' instead of a
configure substitution.
([+compare-target+]): Likewise.
([+bootstrap-target+]-lean): New.
* configure.in: Remove lean bootstrap support from here.
* Makefile.in: Regenerate.
* configure: Regenerate.
2006-01-02 Andreas Schwab <schwab@suse.de>
* configure.in: When reconfiguring remove Makefile in
all stage directories.
* configure: Regenerate.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
* Makefile.tpl (CONFIGURE_GDB_TK, INSTALL_GDB_TK): New variables.
(configure-gdb, install-gdb): New rules.
* configure.in: Set CONFIGURE_GDB_TK and INSTALL_GDB_TK.
* Makefile.in, configure: Regenerated.
PR bootstrap/24297
* Makefile.tpl (do-[+make-target+], do-check, install,
stage[+id+]-bubble, [+compare-target+]): Ensure $$r and $$s
are set before recursing.
* Makefile.in: Regenerate.
PR bootstrap/22340
* configure.in (default_target): Remove.
* Makefile.tpl (all): Do not use prerequisites as subroutines
(all) [gcc-bootstrap]: Bootstrap gcc first if it was not done yet.
(do-[+make_target+], check, install, [+bootstrap_target+]): Do not
use prerequisites as subroutines.
(check-host, check-target): New.
(bootstrap configure & all targets): Do not use stage*-start
if the directory layout is already ok.
(non-bootstrap configure & all targets): Prepend a $(unstage).
(stage[+id+]-bubble): Do that here. Do not use NOTPARALLEL.
(NOTPARALLEL): Remove.
(unstage, stage variables): New variables.
(unstage, stage targets): Simply expand to those variables.
* configure: Regenerate.
* Makefile.in: Regenerate.
* Makefile.tpl (BUILD_CONFIGARGS): Include --with-build-subdir.
(TARGET_CONFIGARGS): Include --with-target-subdir.
(configure, all): New macros. Use them throughout.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
PR bootstrap/17383
* Makefile.def (target_modules): Remove stage parameter,
it is always true now.
* Makefile.tpl (configure-build-[+module+],
configure-target-[+module+]): Always build symlink tree
for the directory and for include. BUILD_SUBDIR and
TARGET_SUBDIR cannot be . anymore.
* Makefile.in: Regenerate.
* configure.in: Remove all instances of build-fixincludes from
noconfigdirs.
(build_configargs): Supply --target to subdirectories.
* configure: Regenerate.
* Makefile.def: Make gcc install depend on fixincludes install.
* Makefile.in: Regenerate.
Carlos O'Donell